Used Vertical Stacker for sale (9,074)

Condition: used, Year of construction: 2007, x-travel 660 mm y-travel 350 mm z-travel 450 mm Fjdozrh Rljpfx Adrspk Control Ultimax In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine is operational. The X-axis ball screw is making noise and should be replaced soon. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 1983, Faceplate diameter: 1250 mm Max. swing diameter: 1400 mm Max. swing height: 1160 mm Max. ram stroke, vertical / horizontal: 755 / 840 mm Table load capacity: unlimited Faceplate speed range: 5.6 - 300 rpm Vertical slide angular adjustment: 45° Feed rate range: 0.044-8 mm/rev Fpsdpfey Ex Epjx Adrjk Rapid traverse rate: 2 m/min Drive power: 55 kW Footprint L x W x H: 2660 x 2710 x 3360 mm Total weight: 16,500 kg Accessories / Special features: • 2-axis digital display, manufacturer: ACU-Rite • Faceplate, Ø 1250 mm, with 4 chuck jaws • 5-position turret • Taper turning • Profile turning Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2015, STILL EGV S 14 (2015) Serial number: F20221F00330 The truck is supplied with a charger included. Fsdpey Nagpefx Adrspk

Condition: excellent (used), Year of construction: 2017, TOYOTA Model: SPE200DN S/N: 6553285 Condition: OPERATIONAL Hours (MTH): 3118 Year: 12-2017 The listed price is net price (excluding VAT) Fpjdpfxsy Akbwe Adrjk Weight: 955 kg Lifting capacity: 2000 kg Lift height: 2000 mm Battery capacity: 400 Ah Battery: YES (professionally refurbished, hence no battery shown in the photos) Charger: NOT INCLUDED Maximum speed: 10.0 km/h Battery weight: 195–310 kg Battery voltage: 24V Repairs: drive wheels replaced, battery refurbished, control lever set replaced. See our other items by clicking “More from this advertiser” on the right side of the listing. Feel free to contact us; price in the listing is negotiable. Telephone contact available from 8:00 to 16:00, Monday to Friday. Collection possible from 8:00 to 15:00 at our warehouse in Częstochowa, after prior telephone arrangement.

Condition: used, machine/vehicle number: MC939B03, overall weight: 5,800 kg, input voltage: 400 V, type of input current: three-phase, Vertical Machining Center. Manufacturer: Falcon Machine Tools Co., Ltd. (Chevalier, Taiwan) Model: 2040VMC Serial Number: MC939B03 Type: CNC Vertical Machining Center Machine Weight: 5,800 kg Maximum Spindle Speed: 8,000 rpm Fpodpoztba Nefx Adrok Power Supply: 400 V Required Power: 15 kVA Air Pressure Required: 5 kg/cm²

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg Fpedpfx Ajzr D Tcjdrek ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Year of construction: 2016, Description: Fodpsztx Spsfx Adrjpk The machine is in good technical condition and can be tested upon prior agreement. It includes all equipment and, if applicable, accessories (holders, tools, etc.).

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories Fjdpfx Ajvb Dcmjdrepk *

Condition: good (used), Year of construction: 2016, functionality: fully functional, Controller MAX5 DSM (2 x 19" screens) Table size 762 x 406 mm X-axis travel 660 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 10 – 12000 rpm Tool magazine 20 positions Tool holder SK40 Rapid traverse X/Y/Z 28 m/min Power 9,4/11 kW Footprint 2000 x 1800 x 2600 mm Machine weight 2850 kgs Fpedpfjy Du I Rjx Adrjk Accessories - Software options: 3D, DXF, AVG (realistic graphics), pockets/islands, ramp function, rigid tapping, cutting, tool and material database, NCPP and ISNC (macro ISO code programming), Ultimotion - MPG - Coolant water system - Chip auger - Signal light - Machine feet

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 1,300 kg, lifting height: 4,200 mm, free lift: 1,250 mm, fuel type: electric, mast type: triplex, construction height: 1,986 mm, fork length: 1,150 mm, empty load weight: 705 kg, total length: 1,760 mm, drive type: Elektro, construction width: 805 mm, High-lift pallet truck Load center: 600 Fork width: 180 mm Fork thickness: 60 mm Mast type: Triplex Technical condition: New Front tire type: Polyurethane Front tire condition: 80 - 100% Rear tire type: Polyurethane Rear tire condition: 80 - 100% Fedpfxjzt D A To Adropk Battery voltage: 100V Battery type: Lithium-ion Battery year of manufacture: 2024 Battery condition: New Initial lift, full free lift, CE certified, double-stacking capability.

Condition: used, machine/vehicle number: IC1460, Year of construction: 2009, fuel type: electric, mast type: simplex, 5246182 Fpedsztifgjpfx Adrek Serial Number: W4X133Z00473

Condition: used, machine/vehicle number: IC1458, operating hours: 4,607 h, load capacity: 2,000 kg, fuel type: electric, mast type: other, 5246414 Serial Number: W4X133B01173 Fedpfoztid Nox Adrepk battery bad

Condition: used, machine/vehicle number: IC1457, Year of construction: 2016, operating hours: 4,214 h, load capacity: 1,200 kg, lifting height: 2,510 mm, fuel type: electric, mast type: duplex, 5246413 Fpodpfxsztid As Adrsk Serial Number: W4X133G00972 Faults: T380, T390, L400, L410 Dont lift, dont drive, battery bad

Condition: used, machine/vehicle number: IC1456, Year of construction: 2007, operating hours: 10,925 h, load capacity: 2,000 kg, fuel type: electric, mast type: simplex, 5246412 Fpodpfx Adjztidvsrsk Serial Number: W4x133U00993

Condition: used, machine/vehicle number: IC1454, load capacity: 1,400 kg, lifting height: 2,841 mm, fuel type: electric, mast type: other, 5246404 Fpedeztibbjpfx Adrek Serial Number: 365H05501114 Working, battery not good

Condition: used, machine/vehicle number: IC1452, load capacity: 2,000 kg, lifting height: 1,660 mm, fuel type: electric, mast type: other, 5246416 Serial Number: 90375221 Fpsdpfjztiadex Adrjk Fault E0181

Condition: used, machine/vehicle number: IC1449, Year of construction: 2013, load capacity: 1,200 kg, lifting height: 3,410 mm, fuel type: electric, mast type: other, 5246173 Serial Number: W4X133D01058 Fpjdpfx Adjzth T Njrek No code, Battery bad

Condition: used, machine/vehicle number: IC1448, Year of construction: 1998, lifting height: 2,924 mm, fuel type: diesel, mast type: simplex, 5246171 Fpodpfjzth T Aex Adrsk Serial Number: 379J12331112 battery not good, lifts, but not holding, no charger

Condition: used, machine/vehicle number: IC1446, Year of construction: 2016, load capacity: 1,000 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: simplex, 5246168 Serial Number: F21172G03796 Fpjdpfx Adjzth Tporsk

Condition: good (used), functionality: fully functional, machine/vehicle number: 982, Year of construction: 2008, operating hours: 9,309 h, load capacity: 3,000 kg, lifting height: 3,700 mm, fuel type: electric, mast type: simplex, gearing type: automatic, battery capacity: 700 Ah, remaining battery capacity: 89 %, battery voltage: 80 V, fork carriage width: 1,350 mm, fork length: 1,200 mm, tire condition: 60 %, overall weight: 6,500 kg, Equipment: cabin, front guard, head guard, lighting, Year of manufacture: 2008 Forklift own weight: 6530 kg Load capacity: 3000 kg Operating hours: 9309 hours Telescope type: Standard Lifting height: 3700 mm Telescope height: 2375 mm Free lift: No Side shift: optional Positioner: optional Fork length: 1200 mm Fork width: 120 mm Fork thickness: 50 mm Cabin type: enclosed Tire type: Solid with rim Drive: Electric Battery: 80V/700Ah, refurbished, 89% capacity Fpedpfxoztymno Adrjk Charger: 80V/120A The forklift has been mechanically refurbished, from the electric motors to the chassis.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 1,200 kg, lifting height: 3,700 mm, free lift: 120 mm, construction height: 1,830 mm, fork length: 1,150 mm, High Lift Truck Fpsdowkk Iyjpfx Adrsk Load Center: 600 Fork Width: 180 mm Fork Thickness: 60 mm Technical Condition: New Battery Voltage: 24 V Battery Ah: 225 Ah

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours- Automatic Machining Time: 5,877 hours - Operating Time / Power On Time: 26,902 hours- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Fpedpfxjy T Hbzj Adrok Technical Specification Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2015, functionality: fully functional, Technical details x-travel 1050 mm y-travel 530 mm z-travel 630 mm Control Heidenhain TNC 620 table surface area 1150 x 560 mm tool taper SK 40 spindle turning speed range 10000 U/min rapid traverse 24 m/min total power requirement 25 kVA weight of the machine ca. 7,8 t dimensions of the machine ca. 4,3 x 2,4 x 2,9 m Additional information Working hours (date 10. July 2026): - Control on: 20811 h - Machine on: 13353 h - Programm cycle: 7412 h - Spindle hours : 5184 h Equipment: CNC control Heidenhain TNC 620 Electronic handwheel Heidenhain Tool measuring system Linear scales in all axes X/Y/Z Preparation for measuring probe 30-station tool changer Fsdpfx Adszrukforopk Coolant equipment with paper band filter system Internal coolant supply through the spindle 20 bar Blown air through the spindle Chip conveyor Machine documentation

Condition: used, Year of construction: 1997, Mikron UME 600 - Vertical Machining Center Fedpfxjzpymyo Adrepk Tool holder: SK40 X/Y/Z: 600 / 500 / 450 mm - Heidenhain TNC 407 CNC control - SARA UC1 SD3 air purifier - Coolant system - Chip conveyor - Year of manufacture: 1997 Technical data - Spindle taper: SK40 - Travel range X-axis: 600 mm - Travel range Y-axis: 500 mm - Travel range Z-axis: 450 mm - Feed rate range: 0 - 10000 mm/min - Spindle speed: 5 - 5000 rpm - Quill stroke: 90 mm - Table size: 900 × 530 mm - Spindle power: 6 kW - Total power requirement: 9 kW - Operating voltage: 400 V - Space requirement with control & extraction unit WxHxD: 3500 x 3000 x 3500 mm - Dimensions without control & extraction unit WxHxD: 2400 x 2100 x 2700 mm - Total weight: approx. 3400 kg

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 14,881 h, load capacity: 3,000 kg, lifting height: 3,200 mm, free lift: 1,400 mm, load center: 600 mm, fuel type: gas, motor manufacturer: VW, gearing type: hydrostat, fork length: 1,200 mm, tire condition: 60 %, Equipment: cabin, lighting, Load capacity: 3000 kg Operating hours: 14881 hours Mast type: Duplex Lifting height: 3200 mm Mast height: 2250 mm Free lift: Yes Side shift: optional Fork length: 1200 mm Fork width: 120 mm Fork thickness: 50 mm Cab type: Full cab with heater Tire type: Solid Engine: Gas Seat belt: Yes Suspended seat: Yes Steering handle: Yes Fpodpfsztxw Eox Adrok Horn: Yes Lights: Yes The forklift has been owned for several years and regularly serviced by our workshop. Service records can be provided. Sold as is.