Used Vhf Cam 2030 for sale (1,377)

Year of construction: 2004, condition: ready for operation (used), overall weight: 450 kg, number of axes: 3, This 3-axis VHF CAM 20230 Bed Type Milling Machine was manufactured in 2004. It features a substantial weight of 450kg, ensuring stability and robust performance for precision milling. Consider the opportunity to buy this VHF CAM 20230 Bed Type Milling Machine. Contact us for more information. Dcsdpfoyf Nlfjx Aa Njg

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0710 0572, Designation: CNC Milling Machine S2 2030 – 3x2m Manufacturer: Flexicam Model: S2 2030 First commissioning: 10.04.2008 Length: 4100 mm Width: 3020 mm Height: 2000 mm Weight: approx. 3,500 kg Leveling feet: 6 (Ø60mm) Milling table: 3x2 metres Working width X: 3080 mm, Y: 2040 mm, Z: 170 mm Control: FlexiCAM with RJ-45 network cable (crossover) for direct PC-to-machine connection Incl. Riedex extraction unit Machine can be loaded by us (not included in the price) Dodsy Eqdnspfx Aa Njcg

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots Dcsdpex E Tmbjfx Aa Njg • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: excellent (used), Year of construction: 2000, Type of machine HFE220-3L WILA TOOLING SYSTEM WITH FUL L LENGTH HYDRAULIC CLAMPING LARGE AMOUNT OF WILA TOOLING Maximum press force 2200 Minimum usable press force 260 Beam length 3220 Distance between frames 2700 Throat depth 420 Stroke length 350 Open height 620 Minimal increment 0.01 Positioning accuracy of the beam 0.01 Dsdpfsv Rw Riox Aa Nocg Beam width 180 Table height 960 Approach speed without protection 10 Approach speed with protection 100 Maximum bending speed 10 Return speed 100 Motor power 18.5 Mains rating 20 Mains voltage 400 Mains frequency 50 Hydraulic oil capacity 295 Maximum hydraulic pressure 300 Length overall +/- 10 mm 4360 Depth overall +/- 10 mm 2660 Height overall +/- 10 mm 3200 Weight approximate 15350

Condition: used, Manufacturer: CAM Model: CAM HF 77-8 Type: Continuous automatic cartoning/boxing machine Dcsdpfxjx R Dq Is Aa Nog Application: bottling (tilting screw) Previous use: pharmaceutical, packaging of syrup bottles. Refurbished by the manufacturer in 2004. A size range: 20mm to 70mm Size range B: 12mm to 70mm C format range: 50mm to 200mm ; Format range A + B max: 140mm Distribution of leaflets. Documents available with the machine. Siemens PLC

Condition: used, Manufacturer : CAM Model: AV65 Type: automatic vertical cartoner   Product insertion : manual or automatic (requires modification) Leaflet insertion : available Djdpfx Aox R Dgioa Necg Covers and safety devices Vacuum pump Single shot action module Production speed: 15 – 70 packs per minute Case formats : A – Width: 20 – 115 mm B – Length: 15 – 70 mm C – Height: 50 – 190 mm   Video: ?si=7gBIqcD_U4OJ55p3   Paper documentation available

Condition: used, Year of construction: 2008, Manufacturer : CAM Model: AP Year: 2008 Dedpfex R A Dgjx Aa Necg Type : Intermittent motion overwrapper Materials: Polipropilene, PVC, cellophane. Feeding: automatic or manual. Mechanical speed: 31 - 100 strokes / minute. Format : Length (A): 35 - 150 mm Height (B): 15 - 80 mm Width (C): 60 - 300 mm Chuck: Ø 70 - 76 mm Roll: max. Ø 320 mm Width: 100 - 400 mm  

Condition: used, functionality: fully functional, In this offer you are purchasing a mint condition resting ECG "GE CAM Connect 14" Djdpfswr Anbsx Aa Nscg Object of sale: 1 x GE CAM Connect 14 with the following features: Mobile resting ECG 12 or 15 leads Easy to integrate into MUSE and PACS systems With automatic arrhythmia detection DICOM-compatible Condition: This is a used device which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: new, functionality: fully functional, Year of construction: 2025, CAM Attachments D03/PH50T.135 Year of manufacture: 2025 Fork positioner with separate sideshift FEM fork carriage attachment class (ISO 2328): 3A Capacity at load center (Q1) (kg): 5000 Dcjdpfx Aaowgfhgo Nsg Load center (LC) (mm): 500 Mounting thickness (LL) (mm): 78 Total sideshift stroke: 100+100 Minimum opening range over the forks (W8) (mm): 410 Maximum opening range over the forks (W9) (mm): 1220 Minimum fork carriage width (W6) (mm): 1100 Maximum frame width (W4) (mm): 1350 Minimum fork width (W2) (mm): 120 Maximum fork width (W3) (mm): 150 Frame height (H7) (mm): 539 Horizontal load center (HCG) (mm): 41 Vertical load center (VCG) (mm): 273 Attachment weight (G) (kg): 160

Year of construction: 2010, condition: good (used), CAM Bundler / Stretch Bander with Heat Shrink Tubs + Tubs of Trays Automatic Side loader Infeed All stainless steel 350mm wide x 1550mm long stainless wire mesh belt Side infeed belt 230mm W x 1000mm L 110mm Pusher Stroke Current film 250mm, Max Film 500mm Complete with spare parts Pack Details Size Pot Size Collation Bundle Size D E F 125g 60 ø x 68mm 4 x 3 x 1 180 68 240 125g 60 ø x 68mm 3 x 2 x 1 120 68 180 250g 75 ø x 68mm 4 x 3 x 1 225 75 300 250g 75 ø x 68mm 3 x 2 x 1 150 75 225 125g Tray (2 x 6) N/A 120 68 368 125g Tray (4 x 3) N/A 183 68 246 250g Tray (4 x 3) N/A 234 75 310 250g Tray (2 x 3) N/A 144 75 230 Dcodsnu Uh Nspfx Aa Nsg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 PVC CAM Çıtası KESME MAKİNESİ, • Conforms to CE standards. • 45-degree cutting capability for PVC glazing bead profiles. • Automatic operating system. • 2.5-meter conveyor system for long frames. • Adjustable cutting speed. • Pneumatic profile clamping system. • Saw blade diameter Ø200 millimeters. OPTIONS Dcjdpfxeq U Tbkj Aa Neg • Left conveyor attachment capability. • Notching saw. • Connectivity for digital meter. • Capability to connect a Bluetooth measuring station.

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife Dodpfsirmgfsx Aa Njcg The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: new, Year of construction: 2026, 2030 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. Djdpfx Asin Eqfea Nocg CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist

Condition: ready for operation (used), SEW Eurodrive WPU 2030 pole-changing switch for pole-changing motors used 100 % functional Dedpoi Ec Uhsfx Aa Nocg

Condition: good (used), Year of construction: 2001, Power: 4.5 kW Drilling capacity: 30 mm End milling: 25 mm Dcjdpfsy H Ih Nox Aa Neg Motor power: 0.85/1.5; 2.2 kW

Condition: used, mileage: 22,600 km, power: 88 kW (119.65 HP), first registration: 09/2020, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: air conditioning, central locking, electronic stability program (ESP), soot filter, Fiat Ducato L1H1 with 2 sliding doors (left + right) VAT refundable: Net sale price: €18,900 First registration: 09/2020 Mileage: 22,600 km TÜV: New upon purchase 88 kW/120 HP Short wheelbase 2x sliding doors Camera Air conditioning 2x single seats with armrest Rear doors with 270° opening Bluetooth, phone connectivity, multimedia and much more... For questions: Christian Hirsch Additional equipment/special equipment see below:----Please no emails / no emails, as they can only be processed sporadically due to time constraints. Thank you for your understanding!---- Opening hours and further information: Viewing and purchase without prior appointment possible: Mon–Thu: 09:00–16:00 Fri: 09:00–13:00 Sat: 09:00–12:00 Address: Dcedpfx Asy Nhqvea Nog Tabakried 11 84076 Pfeffenhausen For inquiries: Christian Hirsch In case of questions: Christian Hirsch Please try calling multiple times as we are often in customer meetings. Special equipment: Electronic parking assist, Rear wing doors (opening angle 260/270 degrees), LED cargo area lighting, Sliding door cargo/passenger compartment left side with window, Reverse camera Further equipment: Driver's airbag, traction control (ASR), brake assist, driver assistance system: adaptive load control (LAC), driver assistance system: hill start assist, body construction: high roof panel van standard, body version: high roof, fuel tank: 90 liters, removable partition wall (without window) in cargo area, adjustable steering column (steering wheel), engine 2.3 liter - 88 kW Turbo Diesel Multijet, wheelbase 3000 mm, full-size spare wheel (including spare wheel holder), low emissions per Euro 6d-TEMP, seat upholstery: fabric, cabin: double passenger seat, cabin: driver's seat with armrest and lumbar support, engine start/stop system More offers at Equipment determined by VIN check; technical errors may occur as a result. The information provided online is non-binding. They do not represent guaranteed features. The seller is not liable for typing or data transmission errors / changes / entry errors. Errors and prior sale reserved.

Condition: used, mileage: 71,000 km, power: 96 kW (130.52 HP), first registration: 10/2020, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, Ford Transit Custom EURO 6 from 1st owner with 2 sliding doors VAT deductible Net sale price: €8,290 - First registration: 10/2020 - 96 kW / 130 HP - 71,000 km Vehicle does not start!!!!! Engine turns over but does not start, see photos for error code!!!!! - 2 sliding doors - Air conditioning - Heated seats - Camera - Cruise control - Bluetooth Opening hours and further information: Viewing and purchase without appointment possible: Mon - Thu: 9.00 to 16.00 Fri: 9.00 - 13.00 Sat: 9.00 - 12.00 Address: Tabakried 11 84076 Pfeffenhausen Germany If you have questions: Christian Hirsch. Please try several times as we are often in customer meetings. - Air conditioning - Heated seats - Bluetooth, USB, AUX, and much more - Multifunction steering wheel - Fog lights - 2 single seats with armrests - Parking assistance front & rear + camera - Sliding door For further equipment details see below: Please no emails / No emails, as we can only respond sporadically due to time constraints! Thank you for your understanding. Special equipment: • Passenger airbag • Audio system: Radio with USB and Bluetooth hands-free kit • 240 A alternator • Grab handle B-pillar • LED cargo space lighting • Front and rear parking pilot system • Seat package 10: Driver seat (4-way adjustable) - passenger single seat incl. side airbag and heated seat, fabric • Partial height trim in load/passenger compartment Dodpfx Aaoy I Hzwe Njcg • Fleece battery 80 Ah (AGM, 2 batteries) Other equipment: • Driver airbag • Standard model • Turn indicator integrated in exterior mirror • On-board computer • Electronic brakeforce distribution (EBD) • Electronic traction control • Driver assistance system: Hill start assist • Driver assistance system: Intelligent acceleration control • Driver assistance system: Emergency brake assist • Driver assistance system: Side wind assist • Lockable glove compartment • Body: High-roof panel van • Body variant: Medium high roof • Height and reach adjustable steering column/wheel • Truck registration • Facelift, Engine 2.0 l – 77 kW TDCi CAT • Wheelbase 2933 mm • Full-size spare wheel • Low emissions per Euro 6 standard • Wipers with adjustable interval control • Headlights H4, adjustable • Sliding door cargo/passenger space right • Mud flaps front and rear • Side protective strips, 8 lashing eyes • Heat-insulating, slightly tinted windows Further equipment see below. Please no emails / No emails, as we can only respond sporadically due to time constraints! Thank you for your understanding. The information provided online is non-binding and for description purposes only. It does not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors / changes / input mistakes. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 475 mm, table width: 450 mm, table length: 1,200 mm, table load: 400 kg, overall weight: 2,300 kg, We offer this used Abene Machine Ab VHF-360Ti milling machine, year of construction 2011. Serial number: 36120 Year of manufacture: 2011 Heidenhain TNC620-control Table size 1200 x 450 mm Max load 400 kg X-travel 650 mm, Y-travel 480 mm, Z-travel 475 mm Spindle BT40 Main motor 7,5 kW Weigth 2300 kg Excellent condition Dcodpjy Hgnhsfx Aa Neg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, For sale is a Vision brand digital video inspection system in good, used condition, as shown in the pictures. Technical Specifications: • Manufacturer: Vision Engineering • Model: EVO Cam II • Includes a multi-axis column stand and angle lens • With 360° angle optics (as a lens attachment) for all-around viewing of vertical objects • Optical zoom: 30x • Digital zoom: 12x • With monitor • Condition: Used, in working order Shipping costs via freight forwarder: approx. €100 International buyers are welcome! You will receive an invoice with VAT listed. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, loaded free of charge. Subject to errors in technical data and prior sale. Dcodpfxoy N Ak Ds Aa Nog

Condition: excellent (used), functionality: fully functional, Stozza Cams 250 Model 250 Sac Tool stroke: 250 mm Distance between column and toolholder: 425 mm Distance between table and end of upright: 520 mm Ram travel: 430 mm Table size: 340 x 560 mm Table travel: 350 mm Dcodpfxjy Nc N He Aa Njg Number of strokes: 16–60

Condition: excellent (used), mileage: 4,45,000 km, power: 220 kW (299.12 HP), first registration: 08/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: green, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,150 mm, loading space width: 2,500 mm, loading space height: 800 mm, Year of construction: 2015, Equipment: air conditioning, central locking, crane, electric window regulation, navigation system, = Additional options and equipment = - 2-pedal control - Alarm system - Aluminum fuel tank - Low noise emission - Air conditioning - Air suspension - Radio/CD player - Sliding roof - Toolbox - Xenon lighting = Notes = 4x2 euro 6 Wheelbase: 5.80 m Loading platform length: 7.15 m Atlas 120.2E-A 3 L 3x hydraulically extendable Remote control 5th and 6th function Dutch vehicle In good condition! = Further information = Axle configuration Front axle: Max. axle load: 7,500 kg; Suspension: leaf spring Rear axle: Max. axle load: 11,500 kg; Suspension: air suspension Weights Empty weight: 11,005 kg Payload: 6,995 kg Gross Vehicle Weight: 18,000 kg Functional CE marking: yes Condition Technical condition: very good Optical condition: very good Identification License plate: 62-BPZ-4 Further information Please contact G. Damen or W. Schischke for more information. Djdpfx Aoyvthtsa Nscg

Condition: used, Year of construction: 2008, operating hours: 628 h, 2008 | JLG 2030 Es (8m) | Used Scissor Lift | 628 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Dcedpfx Ajy Du Ikja Neg 💰 Buy Now for EUR 4000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 34 inspection points 32 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating scissorlift with full batteries , all functions work properly 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40602 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,118 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 300 mm, table load: 790 kg, overall weight: 40,000 kg, number of axes: 5, This 5-axis Bystronic Byjet L 2030 was manufactured in 2004. It features a maximum cutting speed of 30 m/min and a maximum material thickness of 200 mm. The machine has a substantial workpiece weight capacity of 4,740 kg and a load capacity on the cutting grate of 790 kg/m². If you are looking to get high-quality waterjet cutting capabilities, consider the Bystronic Byjet L 2030 machine we have for sale. Contact us for further details. • Machine Tolerance (VDI 3441): ±0.05 mm/m • Repetition Tolerance: ±0.025 mm/m • Max. Simultaneous X/Y Positioning Speed: 56 m/min • Max. Cutting Speed: 30 m/min • Max. Material Thickness (loadable): 200 mm • Max. Workpiece Weight (flat part): 4,740 kg • Cassette Size (with integrated grate): 2000 x 3000 mm • Grate Slat Load Capacity (standard): 250 kg • Machine Weight (with options/aggregates): 11,300 kg • Machine Weight (fully loaded with steel): 40,100 kg • CNC Rotary Axis: Max pipe length 1700 mm, max diameter 200 mm (with centers) / 500 mm (with custom jaws), max weight 500 kg • Drilling Axis: Max diameter 3 mm, max depth 70 mm, speed 2600 U/min • Pump Type: Bypump 50 APC • Max. Dynamic Pressure: 3800 bar • Connected Load (Total): 61 KVA • Input Voltage: 3 x 400 V, 50/60 Hz • Operating Hours: 18,118.3 hours Additional equipment • Lifting Yoke Max. Load (single cassette): 4,500 kg Dodpfx Aasy Duyte Nscg • Cooling Unit: WKL 140 S3

Condition: good (used), mileage: 1,92,017 km, power: 120 kW (163.15 HP), first registration: 04/2012, fuel type: diesel, tire size: 195.75.16C, axle configuration: 4x2, wheelbase: 4,320 mm, fuel: diesel, fuel tank capacity: 80 l, color: green, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: other, number of seats: 2, total length: 7,100 mm, total width: 1,990 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 3,500 kg, Year of construction: 2012, Equipment: ABS, USB port, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, sliding door, soot filter, traction control, trailer coupling, = Further Options and Equipment = - 100% dealer serviced - Alarm system - Armrest - Exterior mirrors with indicator light - AUX port - Outside temperature display - Cup holder - DAB radio - Tachometer - Third brake light - Driver airbag Dcsdpexfwpqjfx Aa Nsg - Height-adjustable driver’s seat - Remote central locking - Enclosed cab - Tinted glass - Rear doors - Height-adjustable steering wheel - Folding exterior mirrors - Particulate filter - Radio/CD player - Beacon light - Reversing camera - Disc brakes - Headlight height adjustment - Immobilizer - Tachograph - Partition wall = Remarks = Very well-maintained Mercedes Sprinter 516 CDI from 04/2012. Originally Dutch, delivered with 192,017 km, from the first owner, equipped with Rico sewer and pipe technology installation. The Sprinter is dealer maintained, comes with 3 remote controls, stationary air conditioning, heating, cruise control, tow bar, and radio. For further information or photos of this vehicle, you can contact us at or , also via WhatsApp! Check our full inventory at . = Further Information = General Information Number of doors: 5 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 2,148 cc Axle Configuration Tyre size: 195/75/16C Axle brand: Michelin CrossClimate Brakes: Disc brakes Front axle: Max. axle load: 1,850 kg; Steered; Left tire tread: 70%; Right tire tread: 70%; Suspension: Coil spring Rear axle: Twin tyres; Max. axle load: 3,500 kg; Left inner tire tread: 70%; Left outer tire tread: 70%; Right inner tire tread: 70%; Right outer tire tread: 70%; Suspension: Leaf spring Weights Curb weight: 4,020 kg Payload: 980 kg Gross vehicle weight: 5,000 kg Max. towing capacity: 3,000 kg (unbraked 750 kg) Condition Technical condition: good Optical condition: good Damages: none Financial Information VAT/margin: VAT deductible = Company Information = Nidro Cars Holland is located in the centre of the country and is the right address for the purchase of your car, van or truck. The indicated price is the 'internet take-away price.' For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All types of trade possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content.)

Condition: used, mileage: 31,000 km, power: 110 kW (149.56 HP), first registration: 05/2021, fuel type: diesel, overall weight: 2,800 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Volkswagen T6.1 Transporter Long Wheelbase + 2x Sliding Doors Net Sale Price: €16,790 - First Registration: 05/2021 - Mileage: 31,000 km - TÜV/Inspection: New upon purchase - Long Wheelbase / MAXI - 2x Sliding Doors - Camera 2.0 TDI, 110 kW / 150 HP For further equipment details, see below! ----If you have any questions, Christian Hirsch or our friendly staff will be happy to assist you Opening hours and further information: Viewings without appointment possible: MO - THU: 9:00 to 16:00 FRI: 9:00 to 13:00 SAT: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen Germany For inquiries: Christian Hirsch * Heated windscreen * Electric windows * Electric side mirrors * Lumbar support * Smokers package * Central locking * Hill-start assist * On-board computer * Power steering * Bluetooth * Hands-free system * Touchscreen * USB Radio: Tuner/Radio * ABS * Electronic immobilizer * ESP * Cargo area partition * Rain sensor * Start/stop system * Traction control Airbags: Front airbags Daytime running lights: Daytime running lights Parking assistance: Camera (rear) Interior colour: Black Special equipment: - Light & Sight Package - Comfort Package - Manual diesel particulate filter regeneration - Driver assistance system: Rear parking sensors + camera - Driver assistance system: Surround monitoring system (Front Assist) with City Emergency Braking - Folding remote key - No child safety lock in load/passenger compartment - High partition wall in cargo area without window - Truck registration - Multifunction display Plus - Emergency call system - Reversing camera - Sliding door load/passenger compartment left and right - Mud flaps front and rear - Upholstery: Durable seat covers - Driver's cab: Driver seat height-adjustable - Driver's cab: Lumbar support driver seat - Interior trim cargo/passenger compartment: half-height hardboard trim - Reinforced lashing rings Other features: - Passenger airbag deactivatable, driver/passenger airbags - Traction control (ASR) - Audio system Composition Audio (radio, SD card slot, MP3 playback) Dodpfxjvq Sm Ss Aa Njcg - Electrically adjustable and heated exterior mirrors - Convex exterior mirror left and right - Rubber flooring in driver’s cab - On-board tools - Driver assistance: Brake Assist (HBA) - Driver assistance: Multi-Collision Brake - Driver assistance: Crosswind Assist - Laminated safety glass windscreen - Lockable glove compartment - Tailgate without window - Interior LED lighting in load/passenger compartment - Cabin air filter: pollen filter - Body type: Panel van - Roof variant: Standard roof - Fuel tank: 70 liters - Radiator grille with chrome inserts - Adjustable steering column (steering wheel) - Engine: 2.0L - 110 kW TDI - Rear fog light - Non-smoker package - Digital radio reception (DAB+) - Wheelbase: 3400 mm - Tire repair kit - Low-emission according to Euro 6d-TEMP - Sliding door right side - Electromechanical power steering - Adjustable passenger seat in driver’s cab - 7x17 steel wheels - Engine start/stop system - Driver’s seatbelt warning system - Heat-insulating glazing - Central locking with remote and internal control - Permissible gross weight: 2.80 t Please no emails – email inquiries can only be processed occasionally due to time constraints. Thank you for your understanding! Opening hours and more information: Viewing and purchase without appointment possible: MO - THU: 9:00 to 16:00 FRI: 9:00 to 13:00 SAT: 9:00