Used Vibrating Table for sale (18,597)

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Rsdpj Adzhrjfx Airoch Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Access: 2 side doors, safety light curtain, release mechanism Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Condition: used, Year of construction: 1984, Table length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 145 Scoring saw: no Saw blade height adjustment: manual / hydraulic Saw blade swivel adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Rcedpfxe Af Hmpe Airsh Crosscut fence display: scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Dust extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 1000 kg

Condition: used, machine/vehicle number: 190667 W 10, functionality: unexamined, power: 4.5 kW (6.12 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, Schelling stationary table milling machine, type FZ-4, Milling spindle D = 30 mm, Rjdpo Af Ux Asfx Airjch Max. clamping length 140 mm, Max. height adjustment 100 mm, Motor approx. 4.5 kW, Table size 1100 x 900 mm, Table height 860 mm, Weight approx. 740 kg, Incl. Holzkraft 3-roller feed system, As inspected at the Seevetal location, Ex works, excluding transport, Subject to prior sale.

Condition: excellent (used), CATALOGUE NUMBER 7918 TECHNICAL DATA - max. disc diameter: 450mm - spindle diameter: 30mm - top pneumatic clamping - disc guard - disc guard also functions as a clamping device - pneumatic disc extension - cutting height (at a width of 250mm): 120mm - at a smaller height, the width will be larger - main motor: 6kW - diameter of dust extraction port: 120mm - table dimensions (length/width): 650x850mm - table height from the base: 1000mm - roller tables: - infeed roller table + pawl: 3180mm - outfeed roller table + pawl: 2450mm Rjdps Af I E Iefx Airoch - width of sliding roller: 360mm - operating pressure: 8 bar - overall machine dimensions (without roller tables) (length/width/height): 1300x1050x1800mm - weight: 550kg ADVANTAGES - 2 roller tables - pneumatic disc stroke - used saw, in perfect condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: new, CATALOGUE NUMBER RE041 - new machine TECHNICAL DATA - saw blade diameter ⌀250 – 350/30 mm - scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - main motor power 4 kW - scoring motor power 0.75 kW - rotational speed 4000 rpm - scoring blade rotational speed 8800 rpm - blade tilt 0 – 45° - max. cutting length 2000 mm Rjdpfx Aie Aggdzerech - cutting width with parallel fence 1250 mm - splitter ⌀350 mm - spindle flange diameter 87.5 mm - table fence adjustable to 90° – 45° angle, accuracy ±1° - max. cutting height with ⌀300 mm blade 95 mm - max. cutting height with ⌀350 mm blade 120 mm - upper dust extraction port diameter ⌀80 mm - lower dust extraction port diameter ⌀100 mm - weight 620 kg - dimensions of folded machine (length/width/height) 2255x3460x1450 mm Net price: 19900 PLN Net price: 4628 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Motor: 5.5 kW Cutting height: 9 cm Rcodpfx Aij Agrffjroh Table length: 330 cm Feed width: 100 cm Scoring unit Cutting angle and cutting height are hydraulically adjustable.

Condition: used, total length: 2,100 mm, total width: 900 mm, total height: 1,050 mm, Year of manufacture: 2015 Colour: White Weight: 250 kg - Details: - └ Description: Front-wheel drive not available - Year: 2015 - CE marking present: Yes - Serial number: KK/126675 - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1300 - Roller table length [mm]: 840 - Table width [mm]: 560 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 45 Rsdpfx Ajzrkxroirsch - └ Max. adjustable [°]: 90 - └ Cutting height at 45° [mm]: 70 - Voltage [V]: 400 - Current consumption [A]: 10 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 2100mm x 900mm x 1050mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Rondo cutting table Redpfx Aie Agvnysrjch - used - length 3.5 m - 3 cutting rollers - machine from a bakery/bakery condition - no warranty - collection from warehouse/shipping option available - price €2,100

Condition: like new (used), Year of construction: 2023, For sale is a used Format4 Kappa 450 panel saw with a cutting length of 2800 mm. The machine is used as an exhibition model in our showroom and is therefore in new condition. Technical data: - Cutting length 2800 mm - Cutting width 800 mm - Cutting height 155 mm - Max. saw blade diameter 450 mm - Electrically adjustable in height + swiveling - Dust extraction port Ø 120 mm - Motor power 7.5 kW / 10.2 HP - Year of manufacture 2023 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Rodpfx Aozv R U Usirjch Related terms: Saw, circular saw, panel saw, Format Reference: R-D1618

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 604374, functionality: fully functional, operating hours: 10 h, power: 5.5 kW (7.48 HP), cutting height (max.): 150 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, Equipment: CE marking, documentation/manual, saw blade guard, scorer, MARTIN T66 Panel Saw – Showroom Machine, Year of Manufacture 2025, for Sale Technical Data Machine Type: Panel saw with pivoting saw blade Manufacturer / Model: MARTIN T66 Motor Power: 5.5 kW (main motor) Speed: Continuously adjustable from 1,000 to 6,000 rpm Cutting height at 90° (with saw blade Ø 450 mm): max. 155 mm Cutting height at 46° (with saw blade Ø 450 mm): max. 110 mm Saw blade diameter: 250 – 450 mm (bore Ø 30 mm) Saw blade swivel range: 0° – 46° Rip fence length (cutting length): 3,000 mm Sliding table: Smooth-running, hard-anodized aluminum guide, wear-resistant, self-cleaning, with replaceable cutting edge Cast iron work table: 850×1,100 mm, work height 900 mm Cutting width: 1,350 mm Length stop: Aluminum design, continuous, with error-free fine adjustment and fold-out stop extensions for angle cuts up to 2,000 mm Cross table: Steel, galvanized, with integrated fixed positions for common woodworking angles (0°, 22.5°, 30°, 45°) Net weight: approx. 1,100 – 1,400 kg Dust extraction: Connection Ø 100 mm (on the upper guard) and Ø 120 mm (in the machine stand), minimum flow rate 21 m³/min at 800 Pa Machine Configuration & Equipment Control: Ergonomic control panel at eye level with a 7.0" touchscreen (ConnectTouch) in 16:9 format; electronically controlled cutting height and cutting angle, USB interface, operating hour counter, machine diagnostics Scoring unit: Electrically adjustable 2-axis scoring unit (motor 0.75 kW, 11,500 rpm, saw blade Ø 120 mm, bore Ø 22 mm), pneumatically retractable/extendable, with ProLock quick-change system Safety lighting: Scoring unit lighting SafeLight (optical marking of the danger zone during operation) Parallel fence: Manually adjustable via handwheel with digital display of cutting width on the screen, guide on 4 radial ball bearings, dual-purpose fence ruler (upright or flat) Tool change: ProLock quick-change system for the main saw blade Rcedpfxj Agnp Es Airjh Electricals & Safety: CE-compliant, electronic braking system, dust extraction control, motor protection, undervoltage release, 2 emergency stop buttons, lockable main switch, voltage 3~/400 V / 50 Hz New price: approx. €32,000.00

Condition: refurbished (used), Year of construction: 2017, functionality: limited functionality, WMW UNION CNC table-type boring mill, completely overhauled and modernized in 2017. The machine has been rarely used since then. It is currently disassembled and kept in storage. Cannot be inspected under power!!! Rcodpfx Ae Af U Dvoireh

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Redpoz Rvi Ejfx Airech Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling Redpfx Aj Afaugjirech

Condition: excellent (used), Year of construction: 2017, Ref: 11168 . 2017 Bobst HANDYPACK GT Semi-Automatic Carton Collecting & Packing Table For use at the delivery of a folder-gluer, collects folded and glued cartons and presents them for easy manual packing. Features: • Assists efficient carton collection and manual packing • Adjustable carton flow for handling delicate products • Flexible positioning at the folder-gluer delivery • Quick setup and changeovers • Compact, mobile design Specification: Minimum folded carton size: 80 × 50 mm Maximum folded carton size: 500 × 400 mm Solid carton board: Up to 700 g/m² Rjdpfx Ao Af Tqnsirech Corrugated board: N, F and E flute, subject to material properties Collection: Continuous carton rows or counted batches Conveyor speed: Adjustable Collection conveyor height: Adjustable Carton layer thickness: Adjustable

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,500 mm, overall weight: 1,000 kg, table length: 3,000 mm, workpiece weight (max.): 4,000 kg, borehole diameter: 28 mm, No minimum price – guaranteed sale to the highest bidder! Rjdpfx Ao Af Hdneirech TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Table plate thickness: 15 mm Workpiece weight: max. 4,000 kg Bore diameter: 28 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,500 x 1,000 mm Empty weight: 1,000 kg Number of transport packages: 1 Included accessories: 4× 3D angle brackets, 300 mm (2× left, 2× right) 6× flat stops, 150 mm 6× flat stops, 225 mm 1× protractor 2× V-blocks 1× eccentric stop 1× flat angle bracket 12× clamping screws 12× quick clamps

Condition: used, Year of construction: 1980, Spindle swivels: No Height adjustment: Handwheel Milling vice adjustment: Manual Height indicator: Scale Milling stop indicator: Scale Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000, speed indicator defective Motor power: 5 / 6 kW Motor brake: Yes Dust extraction port: 120 mm Machine length: 2500 mm Machine depth: 900 mm Weight: 800 kg Rsdpfx Aiszdzb Ierech

Condition: excellent (used), Year of construction: 2019, Table milling machine HOFMANN TFS 107, manufactured in 2019. Table milling machine with a milling fence and safety guard. Collection possible from December 15th. Earlier collection is only possible by prior arrangement. Inspection by appointment only. Dismantling, loading, and transport will be arranged. Rcedpe Adubxsfx Airsh Price on request. Contact: DS-Maschinen – Owner David Schulz.

Condition: used, Year of construction: 1983, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm z-travel 1240 mm w-axis 950 mm CNC Radial face slide diameter 700 mm turning speeds 16-1250 U/min spindle drive 30 kW table surface area 1420x2000 mm workpiece weight 12000 kg control Siemens Rcodpj Afpz Nsfx Aireh type 840 C radial face slide travel 170 mm spindle drive 42 kW turning speeds 16-1250 U/min faceplate speeds from - to 4-315 U/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-2060 • Type: Vibrating Screen • Size: 2000 x 6000 mm Rodpfxjzz R E Re Airjch • Deck size: 2-3-4 • Motor: 22 kW Bearings: Heavy duty SKF-FAG • Capacity: 180-220 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Rsdpfx Aiezqyxxsroch Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 1998, sliding table length: 3000 mm cutting width at the fence: 1000 mm cutting width at the cross cut: 3200 mm cutting depth: scoring unit: ja height adjustment sawblade: manuell / Kurbel tilting adjustment sawblade: manuell / Kurbel adjustment fence: manuell readout sawblade tilting: Digital read out sawblade height: - read out fence: Scala read out crosscut: Scala sawbladediameter: 450 mm number of speeds: 4000 U/min Rcjdpezdzbbjfx Airjh motor power: 4 kW motor brake: ja - automatisch suction connection: 80 mm und 120 mm machine length: 3000 mm machine width: 2100 mm weight: ca. 1100 kg

Condition: used, Year of construction: 1933, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,259 mm, travel distance Z-axis: 1,500 mm, table length: 1,250 mm, table width: 1,400 mm, overall weight: 10,500 kg, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm Rcodpfx Asz Aun Soiroh serial number 1933 weight of the machine ca. 10,5 t

Condition: used, Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rjdpsz I Dg Esfx Airsch 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Redpfxez Hb Nbo Airsch

Condition: excellent (used), Panel saw ALTENDORF F45 ProDrive Technical data * Manufacturer: Wilhelm Altendorf GmbH & Co. KG * Model: F45 ProDrive * Year of manufacture: 2016 * Serial number: 16 * Machine type: Panel saw with sliding table Technical parameters * Main motor power: 7.5 kW * Minimum saw blade diameter: 250 mm * Maximum saw blade diameter: 450 mm * Width of the saw blade guard slot: 13 mm Electrical data Rcodpfx Ae Aa Nt Ueiroh * Connection voltage: 400 V * Rated current: 15.5 A * Frequency: 50 Hz * Number of phases: 3 Main motor * Motor manufacturer: ATB * Motor type: AF132S/2B-11 * Motor power: 7.5 kW