Used Wash Out for sale (2,560)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0737181227, inner dimension length: 1,000 mm, inner dimension width: 1,200 mm, inner dimension height: 800 mm, type of input current: three-phase, Fully automatic design for Euro boxes with 3 m infeed table and 1 m discharge table in roller version. Internal and external cleaning. Suitable for hot/cold and lye water. Ijdpfxjw Th R No Aanstr

Condition: good (used), Hand wash basin with sink, wash basin -Stainless steel sink -Upper basin size: 390 x 285 x 120 mm -Lower basin size: 400 x 400 x 200 mm -Number: 6x pools available Itjdpfx Aob Uhm Roansr -Price: per piece -Dimensions: 700/500/H445 mm -Weight: 9.1 kg

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 202011011, total length: 600 mm, total width: 280 mm, total height: 400 mm, pressure: 120 bar, injection pressure: 120 bar, temperature: 55 °C, heating capacity: 36 kW (48.95 HP), operating pressure: 120 bar, Rotating label removal machine. Machine new.It has only been tested. Operating hours 0. High pressure, with rotating heads. Detailed machine data can be found in the appendix documents. Ijdpfxsvrd H Ho Aanstr It removes labels from the KLT with high efficiency.

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 9850, total length: 7,500 mm, overall weight: 900 kg, input voltage: 400 V, Equipment: documentation/manual, Sale of an LCT T 600 demonstration pass-through washing system from 2024 at a special price Zones of the pass-through washing system: Zone 1: Main washing zone: Length: approx. 2600 mm Pump: 7.5 kW, 60 cbm/h Tank capacity: approx. 400 l Water heated with 3 electric screw-in heaters each 10 kW Isdpfxewpq Evj Aanstr Operating washing temperature: approx. 60° C Zone 2: Rinse zone Length: approx. 2200 mm Pump: 3 kW, 33 cbm/h at 3 bar Tank capacity: approx. 350 l Water heated with 2 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 3: Hot air drying zone: This serves for all-around mechanical air blowing (from below, the sides, and above) of the water droplets located on the surface of the washed goods, which are blown off by air knives and built-in high-pressure fans. The conveyor belt is equipped with a plastic belt. The frame is made of stainless steel 1.4301, has its own drive, and is controlled via the system’s PLC control. The conveyor belt brings the washed goods out of the machine, makes a 90° curve to the left, and then conveys the goods towards the machine entrance (where the items to be washed are placed on the machine). There are 3 photoelectric sensors at different points on the conveyor belt, equipped with special holders and mutually facing reflectors on the stainless steel structure. Belt width 400 mm / height up to 400 mm (At the beginning – 1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) is a buffer zone (1-2 m long). As soon as the buffer zone is filled with returning washed goods, the machine and the conveyor belt stop automatically.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Itjdpfeww Tzijx Aanjr

Condition: used, Year of construction: 2011, operating hours: 21,763 h, functionality: fully functional, total length: 7,200 mm, total width: 2,950 mm, total height: 3,000 mm, overall weight: 12,400 kg, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 175 A, power: 105 kW (142.76 HP), A Pero V4 parts cleaning system is available. Basket dimensions X/Y/Z: 1250mm/850mm/500mm Control system: Siemens S7 Basket feeding: automatic, Operating hours: 21763h, batch counter: 54211. Itsdeu Ecfljpfx Aanor Ultrasound included. Documentation available. On-site inspection is possible. Available from November 2024. Spare parts package included

Condition: new, Year of construction: 2025, Parts cleaning machine, spray cleaning system type L122 automatically working hot water chamber washing machine with basket drive by means of gear motor, housing of the plant made of stainless steel 1.4301, Itsdpfx Aasf Dy Rwonsr - 2 pieces 3-sided arranged nozzle systems made of stainless steel with stainless steel flat spray nozzles, - 2 stainless steel wash pumps (Xylem/Lowara), - level control as dry run protection - 2 suction filters as pump protection - Oil skimmer for bath maintenance - basket diameter: 1.150 mm - useful height: 700 mm - max. loading weight: 300 kg - spray pressure: 2x 3 bar - tank volume: 270 litres - heating: electrically adjustable (RT - 60°C) - Connected load (electrical): approx. 11.5 kW - plant dimensions (WxDxH): 1.480 x 1.540 x 2.195(h) mm

Condition: used, Standpipe valve 1 1/2" for wash basin -Basin depth: 400 mm -Water level: 370 mm Isdpfxjb Tdaws Aanotr -Number: 12x available -Price: per piece -Weight: 0.5 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: contino spezial 260, total length: 10,200 mm, total width: 2,532 mm, total height: 2,487 mm, water consumption per time unit: 4 l/min, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 6 bar, temperature: 80 °C, heating capacity: 50 kW (67.98 HP), power: 75 kW (101.97 HP), waste water connection: 50 mm, water pressure: 2 bar, water connection: 25 mm, Equipment: documentation/manual, Machine description - the lids of the crates can be folded down to the side, total transport height approx. 1000 - 1050mm - the two track belts each have 2 guides on the side, one guide each from above and a cam spacing of 700mm - Feed zone with 1500mm straight length with drive, working height approx. 1000mm - Main washing zone with 2700mm length, tank 600l with heating 50kW, (20kW possible via hot water) washing temperature 55-60°C, 1 stainless steel centrifugal pump 7.5kW 1500l/min at 2bar, stable external box filter, brush cleaning takes place after the first spray cleaning with an external brush, then repeated spray cleaning, - 1800mm rinsing zone with approx. 150 - 250l/h via direct fresh water supply, the fresh water is supplied hot at at least 60°C; 500mm feed zone with top suction connection (stainless steel radial fan, DN 250 connection); 1800mm long blow-off with 2 5kW fan motors; 500mm long discharge table Washing, rinsing and drying system length 8800mm Hourly output (adjustable with LENZE frequency inverter) approx. 250-300 crates with hinged lids (cross flow) or 500 lids in longitudinal flow incl. label removal with lateral brushes (LENZE drive 0.37kW) Brush cleaning takes place after the first spray cleaning with an external brush, followed by a second spray cleaning, Ijdpfxorr Smle Aanstr Additional hot water heat exchanger in the machine, Drum filter for automatic label discharge, with this equipment the dirty water in the main flow is fed through a drum filter, the label dissolution and mash formation is significantly reduced, the washing tank capacity can be used for several shifts without changing Gravity roller conveyor for Euro pallets, internal width 840mm, very stable design made of 4mm thick stainless steel sheet, the rollers are made of galvanized steel 5000mm The machine has the following connections: - Fresh water at approx. 60-80°C 3/4", flow pressure min. 2 max. 6bar via hose connection 3/4" - Electricity: max. approx. 50kW, 400V 50 Hz - Waste water DN 50 discharge into floor drain - Hot water 1 1/4" flow and return, flow temperature min. 80°C, flow rate approx. 3-4m3/h Key advantages of our machines: - completely double-walled, sound and heat-insulated machine housing, manufactured in one piece and completely welded, low energy consumption - reliable operation, very long service life - long washing treatment and nozzle and washing system refined over the years = excellent washing results - Nozzle arms can be removed and cleaned without tools, stainless steel nozzles with large passage and optimized droplet size = good cleaning effect + insensitive to soiling - Washing tunnel designed for crate size 300x400x600mm - Use of first-class attachments, e.g. LENZE drive and frequency converter, EDUR stainless steel centrifugal pump, stainless steel ELEKTROR Esslingen blow-off motor with motor separation and SIEMENS switch cabinet components

Condition: excellent (used), Washing machine which can wash a tote bin and its lid at the same time. Excellent condition. Itjdpfx Aaov Ihgvjnsr

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Itodpsxcnxdsfx Aanor Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Year of construction: 2021, condition: excellent (used), Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph Itsdpfx Aonbdtieansr

Condition: excellent (used), Year of construction: 1990, 1 x Immersion Washer Franco/Walter Franke Profi 3000 Year of manufacture: approx. 1990 Itsdpfxowk Iuwj Aaner Crate dimensions: 520 x 330 x 210 mm (larger or smaller available) With 2 different crates. The machine can be viewed in operation.

Condition: used, Drain valve for wash basin Itjdpfxjb Tdazj Aanjr -Outer: Ø 80 mm -Inside: Ø 50 mm -Connection: Ø 47 mm -Number: 13x available -Price: per piece -Weight: 0.1 kg

Condition: ready for operation (used), functionality: fully functional, Cleaning machine with rotary basket. New version with motor-driven rotary basket. Itsdpfx Aajviwn Ejnjr

Condition: good (used), Leutenegger (Starrag) wash box Technical specifications Bath contents: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V / 230V 50 Hz Supply line: 40A Control voltage: 24 V DC Temperature max: 50 ° C Heating electric Itjdped Nlybsfx Aanjr Heating power: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3 / h Shipping costs on request More articles - new and used - can be found in our shop! International shipping costs on request

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 206348, input voltage: 36 V, 2015 RCM Tera Ijdpsw Hhw Defx Aanstr Industrial Floor Cleaning Machine • Model: TERA 1303 – 2WD • Cleaning width: 130 cm (3-disc brush system) • Drying width: 136 cm • Tank capacity: 280 L fresh water / 280 L dirty water • Power source: 36V battery system (525Ah, with automatic water filling) • Operating time: approx. 7 hours (on one charge) • Driving speed: 9 km/h (forward), 4.5 km/h (reverse) • Machine weight: approx. 1,600 kg (with battery and filled tank) • Condition: Maintained, ready for operation

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Pure water RKA-600 reverse osmosis system RO 250/75 CP213e Itsdpfx Aaewar Exjnor Newly developed glass types and sophisticated rinsing processes require a high level of process engineering expertise in water treatment. Perfectly coordinated process combinations, such as particle filtration, softening, reverse osmosis, ion exchange, ultrafiltration or electrodeionization (EDI), ensure consistently high water quality. Over and over again. Reverse osmosis - Reverse Osmosis (Reverse Osmosis System) Person with headset icon service Trade fairs & events Sheet of paper with arrow pointing down Downloads Light bulb icon Customer solutions Water treatment based on the model of nature: reverse osmosis The experts at EnviroFALK develop reverse osmosis systems, also known colloquially as reverse osmosis systems or simply RO, which are optimally adapted to the various areas of application. The desalinated water is required for industrial processes as well as for applications in hospitals, laboratories and medical technology. Graphic reverse osmosis How reverse osmosis works – RO Reverse osmosis (reverse osmosis system) is based on the effect of osmosis, which can be seen in nature, for example, in burst cherries after a summer rain. The cherry contains a concentrated solution, the cherry juice. The raindrop represents the diluted solution. The skin of the cherry now equalizes the concentrations. The solvent enters the cherry through the cherry skin, the semi-permeable membrane. The system strives to achieve a balance between the two concentrations. However, as the volume of the cherry cannot increase, the pressure rises. This pressure is the osmotic pressure. In nature, this increase in pressure causes the cherry to burst. If this effect is reversed, the result is a reverse osmosis system. Pressure is exerted on the concentrated solution in order to overcome the osmotic pressure of this solution. The solvent passes through the membrane again and all dissolved water components remain on the concentrate side. Reverse osmosis water filter (Reverse Osmosis – RO) Reverse osmosis (reverse osmosis system), also known as reverse osmosis (RO), is a membrane process that retains ions as well as particulate substances in the water. This reverses the natural process of osmosis. In reverse osmosis systems, the saline solution (e.g. softened city water) is passed under pressure through semi-permeable membranes in the form of winding elements. Only the solvent, i.e. pure water, passes through the membrane and is obtained with a very low salt content as so-called permeate. All water components are concentrated and must be discharged to the sewer with a second partial flow, the concentrate. Reverse osmosis system (RO) On a large scale, a reverse osmosis system (RO) is not operated as dead-end filtration, but as cross-flow filtration. The raw water supply is divided into a pure water – the permeate with a proportion of 75-80% and a residual salt content of approx. 2% – and a concentrate, with which all other water constituents are continuously discharged from the reverse osmosis system. Reverse osmosis is often used in ultrapure water systems for green hydrogen production. It goes without saying that EnviroFALK water treatment systems are tailored precisely to your glass washing machines, the glass to be processed and the glass throughput

Condition: used, Standpipe valve 1 1/2" for wash basin -Basin depth: 200 mm -Water level: 170 mm -Number: 14x available Ijdpob Tda Dsfx Aanotr -Price: per piece -Weight: 0.3 kg

Condition: used, Standpipe valve for wash basin -Basin depth: 250 mm -Water level: 170 mm -Diameter: 60 mm -Number: 26x available -Price: per piece -Weight: 0.3 kg Itodpfeb Uhkyex Aanjr

Condition: used, Standpipe valve 1 1/2" for wash basin -Basin depth: 300 mm -Water level: 270 mm -Number: 37x available -Price: per piece Isdeb Uhmcspfx Aanotr -Weight: 0.4 kg

Condition: used, Standpipe valve 1 1/2" for wash basin Itjdpfx Aaob Tdaxensr -Basin depth: 150 mm -Water level: 120 mm -Number: 15x available -Price: per piece -Weight: 0.3 kg

Condition: used, Standpipe valve 1 1/2" for wash basin -Basin depth: 350 mm -Water level: 320 mm Itsdeb Tdayjpfx Aaner -Number: 14x available -Price: per piece -Weight: 0.4 kg

Condition: used, Standpipe valve for wash basin -Basin depth: 350 mm -Water level: 310 mm -Diameter: 60 mm -Number: 16x available Itsdpfxeb Uhk Aj Aaner -Price: per piece -Weight: 0.3 kg

Condition: used, Standpipe valve for wash basin -Basin depth: 300 mm -Water level: 250 mm -Diameter: 60 mm -Number: 4x available -Price: per piece Itodpjb Uhkzsfx Aaner -Weight: 0.3 kg