Used Waterjet Cutting Pump for sale (22,603)

Condition: used, Year of construction: 2004, functionality: unexamined, We are offering this used Kjellberg FineFocus 600 plasma cutting machine, including a new torch and wear parts, manufactured in 2004. Hjdpjzn Hilsfx Akrjnu If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Leybold Type: Trivac D 40 B The TRIVAC B series are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These are pinned together to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air intake High leak tightness (suitable for 4He) Technical data: Product: TRIVAC D 40 B Suction side connection flange: DN 40 ISO-KF Pressure side connection flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Hjdpfozgbvqex Akrsnu Operating fluid volume min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection class: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 1995, CNC portal flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm Hnjdpfoyay Dhox Akrju 8 x oxy-fuel torches, type ALFA 8 x Omnilift 200 Without rail Without table Without filter 121026ä

Condition: used, Year of construction: 2015, CNC laser cutting machine, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting machine, - IPG fiber laser source, - HIGHYAG cutting head, and - KEMPER extraction system. Laser IPG Ytterblum Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W Cooling: IPG air-water chiller Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Hodpfx Aozhtp Eekrjnu Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Focus diameter: approx. 300 µm at 200 µm optical fiber Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Certification: IFA-tested, welding fume class W3 (high-alloy steels) Availability from 10/2026 Reference No.: C2177 121026ä

Condition: like new (used), Year of construction: 2014, operating hours: 4,036 h, functionality: fully functional, saw blade diameter: 500 mm, Paul C11 MKL Machine in excellent technical condition MAXI 6 Premium control system – supports over 15 languages Saw blade feeding mechanism with servomotor Fully optimized Hnodpfx Aksz N Dw Ierou 4036 operating hours 5 ejectors Machine ready for operation

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter Hnjdoz N Sgwopfx Akrju switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: excellent (used), Year of construction: 2008, The ATOM FlashCut 3010 plotter is an advanced digital knife cutting machine designed for precise and fast cutting of a wide range of materials, such as leather, textiles, foams, and plastics. It is particularly valued in the footwear, leather goods, and gasket/component manufacturing industries. ⸻ 📐 Technical specifications • Working area: 3000 × 1000 mm • Power consumption: 13.5 kW • External dimensions: 3765 × 1955 × 2805 mm (height) • Weight: 1320 kg ⸻ ⚙️ Main features • Versatility: The plotter enables cutting of various materials, from soft leathers to hard plastics. • Ergonomics: Compact and ergonomic design ensures easy operation and space-saving installation in production facilities. • Vacuum system: Dual-zone vacuum system ensures stable material hold-down during cutting. • Cutting head: Supports multiple tools, including oscillating knives and creasing tools, providing greater production flexibility. ⸻ 🏭 Industrial applications The ATOM FlashCut EASY 3010 plotter is used for: Hnsdpfx Asy D E R Nskrsu • Footwear and leather goods manufacturing • Gasket and technical component production • Textile and furniture industries • Packaging and advertising material production ⸻ 🛠️ Additional information The 3010 model is especially recommended for companies seeking a solution that combines high cutting precision with production efficiency. Thanks to its ability to process large-format materials and support for various cutting tools, this plotter is suitable for both serial production and custom projects.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Hjdpfx Asz Rl Eijkrenu Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking Hjdpez Rl Taofx Akrsnu - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: used, Year of manufacture: 2006 Colour: White Weight: 2.570 kg - Details: - └ Description: Includes chalk system, Liège scrap pieces; installation dimensions: 15,200 x 2,800 x 1,800 - Year: 2006 - CE marking present: Yes - Serial number: 552 - Max. saw length [mm]: 7000 - Min. saw blade diameter[mm]: 500 - Max. saw blade diameter [mm]: 550 Hsdpfx Aoz Spr Aekrjnu - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 7000 - Output table length [mm]: 6300 - Options: Automatic pusher system - Transport weight [kg]: 2570kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, mileage: 4,28,788 km, first registration: 07/2026, Year of construction: 2007, operating hours: 984 h, ASTRA HD8 84.48-80 with Sermac 28m concrete pump First registered on July 9th, 2007 – Euro 5 Mileage: 428,788 km Operating hours: 984 Equipment: Sermac 28m SCC73-4Z28 concrete pump Tires: 50-60% tread remaining Valid inspection certificate Good condition Hjdpfxoz Sq Ewe Akrenu Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, AND SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, Edwards Edwards iXH4545H – Industrial High-Vacuum/Dry Pump For sale is an Edwards iXH4545H, MK1 HV MM96 Black EMS version. This unit comes from a technical corporate environment and belongs to the high-performance iXH series from Edwards, which is used worldwide in industrial high-vacuum and coating processes. Device Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Data (iXH series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas and configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typ. 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high-vacuum/dry pump from the 4500 series. It is typically used in: PVD / CVD coating Semiconductor industry Process chambers / vacuum furnaces Research & Development Applications with high gas load Chemical/corrosive process gas environment The iXH series is known for its high reliability, robust design, and 24/7 operability. Hodpfx Aszixyfjkrenu Weight: approx. 890 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, machine/vehicle number: #14198, Rotor diameter: 800 mm Hedjz Svbwjpfx Akronu Rotor width: 1000 mm Number of rotor blades: 7 Number of stator blades: 3 Inlet cross-section: approx. 900 x 1000 mm Drive motor: 132 kW

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee. Hsdpozzyl Hjfx Akrenu

Condition: ready for operation (used), functionality: fully functional, HM-D 539 production optimization maximum disc diameter: 550 mm minimum disc diameter: 500 mm Disc saw diameter on the spindle: 30 mm Hnodpfx Aez Sx D Ujkrsu voltage: 400V power: 10 kW loading CE marking year: 2006

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Hnedpey Avqdofx Akrou Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control Hnodpfx Aksy Akpzerou • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time Hnedpfxey Avg Ee Akreu • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication Hedpfx Asz St Uzokrjnu – additional safety guards – operation tools – hardened pressure plate

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Hnedpfx Ajy Hcd Sjkrju Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Siemens Sinumerik 840D, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, Equipment: documentation/manual, Machine DURMA HD-FL 3015 III – 4 kW Year of manufacture: End of 2018 (as new) — Technical Data • Working area (X-Y-Z): 3060 × 1530 × 160 mm • Max. sheet size: 3048 × 1524 mm • Max. sheet weight: 200 kg/m² Maximum sheet thicknesses: • Mild steel: 20 mm • Stainless steel: 14 mm • Aluminium (AlMg3): 12 mm Dynamics & Precision: • Travel speed X-Y: 200 m/min • Synchronisation speed: 280 m/min • Acceleration: 20 m/s² • Positioning accuracy: ± 0.02 mm • Repeatability: ± 0.1 mm — Standard Equipment • CE-compliant version with shuttle table & light curtain safety system • Siemens SINUMERIK 840D CNC control • Precitec ProCutter cutting head F150 (auto-focus) • Automatic pallet changer system • Automatic sheet inspection (position & size) • Positioning laser diode • Automatic nozzle cleaning • Central lubrication system • Chip conveyor • User interface (power / speed / pressure) • External Metalix CAD/CAM software with autonesting Hnedeynbbqopfx Akrou • Illuminated working area • Multi-chamber extraction system • Warning beacon — Special Accessories • IPG 4000 W fiber laser source incl. chiller & compact extraction unit • Motorized chip conveyor • Linear drives for X1, X2, Y axes • Laser service kit • Automatic nozzle changer • Additional Metalix license — Special Arrangements • Roller container for slag & small parts (operator side) • Laser source, chiller & extraction system mounted above the machine • Machine frame to be manufactured by the customer

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting Hnedjru Un Hopfx Akrou • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, Year of construction: 2023, Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. Cut-to-length slitting machine SM 1250x8 lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are types of the sheet metal cut-to-length machines we produce: -Electric cut-to-length slitting machine SM 1250x4 (cutting for 3-4 strips) -Electric cut-to-length slitting machine SM 1250x8 (cutting for 6-10 strips) -Electric cut-to-length slitting machine SM 1250x12, SM 1250x20 (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special screws on the knives to do it. You can easily cut sheet metal right from the decoiler with our cut-to-length slitting machine. Cut-to-length slitting machine could be equipped with cross cutting knife. The machine has strong base to avoid deformation while cutting and lets to cut metal into 8 strips with the perfect quality. The cutting speed of the slitting machine is about 10 meters/minute. Cut-to-length slitting machine is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour. The voltage is 380V. It could be used in environment with temperature from -10 to +45 Celsius degrees. Our enterprise has started to produce this kind of cut-to-length slitting machine (slitter) since 2008 so we have great experience in doing our job and can propose great solution to your business. Hsdpfof Epzgex Akrsnu To get more information about the price of this slitting machine and the way it could be delivered to your location just contact us. We will give you all the information you may need. Dimension: 170.00Sm x 120.00Sm x 100.00Sm Weight: 250.00Kg Engine: 1.1-1.5 kW

Condition: new, Year of construction: 2026, machine/vehicle number: BN120XT-HA-X, JEWELliner "CUT" 120W model series "PremiumPlus" Cutting & Marking in very short working time. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Our engraving laser JEWELliner "CUT" is very usefull to cut precious metals and soft metals till max. thickness of 2.5mm. Thicker metals are possible, please contact us for more informations. More materials to cut or engrave like all metals, ceramic and some plastics, are possible. Applications can found in the jewellery ans also in other production areas. The machine dimension is very compact to integrade simple into a production area. Samples to cut: gold, silver, brass, carbon, aluminium Samples of material to mark: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.15mm character high) - round engraving (engraving on round or bowed surfaces) optional The main parts of JEWELliner "CUT" ( BN120XT-HA-X ) : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 280x200mm security glass - electrical automatic door opening - emergency button - 180° view area to the marking field - electrical z-axis for automatic focus positioning - configured engraving software Specification: - laser technology: fiber laser - outputpower CW: 120W - available frequency: 2.1 - 6300kHz MOPA - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – bigger or smaller possible - focus range: ca. 2 mm - min character high: 0.3 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L850 x W660 x H680 mm - weight: ca. 80kg Hedpjf Ul Uiefx Akrenu The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Pictures can be different!

Condition: good (used), Year of construction: 2004, Item: DP-18231-Pump-APV-W80-80-240 Hnsdpfx Akotk Hykjreu Brand: APV-SPX Type: W+80/80 240 Brand: APV-SPX Serial number: 3013986 Year: 2004