Used Waterjet Cutting Systems for sale (50,109)

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Ledpezlt Aysfx Apdjag This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: refurbished (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, warranty duration: 24 months, pump pressure: 4,000 bar, power: 30 kW (40.79 HP), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX pump, and TiltaJET for absolutely vertical cuts. Completely overhauled with manufacturer certification and a two-year warranty! The waterjet cutting system from the latest OMAX high-end OptiMAX series, featuring a bridge construction, represents the pinnacle of technological feasibility combined with reliability, durability, and maximum load capacity. Low-noise and low-emission operation combined with simple PC-assisted operation for precision at the touch of a button makes this series ideal for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7 operation. Features: • Closed measuring system • Digital drives • Brushless servo motors • Precision linear guides, surface-hardened • Portal (bridge) driven on both sides • Maintenance-free IntelliTRAX drive • Energy-efficient ultra-high-pressure EnduroMAX pump • Practical water level regulation as standard • Ergonomic control panel on wheels • IntelliMAX Premium control software • Highly accurate 5-axis TiltaJET kinematics Laedpfoy Umhksx Apdeg • Accuracy up to ± 0.02 mm • Software and machine components based on the latest OMAX technology With the TiltaJET swivel head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swivel head automatically compensates for the cutting angle error on the cutting edge, regardless of the selected quality and cutting speed. The configuration of the waterjet cutting system can be freely selected. The system can be expanded with extensive accessories according to your cutting requirements. Please contact us and let us know your configuration requirements. Upon request, financing via leasing is possible at very attractive conditions, e.g., up to 86 months. The machine has been completely overhauled; therefore, the images may differ from the offer. A timely delivery can be arranged with INNOMAX AG.

Condition: like new (used), Year of construction: 2023, operating hours: 1,400 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, For sale: MicroStep WaterCut 2001.30W waterjet cutting machine in perfect condition, manufactured in 2023. The machine is equipped with a BFT Ecotron 40.37 high-pressure pump – 4000 bar and 37kW – one of the top-performing and most reliable pumps on the market. Lasdpfxjy Ecr Ho Apdog Key specifications: - Working area: 2000 x 3000 mm - Cutting head: 3-axis with anti-collision sensor - Total working hours: approx. 1400 h The machine is sold as a complete, ready-to-run package, including: - 1-ton abrasive feeder (Allfi) - Automatic sludge removal system (tank cleaning system) This configuration allows you to begin production immediately without additional investment. The machine is available for immediate delivery.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Lajdpfozzrutsx Apdeg Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min Laedjxgua Aspfx Apdsg - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards Laedpferm Ilfox Apdsg With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: used, Year of construction: 2022, operating hours: 4,500 h, functionality: fully functional, repeat accuracy: 0.2 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.2 mm, workpiece weight (max.): 1,000 kg, sheet thickness aluminum (max.): 120 mm, total length: 2,000 mm, total width: 3,000 mm, product height (max.): 120 mm, Equipment: safety light barrier, BIESSE INTERMAC PRIMUS 322 – CNC WATERJET CUTTING MACHINE For sale is a Biesse Intermac Primus 322 CNC waterjet cutting machine, manufactured in 2022. The machine has only approximately 4,500 operating hours and is equipped with a BFT 37 kW high-pressure pump. The machine is fully functional, in very good and well-maintained condition, and is immediately available. Technical Data * Manufacturer: Biesse Intermac * Model: Primus 322 * Year of manufacture: 2022 * Operating hours: approx. 4,500 hours * Configuration: 3-axis * Working area: 3,210 × 2,000 mm * Z-axis travel: 250 mm Laodpfxjz Drcye Apdjg * High-pressure pump: BFT * Pump power: 37 kW * Maximum pressure: up to 4,200 bar * Max. X/Y speed: 45 m/min * Max. table load: 1,000 kg/m² * Condition: Very good / fully functional * Location: Croatia, EU * Availability: Immediately available Highlights * Year 2022 * Only approx. 4,500 operating hours * BFT 37 kW high-pressure pump * 3-axis configuration * Working area 3,210 × 2,000 mm * Very well maintained * Fully functional * Immediately available * Inspection and demonstration under power possible by appointment

Condition: new, The Jantar is the most popular model from Eckert Maschinen, known for its dynamic performance and efficiency. It is used by large industrial companies and medium-sized businesses seeking both an economical and reliable solution. The Jantar plasma cutting system can be equipped with plasma and oxy-fuel cutting systems and can be fitted with a wide range of accessories (marking, drilling, and processing of tubes and profiles). The machine's design has been optimized for maximum reliability over the years, as confirmed by hundreds of customers throughout Europe. Key features: •Attractive price for a well-equipped base model •High-dynamic and precise cutting for 2D applications, tubes, and profiles •Cutting performance from 0.5 mm to 100 mm material thickness •Extensive database with pre-defined cutting parameters •Optional extension of the working area length Technical data: Drive: Servo AC Available working widths: 1,500, 2,000, 2,500, 3,000 mm Available working length: Any length from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 100 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Repeatability: DIN-EN 28206 Electrical systems: DIN-EN 81346 Lsdpfxsf Alb Aj Apdsag Safety module: DIN-EN 13850 Working height: 740-760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Year of construction: 2020, condition: new, The Sapphire is the optimal solution for the heavy industry, handling material thicknesses up to 200 mm. It enjoys great popularity in a variety of production facilities – often those operating in three shifts – as well as in all applications where stability, efficiency, and process reliability are particularly important. Thanks to its high-quality equipment, the system is a versatile tool for the highest demands and a helpful instrument for process optimization. Having been deployed in over 400 industrial facilities worldwide, the Sapphire cutting system proves its worth every day. Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm Lodjf Ak N Ropfx Apdjag - Extraction system PFC 6 incl. extraction ducts - Delivery, assembly, and commissioning Key features • High dynamics and precision in automated 2D & 3D cutting of sheets, tubes, and profiles • Sheet metal processing up to a material thickness of 200 mm • Extensive cutting data library for ideal user-friendliness • Designed for the highest demands under the most challenging conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2,000-7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeatability: DIN-EN 28206 Height of work table: 740-760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, table length: 3,900 mm, table width: 2,400 mm, warranty duration: 24 months, power: 37 kW (50.31 HP), OMAX 55100 TiltaJET, 37 kW EnduroMAX pump and TiltaJET for perfectly perpendicular cuts Ledpferm Imnox Apdjag Factory-refurbished with manufacturer certification and a two-year warranty! The configuration of the waterjet cutting system can be freely selected. Feel free to contact us with your individual configuration requirements. Customers searching for efficient and highly precise waterjet cutting systems will find their solution within the OMAX premium line. These powerful and extremely precise machines combine operational flexibility with the highest precision in the waterjet cutting sector. The systems can be equipped with a comprehensive range of accessories tailored to your specific cutting tasks. OMAX waterjet cutting systems are revolutionizing tool and mold making as well as single-part and series production. They are also widely used in various areas of mechanical and plant engineering. Financing via leasing is available upon request under highly attractive conditions, e.g. for up to 86 months. - Accuracy up to ± 0.02 mm - Machine components and software are up to date with the latest OMAX technology With the TiltaJET swiveling cutting head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swiveling head automatically compensates for taper errors at the cut edge, regardless of the selected quality level or cutting speed. The machine is factory-refurbished; therefore, images may vary from the actual offer. Prompt delivery can be arranged with INNOMAX AG.

Condition: good (used), Year of construction: 2016, functionality: fully functional, WJS Waterjet T-Model Advanced Machine system: T-Model NCT 30 Flying Bridge, 3 x 2 m cutting table High-pressure pump: BFT Ecotron 4037, 50HP / 4000 BAR Cutting tool: WJS-Basic cutting head Lsdpfxoy Epb No Apdsag Abrasive disposal system: WJS-Standard

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 310 mm, warranty duration: 12 months, pump pressure: 2,000 bar, power: 3.7 kW (5.03 HP), OMAX ProtoMAX® – the smallest industrial-grade waterjet cutting system in the world! Its compact design, combined with its comprehensive versatility, makes the ProtoMAX® waterjet cutting system a perfect solution for applications such as the production of small batches and prototypes, as well as for educational purposes. Furthermore, the ProtoMAX® can also be used as a complement to larger waterjet cutting systems. Thanks to its small footprint, the ProtoMAX® waterjet cutting system is ideally suited for smaller spaces. Mounting the system on rollers allows for easy and straightforward relocation. ✔ 3.7 kW pump with 2,000 bar operating pressure ✔ Cutting thickness up to 25 mm for a wide range of materials ✔ Efficient and reliable pump technology with direct drive ✔ Includes laptop with pre-installed CAD/CAM software Lsdpfx Apoy Umphedeag ✔ Quiet and clean underwater cutting (< 76 dB) ✔ Protective cover with safety switch ✔ Clamping device for securing the material A timely delivery can be arranged with INNOMAX AG. This is a demonstration machine.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Lodpfx Ajzz Achspdsag Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Ljdpfx Aszw Ukcspdjag Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2017, Uncompromised performance and precision: The G3 digital cutting system is based on the most flexible, adaptable, and easily expandable machine concept on the market. Operating hours 2.700 Tools Camera Lodszu Av Uopfx Apdeag New PC - touch screen UCT KCT EOT-250 CTT1 CTT2 VCT Router 1Kw Diverse Creasing wheels Diverse perforating knives Belt replaced in 2025 Zund Cut Center updated 2026 Vacum pump replaced in 2026 In production, demo possible upon request

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, repeat accuracy: 0.05 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.05 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,150 mm, table width: 2,080 mm, pressure: 4,150 bar, positioning speed: 15,000 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, For sale is a CMS Smartline 2040 waterjet cutting machine, manufactured in 2023, in excellent condition with only 200 working hours. The machine has been very lightly used and is technically and visually in top condition. Technical specifications: Manufacturer: CMS Model: Smartline 2040 Year of manufacture: 2023 Working hours: 200 h Working area (X × Y): 4000 × 2000 mm Z-axis stroke: 250 mm Lodpfx Apsydpmgodeag Cutting head: 3-axis Pump: Easypump 30 HP (22.5 kW) Maximum pressure: 4150 bar Abrasive feeding system: 270 kg hopper CNC control: OSA Open Machine condition: Very good / like new This machine is an excellent choice for companies looking to enter waterjet cutting or expand capacity without investing in a brand-new system. The machine is supplied complete with an air compressor included in the scope of delivery.

Year of construction: 2021, condition: used, The Matho Cuttobag CB-100 is a compact, mobile cutting and extraction system for production waste such as edge trimmings and die-cut grids. It is designed as an all-in-one, stand-alone solution for production lines in the printing, label processing, packaging, and film extrusion industries. Lsdpfxezzkcpj Apdoag The Cuttobag reduces downtime and minimizes the manual effort required for waste disposal, as the material is directly shredded and collected. The CB-100 bag version has an integrated big bag with a capacity of approximately 300 liters.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Lsdpfsxgumcox Apdsag Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: excellent (used), Year of construction: 2008, For sale is a used TruLaser 3530 laser cutting machine. Technical data: - Operating hours: Beam-on 2955 h / Laser-on 15464 h - X-axis travel: 3000 mm (max. 3104) - Y-axis travel: 1500 mm (max. 1580) - Xp-axis travel: 300 mm (max. 305 mm) - Z-axis travel: 114 mm - Max. material thickness: 20 mm - Maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - Max. positioning speed, axis-parallel: 120 m/min - Simultaneous: 170 mm/min - Acceleration during positioning, X-axis: 9 m/second - Xp + Y-axis: 15 m/second - Cutting, X-axis: 4 m/second - Cutting, Xp and Y-axis: 15 m/second Standard equipment: - Enclosed machine frame with integrated laser resonator - Motion unit for optimal processing speeds - Additional high-dynamic Xp axis - Automatic pallet changer - Enclosed beam guidance - NitroLine, high-pressure cutting Ledjixl Tnopfx Apdeag - FocusLine, constant focal position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensor technology - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Positioning laser diode - Programmable cutting gas pressure - Automatic shutdown - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo-radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lenses and quick-change device - ControlLine, capacitive height control and process control - Control system Sinumerik 840D: Open control - Causes of error messages via diagnostic functions Extended machine equipment: - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price: €45,000 net Machine has been disassembled. Can be viewed after prior arrangement. If interested, please contact us.

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Lodpfx Apoxa Excedsag

Year of construction: 1994, condition: ready for operation (used), A dividing system consisting of longitudinal and cross-cut saw Anthon is available. Production capacity at 800mm/500mm: approx. 20m³/h, max. panel dimensions X/Y: 6300mm/2500mm, total system dimensions X/Y/Z: approx. 48m/16m/3m, weight: approx. 60t. 1) Saw Anthon LNB-LNB, year of manufacture: 1994, max. package height: 150mm, control: Siemens S5. 2) In-house paternoster, decks: 3, levels: 2. 3) 4x liftomat Holzma Hau series, years of manufacture: 2004, stacking positions: 4. 4) Feeding system Systraplan, year of manufacture: 1989, stacking positions: 3. 5) Cut-off saw Holzma, year of manufacture: 1996. 6) Chipper Masur LZ 800, year of manufacture: 2003. Includes critical spare parts, such as a replacement control unit. This is a system for mass production. Documentation available. An on-site inspection is possible. Expected to be available from October 2026. Lajdpfx Ajw U Ua Tspdjg

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape Ledpfxjwiatio Apdeag aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Year of construction: 2011, condition: ready for operation (used), A Trumpf laser cutting system with automatic Trumpf Liftmaster is offered. Laser power: 5000W, laser type: Trumpf TruFlow 5000 CO₂ laser, wavelength: 10.6µm, working area X/Y: 3000mm/1500mm, Z-axis travel: approx. 115mm, max. table load: approx. 900kg, max. simultaneous speed X/Y: approx. 300m/min, max. sheet thickness mild steel/stainless steel/aluminum: approx. 25mm/20mm/12mm, operating hours (as of 12.06.2025): approx. 74181h, max. sheet format LiftMaster: approx. 3000mm/1500mm, max. LiftMaster load capacity: approx. 917kg, max. LiftMaster sheet thickness range: 20mm-25mm. Including peripheral equipment and accessories. Machine dimensions X/Y/Z: approx. 11250mm/4600mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Laodpfx Apjzpyxiodjg

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. 2 head water cutting machine CMS Tecnocut Easyline 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: X-As: 2,000 mm Y-As: 4,000 mm Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive Ljdsq U Irmspfx Apdjag - Anti-collision sensors on both heads More details / official quotation on request 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Condition: like new (used), functionality: fully functional, Year of construction: 2023, workpiece length (max.): 4,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DIMENSIONS OF LOG PACKAGES Laedszwt T Aepfx Apdjg Log packages to be cut, maximum length: 4,200 mm Log packages to be cut, minimum length: 2,500 mm Log packages to be cut, maximum width: 1,200 mm Log packages to be cut, maximum height: 1,200 mm Log packages after cutting, maximum length: 4,000 mm Log packages after cutting, minimum length: 700 mm Remaining cuts (waste), maximum length: 300 mm MACHINE DETAILS MACHINE DATA Machine type: ES 121 SHK 4 m Year of manufacture: 2023 Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Saw chain, article number 10004788, length 1,900 mm Guide rail, article number 11003322, length 1,900 mm Operating manual, article number 50002270