Used Weiler Primus 2 for sale (206)

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> Dsdpfx Adevivmyjtock To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) Dodpfxjv Tyzce Adteck A digital display is available for an additional charge.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: Dcjdevtp Edopfx Adtjk >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 Djdpfxeu Aftge Adtsck >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: ready for operation (used), WEILER Condor VS 2 with new 3-axis digital readout from university (test laboratory) - New 3-axis digital readout - Guideways in "as new" condition - Centre height: 165 mm - Swing over bed: 330 mm - Distance between centres: 800 mm - Speed range: 28-2800 rpm - Automatic longitudinal / cross feeds - Spindle bore: 40 mm - Thread cutting / metric / imperial etc. Dcodpfx Asy Efqrsdtjk - Collets / quick-clamping device incl. collets - 4-jaw chuck - Röhm - Face plate - Multifix toolpost with holders - Emergency stop - Chuck guard - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight: 900 kg Subject to errors and input mistakes.

Condition: ready for operation (used), operating hours: 33,600 h, functionality: fully functional, spindle bore: 83 mm, center width: 2,000 mm, turning diameter over bed slide: 570 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens 810D, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swing diameter over bed: 570 mm Dcjdpfxoxqpgfs Adtok Swing diameter over carriage: 340 mm Centre distance: 2,000 mm Speed range, stage 1: 1–625 rpm Speed range, stage 2: 4–2,500 rpm Spindle bore: 83 mm Spindle nose: Size 8 DIN 55027 Feed range longitudinal/cross: 0–20 mm/rev Metric threads: 0.1–400 mm Inch threads: 1/4–56 TPI Tailstock quill diameter: 80 mm Taper: MK 5 MACHINE DETAILS Control: Siemens 810D Electrical data Main drive: 20/17 kW Connected load: 30 kW Dimensions (L x W x H): 4,000 x 2,300 x 1,800 mm Operating hours: 33,600 hours EQUIPMENT Rapid traverse longitudinal/cross 8-position Sauter tool turret incl. holders Mayfran chip conveyor with coolant system Movable chip guard cover 3-jaw chuck Schunk Rota S 250 Manuals Note: The viewing windows and feed selection levers have been replaced. In addition, an oil change has been performed and the oil filter replaced.

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Djdpfxew I A Uxj Adtsck Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: like new (used), Weiler Primus Dedpfx Asyy Ngtodtock Excellent condition! With accessories

Condition: used, Year of construction: 2000, machine/vehicle number: 460, This Weiler lathe, model DA 260/1000, will be auctioned online as part of our industrial auction/machine auction for the closure of the J&S GmbH Automotive Technology location – BGA – including workshop equipment, tools, storage equipment, materials, office furniture, and canteen equipment. You can find this and many other items on our platform. Dsdpfozp Dbhox Adtsck

Condition: excellent (used), turning diameter over bed 260 mm spindle passage 28 mm turning length 300 mm centre height 130 mm Dcodpfszq Hmvox Adtek turning speeds 125 - 2800 U/min total power requirement 3 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,4 x 0,6 x 1,4 m

Condition: used, Precision lathe with cycle automation for chuck and shaft work, digital drive technology (Sinamics S120) and a Siemens Sinumerik 840D sl control running WEILER's operator-oriented SL2 software. Distance between centres 2000 mm, swing over bed 570 mm, spindle bore 83 mm, main drive 20/17 kW up to 2500 rpm. Year of manufacture 2022. Dcsdpfx Adszl Ipnotek

Condition: used, Year of construction: 1982, functionality: fully functional, Weiler Condor VS2 lathe, manufactured in 1982, with a three-jaw chuck, Multifix system, and collet chuck assembly including a set of collets. The machine is in good, operational condition and can be demonstrated under power by arrangement. Djdpfx Ajzq R Ansdtock

Year of construction: 1973, condition: excellent (used), turning length 125 mm weight of the machine ca. 0,4 t Dcjdexpxqwspfx Adtek

Condition: used, Various supports for the WEILER 260. Dcodpfezmxdxjx Adtjk

Condition: used, Year of construction: 2011, turning diameter over bed 640 mm turning length 2.000 mm control 840D incl. Weiler SL1 Siemens Dcjdpfezhcfvex Adtek centre height 320 mm swing diameter over face slide 405 mm radial face slide travel 380 mm travel upper slide 130 mm bed width 380 mm turning tool - shaft cross cut 32 x 25 mm turning speed range - main spindle 0 - 2.500 min/-1 transmission ratio 2 transmission ratio 1 0 - 800 min/-1 transmission ratio 2 0 - 2.500 min/-1 power capacity - main spindel 20,5 / 17 kW max. Torque 1.400 Nm spindle head Gr. 8 DIN 55027 spindle diameter in front bearing 120 mm spindle bore 83 mm taper bore 90 metrisch power feed longitudinal 10.000 N power feed coss 9.000 N feed range 0 - 20 mm/-1 rapid traverse 10/7 | 5/3,5 m/min metric 0,1 - 400 mm inch 1/4 - 56 G/1" module mm . II dia. of quill 100 mm quill stroke 200 mm capture MK 5 total power requirement 30 kVA weight of the machine ca. 5,7 t dimensions of the machine ca. 5,0 x 3,5 x 2,0 m Lathe cycle controled WEILER - E 60 / 2000

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm Dodezdn S Hspfx Adteck bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine xH: 4,3 x 2,5 x 1,95 m Oil Country Lathe Special machine for machining long bars and pipes. For sale is an extremely robust and precise WEILER E70 x 2000 heavy-duty lathe, manufactured in Germany to the highest quality standards. The machine is ideally suited for: ·Single-part production ·Repair work ·Toolmaking ·Heavy-duty machining applications in industry The WEILER E70 impresses with its: ·High rigidity and stability ·Large spindle bore capacity ·Excellent torque performance Perfect for machining: ·Large shafts ·Flanges ·Pipes ·Heavy workpieces Tool holder: Multifix size C *

Condition: new, Year of construction: 2025, - New machine - Precision lathe with automatic cycle control, for chuck and shaft machining. Brand: WEILER | Model: E 120 x 4500 | Year of manufacture: 2025 The precision giant. A powerful and energy-efficient production lathe with optimum accessibility. The machine for heavy workpieces. Dsdpfx Adoy Hfy Astsck Maximum cost-effectiveness from turning to milling. Precise and universally applicable, it impresses with: - State-of-the-art control and drive technology - Extremely simple operation and programming - Highest accuracy - Longevity - User-friendly ergonomics TECHNICAL DATA / ACCESSORIES, EQUIPMENT: Control system: Weiler cycle control ONE 1 (Siemens) Working range: - Centre height: 600 mm - Swivel diameter over bed: 1.200 mm - Swivel diameter over cross slide: 830 mm - Centre distance: 4.500 mm Extensive, high-quality equipment. Sales within Germany include a 24-month warranty. No guarantee is given as to the completeness and accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on the equipment available on request.

Condition: good (used), Year of construction: 2007, cycle controlled lathe Machine type: Weiler E 120 x 3.000 Control: Weiler D3 Year: 2007 Power on time: ca. 41.000 h SPECIFICATIONS Max. turning length: 3.000 mm Turningdiameter: 830 mm Max. swing over bed: 1.200 mm Bettbreite 600 mm Spindle bore: 165 mm Spindelkopf DIN55027 Gr 15 Dedpfxezizd Ts Adteck Collets: Forkardt 3KS 800mm Spindle speeds: 1 - 280 / 4 - 900 rpm Transmission ratio: 2 Torque: 8.000 Nm Amount of turrets: 1 Sauter 4-Fach Kopfrevolver für 140mm Aufnahmen Tailstock Quill diameter: 140 mm quill range: 400 mm Equipment Electronical handwheel Hydraulisches Kraftspannfutter Forkardt 3KS 800mm Chip conveyor

Condition: used, Collet set, rotary tool chuck collet holder for draw-in collets Dsdszbhu Dspfx Adtjck Collet chuck, collet holder, collet system Suitable for BOLEY - LEINEN - SCHAUBLIN - WEILER Draw-in collet type: 367E K28 DIN 6341 Collet diameter: 28 mm Collet length: approx. 105 mm Collet thread: TR 28 x 1.5 mm Collet taper: 40° - Draw tube with internal thread M 28 x 1.5 mm, handwheel for manual tightening of the collet - Length of draw tube to stop collar inside the handwheel: 457 mm - Outer diameter of draw tube: Ø 31 mm over a length of 390 mm, Ø 32.5 mm over a length of 67 mm - 31 draw-in collets: Ø 1 / 2 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9.5 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 20.5 / 21 / 22 / 23 / 24 mm Total weight: approx. 10 kg Good condition

Condition: used, functionality: fully functional, Mechanic's lathe, manufactured by WEILER Spindle speeds, continuously variable Level 1: from 160 - 900 rpm Level 2: from 320 - 1800 rpm Dedjzga Npspfx Adteck Technical data: Center distance approx. 500 mm Center height above bed approx. 125 mm

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: Dodpey T Hqcjfx Adteck >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, functionality: fully functional, Technical data: Distance between centers approx.: 500 mm Center height over bed: 125 mm Djdpszd Urmsfx Adteck 16 spindle speeds Range 1: from 110 – 900 rpm Range 2: from 440 – 3600 rpm Space requirement, length x width: 1.2 x 0.6 m Estimated weight approx.: 400 kg

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 Dsdpfoy Tmkvsx Adteck >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: new, functionality: fully functional, Hand lever quick-change chuck Dodpfx Aszc I A Rjdtock Spindle speeds from 110 - 3600 rpm Multifix A head Collets

Condition: ready for operation (used), Machine type CNC turning machine Manufacturer WEILER Model UD 24 Year of manufacture Condition Used Control type CNC Control system BOSCH CC 200 Turning diameter 190 mm Turning length 190 mm Control system BOSCH CC 200 Total power consumption 12 kW Machine weight approx. 1.6 t Space requirement approx. 2 (9) x 1.5 x 1.8 m Dsdpfx Aeza Anpedtjck