Used Weiler Primus 2 Cnc for sale (193)

Condition: good (used), Year of construction: 2006, Switch-on hours (date 18. May 2026): 28.970 h Technical details Ppjdezcmccopfx Abhju turning diameter 570 mm turning length 1000 mm control WEILER D3 swing diameter over slide rest 325 mm Swing in gap 600 mm length of gap 140 mm spindle bore 83 mm spindle diameter in front bearing 120 mm face stroke 340 mm longitudinal stroke 1100 mm workpiece weight max. 1200 kg spindle turning speed - stepless 1 - 2500 rpm transmission ratio 2 rapid travel - longitudinal/face 10 / 5 m/min main drive motor (60/100 % ED) 20 / 17 kW tailstock quill diameter 80 mm tailstock quill stroke 200 mm tailstock quill taper MT 5 weight of the machine ca. 3,8 t dimensions of the machine ca. 2,95 x 1,90 x 1,82 m * Control WEILER D3 * Chip conveyor * 4-station toolholder PARAT with several inserts * 3-jaw chuck SCHUNK ROTA-S plus 315-92

Condition: good (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: CK01, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 43 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, total height: 1,700 mm, total length: 1,800 mm, total width: 1,350 mm, quill diameter: 50 mm, quill stroke: 110 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, WEILER E30x750 lathe (year of manufacture 2007) – ready for immediate use, well-maintained, fully functional (Graz) For sale is a WEILER E30x750 lathe from 2007 in very good, well-maintained, and fully functional condition. The machine has been used reliably and is ready for immediate operation. Inspection is possible by appointment in Graz – either on-site or via video call. Data: Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Condition: fully functional, ready for immediate use Location: Graz Machine operating hours: 26,492 h (The actual operating hours are significantly lower! Based on experience, it can be assumed that the spindle running time (actual turning) accounts for only about 30% to 50% of this (i.e. approximately 8,000 to 13,000 hours) Electrical connection: 400 V Inspection: on-site or via video call by arrangement Technical data: Center height: 165 mm Pedpfx Abevphv Tehopu Turning diameter over bed: 330 mm Turning diameter over cross slide: 160 mm Distance between centers: 750 mm Turning spindle Spindle head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turning spindle: 180 Nm Main drive Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: infinitely variable Feed / Rapid traverse Feed drive: three-phase AC feed drives Feed range (infinitely variable): longitudinal: 0.001–50 mm/rev (Note: additionally stated 0–20 mm/rev) cross: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (Note: additionally stated 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 TPI Tailstock / Quill Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Accuracy Acceptance accuracy: DIN 8605 Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for more information and to arrange an inspection appointment. We will gladly send you further photos and videos of the machine in operation.

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Ppodpfx Aboxmakyeheu Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe Psdpfx Abjxmaktshepu - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - EMERGENCY stop button - Operating instructions

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, capacity: 1000 x 570 mm spindle bore: 80 mm Psdpfx Abjy E Hvvohjpu multi-tool turret Siemens control steady rest 3-jaw rotary chuck, 315 mm

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Year of manufacture: 1991, Podpfx Aezg Hvvjbhepu 3-axis digital display, Maximum turning diameter: 160 mm, Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Tailstock, Collet set, Chuck, 2 tool holders.

Condition: ready for operation (used), functionality: fully functional, Distance between centers: 500 mm Center height: 160 mm Spindle bore: 36 mm Spindle speed: 56 – 2000 rpm Tailstock: MT 3 Drive power: 2.4 kW Weight: 650 kg Dimensions: 1,400 x 700 x 1,220 mm Psdpfxeypbypo Abhepu Digital readout: Optional at extra cost Accessories: Additional accessories available on request!

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1324, spindle bore: 42 mm, total length: 2,000 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, WEILER CONDOR B Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Connection: 3 kW - Rated current: 25 A - Frequency: 50 Hz - Centre distance: approx. 700 mm - Centre height over bed: 170 mm - Swing over bed: 340 mm Pedpfx Aeyiztisbhopu - Centre height over cross slide: 100 mm - Swing over cross slide: 200 mm The machine is equipped with a tailstock, a Multifix tool holder, type B, as well as a 3-jaw chuck by RÖHM, diameter: 150 mm. Additionally, it features a digital readout by ELESTA, model: VISULESTA 4, including a matching workshop drawer cabinet with suitable accessories for the machine. FCA D-73235 Weilheim Teck – loaded onto truck

Condition: used, Collets in special size – suitable for Weiler 260 and Leinen 140 – package price: EUR 250 net Ppsdpjzd Uq Nofx Abhsu

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Psdpfx Aboy D N Daehspu Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: excellent (used), Year of construction: 2002, Technical Data WEILER E90 x 6000 precision lathe with cycle automation. The machine is in very good condition, considering its age. Maintenance has been documented. The Brio milling attachment allows for milling operations such as hexagon milling and the milling of grooves. Year of manufacture: 2002 Control system: Siemens Work area: Swinging diameter over bed: 900 mm Swinging diameter over cross slide: 530 mm Bed width: 600 mm Turning length: 6000 mm Spindle and drive: Spindle bore: 128 mm Spindle diameter in the front bearing: 178 mm Speed range: 1 to 1120 min⁻¹ Main drive with 2-stage gearbox: 45 / 37 kW Tailstock: Quill diameter: 140 mm Quill stroke: 300 mm Internal taper: MK 6 Dimensions and weight Machine weight: 13,000 kg Dimensions (L x W x H): 8400 x 2600 x 2150 mm Equipment and accessories: Ppodpfx Aozagkhsbhsu Indexing device for main spindle Milling attachment Brio BF90, mount: SK50, drive power: 11 kW Turret with quick-change tool holder Heidenhain linear scale in the X-axis Chip conveyor Many tools, including tool holders, supports, steady rests, 3 x 3-jaw chucks (900 mm, 600 mm, 300 mm), drills, and other accessories – see photos.

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. 2022 (Repairs/renovations performed by WEILER service technicians): - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced Pedpfx Aozcv Egobhepu - Scraper replaced - Reference points adjusted - Test run performed

Condition: ready for operation (used), L & Z Spindle Lathe WEILER MATADOR, from a vocational school -Center height approx. 150mm -Swinging diameter over the carriage approx. 160mm -Swinging diameter over the bed approx. 300mm Pjdpfxozdzple Abhopu -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal / cross feeds -Tailstock MK3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Weiler E30 Precision Lathe Manufacturer: Weiler Ppsdpfsy Uzgbex Abhou Type: E30 Year of Manufacture: 2018 Condition: Used, operational, ready for demonstration Operating Hours: 8,500 hours Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp - 3-jaw chuck - 8-position tool turret

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Type: E40 Year of Manufacture: 2011 Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp Psdpfxey Uzc Ns Abhepu - Full chuck jaws - Half chuck jaws - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Weiler Praktikant 160 AC Precision center lathe, 3-axis digital display, Weiler with AC drive, stepless speed control, CE marking!!!!! Technical data: >> Year of construction 1995, Machine No. 3820 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: up to 3000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 1000 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m, length 1.6 m Accessories and equipment: >> 3-axis digital display Weiler >> Quick-change toolholder system with toolholders from 2 to 28 mm, in 1 mm increments >> 3-jaw chuck 160 mm, new, with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic chip guard >> Machine feet >> Splash guard >> Bed stop For safety: Electronic chip guard for the main spindle, cover for the lead and feed screw, brake motor, 2 emergency stop switches, electrical safety switch for the gearbox About the machine: Ppodpfx Abey Ulqwshou Offered is a Weiler Praktikant AC center lathe with lead screw and feed screw, year of construction 1995, in very good condition. A very nice lathe with AC drive and stepless speed control of the main spindle. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Weiler has a CE marking. The machine comes from a training workshop. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site while it is powered on and convince yourself of its condition.

Condition: ready for operation (used), L & Z Spindle Lathe, WEILER MATADOR, from a vocational school -Center height approx. 150mm -Swinging diameter over cross slide 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm Ppedpfx Abjzduyqjheu -Spindle bore approx. 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal/facing feeds -Tailstock MK3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600kg Subject to errors and omissions.

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 Pjdevadqzepfx Abhjpu - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: excellent (used), Year of construction: 1998, turning diameter 570 mm turning length 1000 mm control Siemens / Weiler D2 Ppsdey D T Uvepfx Abheu weight of the machine ca. 3,2 t dimensions of the machine ca. 3,0 x 2,0 x 1,9 m

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm face stroke 230 dia. of quill MK 4 mm Pedpfx Aboyrh Apohspu quill stroke 120 mm centre height 200 mm thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m

Condition: excellent (used), Swing over bed 410 mm Distance between centers 1'000 mm Spindle speeds 4-3'000 rpm Ppedpfxok D S Rqo Abhju Control: WEILER Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Weiler lathe Turning diameter bed: 280 mm Ppodol Ayd Ropfx Abheu Turning diameter support: 180 mm Turning length: 800 mm Spindle bore: 24 mm Speed max: 1600 RPM Diameter faceplate: 140 mm Included tools and coolant pumpe Dimensions: 156x70x133 cm LxWxH

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Ppjdozcn Akspfx Abhsu

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Podeyuyrujpfx Abhspu Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: reconditioned (used), Year of construction: 2002, SERVO CONVENTIONAL LATHE WEILER „C 30“ With 2 axes, Siemens Sinumerik 802 C control with WEILER C 1 software Podpfx Asy Txu Hjbhjpu Year of manufacture: 2002 Spindle bore: 42 mm Distance between centers: 750 mm Diameter of swing over bed: 330 mm Speed range: 1 – 4500 rpm With the following accessories: Multifix tool holder Chuck guard 3-jaw chuck RÖHM 0 160 mm 2 sets of hardened jaws Collet chuck 3 centering pins Chip tray Chip guard with lighting Coolant system 10 adjustable machine feet Operating manual THE MACHINE IS IN VERY GOOD CONDITION!!