Used Welding Smoke Extraction Systems for sale (40,069)

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Fpjdpfx Adsdqzbrsaod Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit Fpjdpfshk S Szex Adasd chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) Fpodpfshkzt Nox Adaed - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Fsdpfehk S S Esx Adaspd Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Fpsdpfxedqzcve Adajd Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: new, Year of construction: 2025, Chip extractor ASA 7703 mobile, with 180° rotatable suction unit For milling, planing and sawing chips (not suitable for dust) Fpsdpfx Ajhk S Stjdajd 180° rotatable suction unit allows suction from below or above Sturdy metal fan wheel High-quality chassis as standard for better stability and easy manoeuvring Quick release fasteners for filter and chip bag Fine filter bag double woven Dimensions and weights Chip collection volume 2 x 290 l Nominal width outside suction socket inlet 260 mm Nominal width outside suction socket outlet 3 x 120, 1 x 100 mm Length approx. 1900 mm Width/depth approx. 670 mm Height approx. 2800 mm Weight approx. 88 kg Electrical data Idle speed 2950 min¯¹ Input power 4,8 kW Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 5,98 m² Noise emission Sound pressure level max. 98.3 dB(A) Volume flow Nominal volume flow 7700 m³/h Negative pressure max. 2800 Pa Scope of delivery: Two filter bags, two chip bags. Location: ex stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Fpodjhk S Swopfx Adajd Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Fpjdpfx Adjhkzttjaed Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece Fpodpfx Adscdy Ndsaod At an absolute special price Location: From stock Bitburg

Condition: excellent (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, exhaust gas temperature (max.): 400 °C, Roof fans (suitable for smoke extraction) from stock Manufacturer: Nicotra-Gebhardt 2 units RDM 56-4550-4W-16 Air flow rate: 6,250 m³/h, 100 Pa Certified for 120 minutes at 400°C Motor power: 2.2 kW 3-230/400V-50Hz Accessories: - Flat roof base - Inlet nozzle Fpsdpexuwqgefx Adaed - Maintenance switch Original price: €3,019 Asking price: €200 each (negotiable) 1 unit RDM 56-5671-6W-21 Air flow rate: 12,000 m³/h, 100 Pa Certified for 120 minutes at 400°C Motor power: 9 kW 3-230/400V-50Hz Accessories: - Flat roof base - Inlet nozzle - Maintenance switch Original price: €4,606 Asking price: €200 (negotiable) 1 unit RDM 56-3535-4W-10 Air flow rate: 2,050 m³/h, 100 Pa Certified for 120 minutes at 400°C Motor power: 0.55 kW 3-230/400V-50Hz Accessories: - Flat roof base - Inlet nozzle - Maintenance switch Original price: €2,213 Asking price: €200 (negotiable) 1 unit RDM 56-2528-2W-11 Air flow rate: 2,850 m³/h, 100 Pa Certified for 120 minutes at 400°C Motor power: 1.1 kW 3x230/400V-50Hz Accessories: - Flat roof base - Inlet nozzle - Maintenance switch Original price: €2,023 Asking price: €200 (negotiable) The fans are in as-new condition: they were installed but never put into operation. As the intended application was not realized, the fans were removed and are now available on pallets for collection.

Condition: ready for operation (used), Merkle W 420 AC/DC TIG Insquare welding machine Welding system Technical data see picture no. 2 You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. Fpsdeu Hg Aqjpfx Adaod A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Year of construction: 2003, total height: 2,950 mm, total length: 3,300 mm, total width: 1,350 mm, Complete clean air extraction system with briquette press and piping with sliders etc. Extraction system for woodworking companies with a briquette press underneath. Extraction system ALKO Type: MOBIL-JET 250 Year of manufacture 2003 Extraction diameter 250 mm Rated output 4900 m³/h Motor output 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm With extraction control for automatic slider control. Briquette press WEIMA/ALKO Type: APC30S Year of manufacture 2007 Motor output 5.5 KW Fpodpfevr S Ncsx Adasd Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm Incl. complete piping with branches, bends, sliders. There is another item of suction pipes with fittings available that can be purchased cheaply. The system has been dismantled and packed ready for loading. See pictures for condition, or refer to the item description. Parts can also be picked up yourself. All dimensions are approximate. All information is provided to the best of our knowledge but without guarantee. Subject to prior sale. The items can be picked up yourself or shipping is at the buyer's expense. Shipping costs are a guideline and may vary depending on distance and unloading options. The stated sales price is the net final amount plus VAT. An invoice with VAT identification will be issued.

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: Fodjyap Icjpfx Adaspd - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 7024000257, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 400 V, total width: 160 mm, total length: 290 mm, total height: 260 mm, volume flow: 7,000 m³/h, suction capacity: 7,000 m³/h, negative pressure: 2,500 Pa, compressed air connection: 6 bar, power: 11 kW (14.96 HP), input frequency: 50 Hz, input current: 50 A, control cabinet width: 50 mm, control cabinet length: 60 mm, control cabinet height: 75 mm, Equipment: type plate available, Camfil LC06-211 extraction unit. - BRAND NEW UNIT, unused, never installed - NEW FILTERS, filters are unused, the machine has zero operating hours and is new in transport packaging (see photos) Unit suitable for: welding fume, cutting fume, plasma fume, cutting dust, welding dust, grinding dust, plasma cutting, laser cutting applications. Extraction motor power: 11 KW Airflow: 7000 m3/h Max. negative pressure: 2500 PA Voltage: 400V Frequency: 50Hz Weight: 1200 kg Connection/suction diameter: Ø 350 mm Equipped with: - Complete documentation - CE certification - Electrical schematics & documentation - WEG electric motor Fsdsycwg Ejpfx Adaspd Originally purchased for a Bystronic laser cutting installation, but never installed as such! For more information, viewings, or purchase, call or email!

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Fjdpou R Szyefx Adajpd - new exhibition machine -

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W @ 9400 nm / 10600 nm Fpedpjxp Iw Hofx Adasd Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Maximum Position Resolution: 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min warmup): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing, with varioSCAN): (433 x 268 x 266) mm³ Beam Offset: 72.72 mm Other Features Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (upon arrangement) or local pickup possible. Feel free to contact us by phone for further questions.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Fedpfxjxp Iybj Adaopd Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, overall weight: 45 kg, input voltage: 230 V, total width: 4,064 mm, total length: 7,366 mm, total height: 6,604 mm, filter area: 5 m², suction capacity: 180 m³/h, pressing: 36,000 Pa, power: 1.5 kW (2.04 HP), The device has seen little use and is in very good condition and fully functional. Fpedpfx Aovpgkcodasd Specifications The ClearO2 W100 is designed to complement the 8XE MIG and 8XR MIG cobot extractors from Translas. With the combination of the welding fume burners of the 8XE MIG and 8XR MIG cobot extractors and the ClearO2 W100 devices, we capture between 90% and 98% of the welding fumes at the source and filter them with an efficiency of > IFA 99.8%. The compact device is perfect for relocation in the workplace due to its low weight - only 45 kg - and its four wheels, two of which are lockable. Automatic cleaning The ClearO2 W100 device has an automatic cleaning function by reverse compressed air pulse. As soon as the negative pressure in the filter is too high, the device automatically starts cleaning the filter. A manual cleaning function can be performed by pressing a single button. The automatic start/stop function to save energy and synchronize the device with the 8XE MIG and 8XR MIG Cobot extraction units is standard on the ClearO2 units. As soon as the gun is removed from the specially designed torch holder, the machine starts working automatically. Continuous duty motor The unit's electric motor is designed to work continuously without losing power. Thanks to the automatic cleaning function and simplified motor system, the maintenance of the unit is minimal, making it durable and time-saving. With a filter area of 5 m², this is one of the most efficient units of its size with the largest filter. The filter is disposable and has an active surface with an efficiency of: IFA >99.8%. Lightweight and mobile The ClearO2 W100 units are designed to meet the needs of a single welder who needs to change his workplace. Examples of such applications include shipbuilding, wind tower construction, tank building and other similar manufacturing industries. The four wheels with two locks and the low weight - only 45 kg - allow the welder to easily move the device to the next work location. [Source: translas]

Condition: new, functionality: fully functional, borehole diameter: 28 mm, Table length 3000 mm Table width 1500 mm Table height 200 mm Drilling diameter 28 mm Material thickness approx. 24.5 - 27 mm Side panel height 200 mm Weight approx. 1,553 kg Fpedewvkgtopfx Adaed >>> ANNIVERSARY OFFER

Condition: new, Year of construction: 2025, functionality: fully functional, Table length: 2400 mm Table width: 1200 mm Table height: 200 mm Bore diameter: 28 mm Bore grid top: 100 x 100 mm Material thickness: approx. 24.5 - 27 mm Side panel height: 200 mm Working height: 850 mm Product description: Siegmund retro special offer incl. accessories: Welding table as built 25 years ago, additionally upgraded with plasma nitriding and current-generation table legs. - High-grade steel S355J2+N + plasma nitriding - Side panel bores in diagonal grid - Corners, edges and bores chamfered at 45° - Rib-reinforced construction - Includes base set of legs, height 650 mm Accessories: - 6 x Professional screw clamps, nitrided - 2 x stop and clamping brackets 175 L, nitrided - 10 x quick-release bolts without groove, double blackened - 8 x universal stops 225 L, nitrided - 2 x stop and clamping brackets 500 G, nitrided Fedpfxjwvkh De Adaepd - 1 x accessory set

Condition: ready for operation (used), functionality: fully functional, power: 6.5 kW (8.84 HP), SPÄNEX extraction unit with 5 chip bags, complete with extraction installation as shown in the photos, motor 6.5 kW, connection D=300 mm. Fpodpfx Aox Rbuwjdajd

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Fedpfexvpumex Adaspd Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well.

Condition: new, Available from stock in various versions! Suitable, for example, for machines from Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. For installation on aluminium circular saws, ideally suited for double mitre saws and automatic sawing systems. Power output 2.2 or 3.0 kW, with or without remote start feature. 160 litre removable container. 2 extraction ports. Mobile, with 2 lockable rollers. Hoses, connectors, and reducers available to suit your requirements. Fpodpfx Aowczfaodajd

Year of construction: 2025, condition: as good as new (ex-display), CNC welding and cutting system Plug & Play – ready for immediate use Fpjdjx Ux Nmepfx Adajd Almost limitless – prototypes & series production Lightning-fast setup in

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, SYNC Nucleic Acids Extraction System (S032) Covid-19 Solutions/Auto Machine The SYNC Nucleic Acids Extraction System utilizes the unique characteristic of magnetic beads bonding with nucleic acid under a specific environment to purify the target nucleic acid samples. The purification protocol includes four basic steps: sample lysis, nucleic acid binding, wash and elution. Using SYNC Nucleic Acids Extraction System, the majority of nucleic acid purification processes will be done automatically and it dramatically reduces the human error and use the lab force much more efficiently. Using with the Geneaid Magnetic Beads Virus DNA/RNA Extraction Plate Kit, viral DNA/RNA such as SARS-COV-2, HBV, HCV and HIV would be automatically purified from nasopharyngeal swabs and plasma specimens. The purified viral DNA/RNA can be directly used for subsequent qRT-PCR detection. Fodpfouvdnzsx Adajpd pecifications (Cat. # S032) Model Name: SYNC Nucleic Acids Extraction System Sample Processing: 1 - 32 samples per batch Reagent Type: Geneaid 96 well magnetic beads nucleic acid extraction plates Control Interface: 10-inch touch panel Heat Block Temperature: Room temperature to 80°C Mixing Speed: 3 adjustable speeds Mixing Depth: Adjustable, based on reagent volume Collection Efficiency: 100 copies/ml Inter-WellPurification Accuracy: CV