Used Welding Smoke Extraction Systems for sale (40,057)

Condition: good (used), MERKLE Insquare W 300 AC/DC lasapparaat met originele kabelset Primair: Spanning: 3 x 400 V Frequentie: 50 (60) Hz Cos phi: 0,95 TIG DC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire maximale stroom: 19 A TIG AC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire piekstroom: 19 A MMA-lassen: Stick-elektroden: 1,5-6 mm Open spanning: 80 V Werkspanning: 20-32,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 13,1 kVA Primaire continue stroom: 19 A Primaire piekstroom: 22 A Lasproces: 10-standenschakelaar: TIG DC Min, TIG DC Plus, TIG DC Min met startpuls, TIG AC Geluidsarm, TIG AC Blokgolf TIG AC "Gebalanceerde TIG", Elektrode Min Elektrode Plus Elektrode "Sinusgolf" Elektrode Blokgolf Keuzeschakelaar 1: 10-standenschakelaar: Stroom 1, Tijd 1, Stijg- en daaltijd, Startstroom, Eindstroom, Ontstekingspuls, Punttijd, Gasvoor- en nastroomtijd Keuzeschakelaar 2: 9-standenschakelaar: Stroom 2, Tijd 2 (voor pulsmodus), AC Balans, AC Frequentie, Hotstarttijd en -stroom, Stroominstelling, Elektrode d, Display U Instellingen: 2 draaiknoppen voor keuzeschakelaars 1 en 2 Displays: 2 LED-displays met voorloop- en hold-functie voor stroom, spanning, tijd Tijdfuncties: 4-standenschakelaar: UIT, langzame puls, snelle puls, puntlassen Ontsteking: 4-standenschakelaar: UIT, hoogfrequent, Lift-Tig Energieregeling: 4-standenschakelaar: op het systeem, hand- of voetafstandsbediening, lastoorts Bedrijfsmodus: 4-standenschakelaar: 2-takt, 4-takt, 4-takt met 2 stromen, gastest, test, programma Programmageheugen: 20 vrij toewijsbare geheugenplaatsen AC-frequentie: 50-200 Hz AC-balans: 9-91% Gasvoorstroomtijd: 0-3 s Gasnastroomtijd: 0-25 s Stroomstijgingstijd: 0-2 s Stroomdalingstijd: 0-20 s Ontstekingspuls: 0-100 ms Puntlastijd: 0,1-2,5 s Langzame pulsen: 10 ms-2,5 s Snelle pulsen: 50 Hz-5 kHz Hotstarttijd: 0-1,5 s Hotstartstroom: 10-200% Stroominstelling: 100-250% Knop: Testbeveiliging Knop: Programmaselectie LED: Netspanning AAN, Overtemperatuur, Storing, Beveiligingscircuit, Display hold, Startstroom Stijging, Stroom 1, Stroom 2, Reductie, Eindstroom Stroombron: IGBT-omvormer Ontsteking: Hoogfrequent of Lift-Tig Norm: EN 60974-1 "S" / CE Toortsaansluiting: EURO-centrale aansluiting met 5-polige stekker Toortskoeling: Watergekoeld koelsysteem 50 mm² aansluiting: Werkstukkabel Fsdpfx Aol Sm Hbsdaopd 50 mm² aansluiting: Elektrodelaskabel Netaansluiting: 4 x 4 mm², 5 m lang Gasaansluitslang: 2 m Gewicht: 130 kg (300 AC/DC) Afmetingen L x B x H: 910 x 600 x 910 mm met gasfleshouder Gasfleshouder: 10 - 20 - 50 l gasfles Financing through our bank is also possible. komplett-konzept.leasingo.de Vind meer artikelen - nieuw en gebruikt - in onze shop! Internationale verzendkosten op aanvraag!

Condition: like new (used), functionality: fully functional, Equipment: type plate available, Dust Hog Duster SG 801-100 dust extraction system in mint condition. The system was only used once for a test run; otherwise, it is unused and in excellent condition. Fodpfx Adev Iyybsaepd Power: 1.5 kW Flow rate: max. 800 m³/h Pressure: 1,940 Pa Pneumatic filter cleaning Connection diameter: 200 mm Shipping available for €120. #8095

Condition: excellent (used), Aerosol extraction and filtration Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700 m³/h pg: 1500 Pa U: 400 V F: 50 Hz I: 3.3 A tmax: 65°C Financing through our bank is also possible. komplett-konzept.leasingo.de Fpodpfx Asx Rp Eqodasd Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2018, condition: good (used), functionality: fully functional, Mobile dust extractor according to prEN 16770, Hurrican economy 8000, year 12/2018, with ducting and various dampers for connection to various machines. Fpedpfx Adjxyzavjasd

Condition: used, volume capacity / length / mm height / mm total power requirement / kW weight of the machine ca. / t Fedpowgi S Aofx Adaopd required space / m

Condition: used, functionality: fully functional, Stanley Tucker Stud Setting System TE1500 + TF21D + LM310 – Stud Welding & Joining System Manufacturer: Stanley Engineered Fastening / Tucker / Emhart System components: Control unit / Power supply: TE1500 (Part No. T028 618/400) Feeder unit: TF21D (Part No. T059 060) Stud gun: LM310 (Part No. T133 016) Made in Germany Description: Fodjx Tfypspfx Adaopd This professional Tucker stud setting system is a complete industrial joining package for fully automatic placement of: - Weld studs - Press-in studs - Fastening elements for bodywork - Structural and sheet metal joints Tucker / Stanley systems are used worldwide in automotive manufacturing because they are: - Extremely reliable - Highly precise - Durable - Perfectly integrable into robotic cells. The system consists of: 1️⃣ TE1500 Control Unit / Power Supply - Supplies the setting tool - Regulates process parameters - Input: 400 V, 50/60 Hz - Type: TE1500/3.032.55.03.0405.X - Serial No.: 14/4409830349001 2️⃣ TF21D Feeder Unit - Automatic loading & feeding of studs - Supply voltage: 24 V - Type: TF21D.00.00/5.16F8 - Serial No.: 14/4328730020002 3️⃣ LM310 Stud Setting Tool - Pneumatic/servo-assisted setting gun - Type: LM310/K.00.00 - For precise placement/pressing in/setting of studs - Spec: "Studs 5.14" (system-specific input value) - Serial No.: 13/3850680080004 Technical data (from type plates) Control Unit TE1500 - Supply voltage: 400 V - Frequency: 50/60 Hz - Type: TE1500/3.032.55.03.0405.X Feeder Unit TF21D - Supply: 24 V - Type: TF21D.00.00/5.16F8 - Automatic feed for studs / fastening elements Stud Setting Tool LM310 - Type: LM310/K.00.00 - High-precision setting module for bodywork applications Typical application areas - Automotive industry / OEM manufacturing - Robot cells (KUKA, ABB, FANUC, retrofit systems) - Structural sheet assembly - Joining technology for body components - High-volume series production

Condition: good (used), functionality: fully functional, Paint mist extraction system/suspension rail Fedox T Amyepfx Adaspd - incl. suspension rail, dimensions: approx. 10000 x 7000 mm - incl. various hanging brackets, paint trolleys, and a paint mist extraction unit - extraction unit dimensions: 3000 x 1000 mm Note: The item must be picked up bindingly between 18 and 26 February 2026 on a date to be agreed. FCA D-78087 Mönchweiler – loaded onto truck

Condition: reconditioned (used), Year of construction: 2007, operating hours: 29,000 h, Cloos welding robot system consisting of: ROMAT 350 robot with ROTROL II V4 control unit (optionally upgradable to version 2025), gas nozzle sensor, arc seam tracking, point editor, Qineo Puls 600 welding machine (600 A), wire feeder, MRW 510 evo welding torch, torch hose package, mechanical cleaning system, pressure amplifier. 1 L manipulator WPEK 25000, load capacity 2500 kg, turning radius 1500 mm, loading height 945 mm. 1 C stand with vertical slide, travel distance 1500 mm, boom length 2750 mm. Light barrier, start preselection. The system is in excellent condition and was only used for simple TIG welding tasks. Fedpew Razzofx Adaepd Overhauled and serviced prior to delivery.

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control V 6, pedestal for standing arrangement, Fodpfx Aoizwv Nedaepd Cloos welding machine Quinto II 603 ( 600 A), wire feed, welding torch, torch hose package, mech. cleaning, pressure booster 1 rotary tilt table WPK 5000, pick-up weight 500 kg, 1 start preselection, 1 control for customer-provided sliding door gas nozzle sensor, arc seam search, point editor Unit will be completely overhauled and serviced before delivery. Second station with another, same rotary tilt table possible.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Cloos welding robot Qirox QRC 350 year 2016 incl. control unit QC 6 year 2013 Fjdpfegz S Twsx Adaopd C Stand for suspended arrangement of the robot, repainting Cloos Qineo Champ 600 welding machine, wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 2 station indexing table with H frame and WPG 5000 turning devices, take-up weight per station 500 kg, face plate distance 2200 mm, turning radius approx. 500 mm. Table newly painted, all motors overhauled, Arc protection on the indexing table, 2 swing doors, 1 start preselection, 1 light barrier gas nozzle sensor, arc seam detection, point editor System is completely overhauled and serviced before delivery. Pre-acceptance possible in Burbach. If ordered at short notice, delivery still possible in 2024.

Condition: good (used), We are selling a Merkle W 300 DC TIG direct current welding machine TIG direct current range: Fpjdpfx Adju Sqqijajd Open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) Primary continuous power: 9.5 kVA primary continuous current: 13.7 A primary maximum current: 19 A Weight: 130 kg Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder

Condition: new, Table length: 2000 mm Table width: 1000 mm Table height: 200 mm Bore diameter: 28 mm Bore grid pattern: 100 x 100 mm Material thickness: approx. 24.5 - 27 mm Height of side panel: 200 mm Working height: 850 mm Weight: 850 kg Product description: Siegmund Retro Special Offer incl. accessories: Welding table as it was 25 years ago, now also with plasma nitriding and modern table legs. - High-quality steel S355J2+N with plasma nitriding - Diagonal grid bore holes in side panels - Corners, edges, and bores beveled at 45° - Rib-reinforced construction - Incl. basic foot set (working height 850 mm) Fjdjxqy Imepfx Adaepd Accessories: - 6 x Professional screw clamps, nitrided - 12 x Quick-release bolts, double blackened, without slot - 8 x Universal stop 225 L, nitrided - 2 x Clamping and stop angle 175 L, nitrided - 2 x Clamping and stop angle 500 G, nitrided - 1 x Accessories set - Eccentric stop Ø 60 with M10 thread, nitrided - Hexagon key size 6 - Brush Ø 30 with protective cap - CleanBasic 1 liter in spray bottle - Anti-spatter 1 liter in spray bottle - Torch holder, blackened

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h Fpjdpfx Adevdczajaed rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: used, Year of construction: 1990, Technical details: Fpjdpfou Nv Dpjx Adasd total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Condition: used, Year of construction: 1988, Technical details: intake capacity: 1200 m³/h aspiration hole diameter: 230 mm total power requirement: 1,1 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 1,2x0,7x2,0 m mobile compact filtering device with suction arm length = 2800mm ( suction diameter 230mm) (tube dia160mm). 3 chamber fitering system application: smoke-and dust, such as welding smoke and skome filtration test run has been proceeded succesfully Fpjdpeu Nwitjfx Adajd *

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Fsdpfx Aexg Ickjdaspd Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031

Condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Esta: Small dust extractor OM-8 -Drive: 0.37 kW Fjdsfkzbdepfx Adaopd -Extraction arm: 3400 mm -Dimensions: 500/1330/H1550 mm -Weight: 76 kg

Condition: used, Year of construction: 2010, Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor Fjdpfx Adsrzvw Toaopd -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 2190/1460/H2080 mm Fedpfx Aowrb I Hjdaopd -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: "Fumatech" MF 1100 -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm Fpsdpsqwprgofx Adajd -Weight: 84 kg

Year of construction: 2012, condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Manufacturer: Kemper, mobile welding fume extractor type 82150 -Drive: 1.5 kW -Volume flow: 1000 m3 / h -Extraction arm: O 160 mm x 4200 mm -Transport dimensions: 655/910/H1470 mm -Weight: 194 kg Fsdshmqm Iepfx Adaopd

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 1400/1995/H2100 mm Fodow Hz T Sjpfx Adaspd -Shaking motor: 0.25 kW -Funnel frame: 1400/1995/H2350 mm -Opening: Ø 500 mm / 500 x 220 mm -Individual components: see photos -Weight: 220 kg / 521 kg

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm, welding fume extraction -Handover in the actual condition as seen -Welding fume extraction: with articulated extraction arm Fpsdpfx Adslry Tgsajd -Extraction fan: Brook Crompton 0.75 kW -extraction arm: total length 3880mm -Inlet connection: Ø 170/160 mm, outlet Ø 150 mm -Number: 1x suction available -Price per piece -Transport dimension: 1900/800/H560 mm -Weight: approx. 67 kg/pc.

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction -MIG/MAG hose package: with welding fume extraction Fpodpfjt U Trmjx Adajd -Length: 4.2 m -water cooled -Transport dimensions: 600/500/H120 mm -Weight: 4.6 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction Fedpfxst U Trtj Adaopd -MIG/MAG hose package: with welding fume extraction -Length: 4.35 m -water cooled -Transport dimensions: 640/540/H120 mm -Weight: 4.8 kg