Used Welding Turning Device for sale (22,327)

Year of construction: 2017, condition: excellent (used), I sell the turning device AUTOMATICA DVPGP. Year 2017. Bedpew Am Ndofx Ahkjwp One side feeding suitable for line. Element width up to 1400mm Total length 4500mm Available immediately. Ready for work, possible to test.

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Year 1990. One side feeding suitable for line. Element width 1250 + 1250mm Total length 6500mm Available immediately. Ready for work, possible to test. With full manuals. Bsdpsktfvfjfx Ahkowp

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Bjdpfoyqr Sxjx Ahkjwp

Condition: good (used), BILZ Size 3 Radius Lathe Turning Diameter 150 - 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Bsdov Sag Nspfx Ahkjwp

Condition: used, MIG / MAG Pulse Inverter Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Item No.: 4.075 Serial No. Year of manufacture: approx. 2000 Output: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Infinitely adjustable output range Open-circuit voltage: approx. 50 volts / approx. 30 volts Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and current - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (program and manual operation) 2-stroke, 4-stroke, 4-stroke special and spot welding - Separate 4-roller wire feed unit FRONIUS Type VR 152 with approx. 1.5 m connection hose package - 4 meter hose package NEW, with FRONIUS central connection - external Fronius water cooling unit Type FK 71 - Welding gas pressure reducer NEW - Equipped with 1.2 mm welding wire Required space (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Bwsdpfx Aeyxy Tbehksp Also suitable for TIG and electrode welding. Accessories for TIG and stick electrode welding are not included in the scope of delivery.

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Bedsc Ux Tmopfx Ahkswp Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) Bwjdpfxsc Ux Tle Ahkjp To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 5500

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Bwedpfx Ajd Siydehkjp Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Year of construction: 2026, condition: new, functionality: fully functional, AVANTECHNO 411 is a professional mobile system for line boring and internal build-up welding, designed for precision restoration of worn cylindrical bores and pivots directly on site. The system integrates boring, internal welding (overlaying), facing, drilling, and thread cutting into a single portable unit. The equipment is mounted directly onto the workpiece, allowing on-site repair without the need for disassembly or transportation of heavy components. The coaxial centering system ensures high concentricity when restoring spaced bores. Technical specifications: - Boring diameter range: Ø 22 – 400 mm (up to 1,000 mm with additional kits) - Internal build-up welding range: Ø 25 – 400 mm - External build-up welding range: Ø 20 – 250 mm - Accuracy: up to 0.01 mm (H7 tolerance field) - Feed rate: 0 – 0.5 mm/rev - Maximum spindle speed: up to 450 rpm - Continuous feed travel: 250 mm (extendable via bar length) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 3 kW - Operating temperature range: −30°C to +40°C - Weight of electromechanical module: approximately 42 kg Functional capabilities: - Single-pass coaxial restoration of multiple aligned bores - Internal hole welding with continuous spiral overlay technology - Facing of flanges and mounting surfaces - Restoration of bearing seats and circlip ring grooves - Restoration of blind bores - Quick change of boring bar with welding shaft without the need for re-centering Applications: Suitable for maintenance and repair of: - Excavators, loaders, and construction equipment - Mining machinery and processing equipment - Agricultural machinery Bwedpfxoyq Rlde Ahkop - Cranes and lifting equipment - Industrial and heavy mechanical assemblies Advantages: - On-site repair without disassembly - Significant reduction of downtime and transport costs - Compact and portable design - Manufactured in the EU with a 24-month warranty - Engineered for heavy-duty industrial applications

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: DC, input voltage: 220 V, overall weight: 50 kg, warranty duration: 24 months, AVANTECHNO 611 is a heavy-duty mobile line boring and internal welding system, designed for precise on-site restoration of worn cylindrical bores and pivot joints. Bwodpfxjyq Rivj Ahkep The machine combines boring, internal welding, facing, drilling, and thread cutting in a single portable unit. It mounts directly onto the workpiece, allowing repairs without dismantling heavy components, while maintaining precise coaxial alignment of multiple bores. Technical specifications: - Boring diameter range: Ø 62 – 600 mm (Ø 32 – 1,000 mm with additional kits) - Internal welding range: Ø 350 – 1,000 mm - Accuracy: up to 0.01 mm (H7 tolerance) - Feed rate: 0 – 0.5 mm/rev - Maximum bar rotation speed: up to 300 rpm - Continuous feed travel: 300 mm (extendable) - Drive type: DC motor with permanent magnets - Power supply: 220 V / 50 Hz - Maximum power consumption: 2.5 kW - Weight of electromechanical unit: approximately 50 kg Applications Suitable for repairing: - Excavators and construction machinery - Mining and industrial equipment - Agricultural machinery - Cranes and lifting equipment - Heavy-duty mechanical assemblies Advantages: - On-site repair without disassembly - Reduced downtime and transport costs - Portable and robust construction - Manufactured in the EU with a 24-month warranty - Designed for heavy industrial applications

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2147, Offer 23353 Hydraulic Welding Turntable and Tilting Table – Three Axes – Welding Manipulator Technical Data: - Max. load capacity: 750 kg - Face plate diameter: 700 mm - Min. table height (horizontal position): approx. 750 mm - Max. table height (horizontal position): approx. 1390 mm - Working height manually adjustable in 3 steps - Face plate motorized, rotatable and tiltable - Rotational movement electrically infinitely variable: approx. 0.01 – 2.0 rpm - Right– and left–hand rotation Bwjdpfey Hq Uljx Ahkep - Welding current transmission: approx. 700 A - Drive: 400 V - Connected load: 1.5 kW - Handheld remote control for rotation direction, swiveling and tilting - Electrical foot switch - Space requirement: approx. W 1500 x H 750 x D 900 mm - Weight: approx. 700 kg

Condition: used, machine/vehicle number: 007999, Max. panel width: 1200 mm Max. panel length: 2600 mm Rotation system: double cone Bwsdpfjw Idaisx Ahkop Rotation direction: from transverse to long

Condition: used, WIG welding machine, electric welding unit KESTRA, type WIG 350 AC/DC Electric welding machine Bwodpfx Aedzql Sehksp Manufacturer's No. / Year of manufacture approx. 1985 Power output 350 Amps = 60% duty cycle Setting range: 3 stages and fine adjustment Welding current: AC / DC Mains connection: 400 Volts, 50 Hz, 32 Amp plug - 4 meter hose pack with WIG torch - 2-cycle / 4-cycle welding unit - Water-cooled - Gas pressure regulator Space requirement L x W x H: 1050 x 560 x 900 mm Weight: 250 kg The welding test yields good results when welding stainless steel with direct current and good results when welding aluminum with alternating current. The HF ignition does not function; the arc can be ignited by briefly making contact.

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Bwsdodzqa Hopfx Ahkop Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz Bjdpodzqacofx Ahkewp - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Bedpfxsd N E Rvj Ahkewp Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Bodpfx Aspy Uzyshkewp Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Bwodpjxxmf Iofx Ahksp Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz Bodpfsxf Uw Ssx Ahkewp - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Welding power: max. 300 A -Welding cable with: electrode clamp -Ground cable -Number: 1x welding machines available -Price: per piece -Dimensions: 600/1230/H930 mm -Weight: 294 kg Bjdpfx Ahed I Szqjkswp

Condition: used, Welding device, welding device Bwsdpscti Aijfx Ahksp -Transfer in current condition as seen -pneumatic: exciting -Dimensions: 210/170/H370 mm -Weight: 11.3 kg

Year of construction: 1974, condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system Bodpfxsd Spi De Ahkewp -Roll diameter: O 160 mm -Electronic drive: adjustable -Manufacturer: APS Typ -Load capacity: max approx. 3000 kg -Speed: min. 80 mm / min -Speed: max. 2000 mm / min -Foot switch -Admission of pipes to be welded min .: O 250 mm -Acceptance of pipes to be welded max .: O 2000 mm -Laterally adjustable castors: 400 mm - 805 mm -Counter bearing length adjustable on: Rail system -Transport dimensions: 2070/2000 / H1110 mm -Own weight: 1219 kg

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, power sources Bodpsd Ih Daefx Ahkswp -Three-phase rectifiers for: MMA DC welding -Welding power: max. 350 A -Welding cable with: electrode clamp -Ground cable -Number: 2x welding machines available -Price: per piece -Dimensions: 500/620/H835 mm -Weight: 126 kg

Condition: used, Container turning device, welding turning device, roller block, rotators, pipe straightening system, roller block turning device -Roller block: container turning device, without drive -Roll spacing: 290 to 1205 mm Bwsdou Tlg Sepfx Ahkjp -Rollers: 4 pieces on both sides Ø 230 mm, total width 282 mm -Load capacity: kg -Dimensions: 940/640/H835 mm -Weight: 445 kg

Condition: good (used), Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm Bwsdpfx Ajcvpuashkop -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V -Dimensions: 1000/550/H1200 mm -Weight: 120 kg