Wenzel LH108 with Laser LC15 and Tp20

Wenzel LH 108

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 199102, WENZEL LH 108 CNC Coordinate Measuring Machine Manufacturer: WENZEL Type: LH 108 Design: CNC 3D coordinate measuring machine (bridge design) For sale is a precise and powerful WENZEL LH 108 coordinate measuring machine. This machine is ideally suited for quality assurance, production metrology, and demanding measuring tasks in tool and mold making. The LH 108 impresses with its stable granite construction, air-bearing axes, and high measuring accuracy. Thanks to CNC control, both single and series measurements can be carried out efficiently. Technical Data Measuring range: approx. X 1000 / Y 1600 / Z 800 mm Max. workpiece weight: up to approx. 2000 kg High measuring accuracy in the µm range Equipment Air bearings in all axes Ledpfx Aqjy Tnyfovohg Granite guides for maximum stability Modern CNC control with joystick operation Various probe systems (depending on the model) Temperature compensation (model-dependent) Application areas Quality assurance and incoming goods inspection Series and single-part measurement Freeform surfaces and complex components Reverse engineering Other Machine in used condition. Inspection possible by arrangement.

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Completely refurbished 2018 with new Pantec Eagle Pro Controller Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Lsdpfx Aqjdpak Revohg Option : Laserscanner (e.g. Kreon) Probe changer

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 800 mm, Measuring Range X Axis: 1,000 mm Y Axis: 3,000 mm Z Axis: 800 mm Granite Guides Air-bearing Axes Measuring Accuracy Linear measurement deviation approx. 1.3 µm plus L/400 depending on configuration and calibration status Probing Systems Renishaw probe heads possible Touch trigger and scanning PH10, TP20, SP25, SP80 depending on equipment Workpiece Weight Permissible table load up to approx. 2,000 kg depending on configuration Control CNC control with handheld operating unit Lodpjy Ewgxefx Aqvohg Software Metrosoft CM version 3.112 WENZEL Quartis R16 Electrical Supply 230 V 50/60 Hz Power consumption approx. 1 kVA Pneumatic Supply Compressed air 6 to 10 bar filtered and dry

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 Lhjdpfx Ajt Hw Nysqvog total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Max sheet width: 1600mm Lsdpfxohrnbks Aqvshg Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Ljdpfeifn N Nox Aqvehg Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head Froehling Froehling is a renowned brand recognized for reliability and robustness in the field of rolling mills. 4Hi rolling mill head with bending and coilers. Specifications: Manufacturer: FROEHLING (Germany) – Refurbished 2004 Processable material: Aluminum alloys – brass – copper – low carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 - 2mm Coil size: ID 400mm – OD 1500mm Max. rolling speed: 400m/min Lhedpfx Aog Ryqksqvjg Work rolls: Diameter 130mm – Table 340mm Back-up rolls: Diameter 390mm – Table 335mm Complete with: Uncoiler and recoiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, dismantled and loaded on truck. Ready for inspection by any interested buyer. For any questions, do not hesitate to contact us. PLEASE SUBMIT YOUR OFFER IF INTERESTED, WE WILL SURELY REACH AN AGREEMENT TOGETHER.

Condition: good (used), Year of construction: 2003, Good condition,live tools, measuring arm. Ledpfx Aswybg Ssqvshg Parts shown by hand not come. Technical details shown on pictures.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: type plate available, Fast precision coordinate measuring machine and gear measuring center. Moving gantry with patented TRICISION™ technology Lhsdov S Dk Ejpfx Aqveg X 900 / Y 1500 / Z 700 B5 control system (retrofit 2021) High-resolution Leitz LSP-S2 3D measuring head Measurement uncertainty according to DIN EN ISO 10360-2: 0.9 + L/350 µm 8-position probe change system Large package with probe accessories PCDMIS CAD++ 2024 software 12-month warranty Computer, 32" screen Installation, commissioning, and acceptance according to DIN EN ISO 10360-2, 4, and 5

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Ljdpfxjd N H A Ne Aqvshg Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition