Used Wet Cutting Machine for sale (66,463)

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Bledohv U Swopfx Ak Hog Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 4000*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Year of construction: 2012, The Prima Power Platino FIBER is in good condition, one owner, always serviced on time by Prima Power service representatives. For sale complete with storage. All documentation, service reports are included. Recently serviced with a full annual service. Laser cutting machine is connected, available for inspection, testing, in Ukmergė. Specification: Model. Serial No.: 776 E 308 Bedpfx Aeqi D Sqek Holg Year of manufacture: 2012 Made in: Italia Power: Working area (X x Y): Weight: Laser working hours: 61484 Cuts up to: 5 mm Location: Ukmergė Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2017, Plasma cutting machine from 2017, little used, made in Turkey. Fully operational. Currently selected. Technical Parameters Table surface: 2 500x 12000 mm Plasma generator: AJAN PP 260 (Precision Plasma 260 A ) Machine bridges: 1 PCS Plasma burner: Ajan (1 pc.): Gas burner: AJAN (1 pc.) + with optical ignition CNC systems: CNC control, Linux Standart equipment Ventilated width of the work table: 2500 mm Ventilated length of the work table: 12000 mm Bedperf S Tbofx Ak Holg Maximum size of the sheet: 2500 x 12000 mm Quantity of bridges: 1 unit. Plasma system: PP 260 Ajan Current: 30A, 80A, 130A, 260A Cutting Ability (low-carbon steel): 32 mm Cutting Capacity (stainless metals): 20 mm Maximum piercing of holes: 40 mm Max. Cutting ability (cut from edge): 100 mm Max. Cutting capacity of the gas head: 150 mm Maximum cutting speed (theoretical): ~ Almm/min (actual speed depends on the material, brand and thickness of the piece) Positioning max: 15 m/min Re- positioning max: +/-0.01 mm Taper angle in accordance with ISO 9013 standard "range 3′ Gases for cutting: 02, N2, F5, H35 Protection: compressed air Ventilation of the table: mechanical valve Filtering: JET filter AJF Functions - a bridge controlled by two 2-way servomotors of the AC type - automatic ignition of the gas burner - automatic gas control (for plasma and gas cutting) - automatic burner height control (plasma) THC - the function of "ohmic control" - function "ARC control" - function "Microjoint" - function marking with a plasma head Control - programmable possibilities with DIN/ISO codes - Ability to work with DXF, ESSI, and NC toolpath files - Ventilator and generator for remote start and remote control with CNC - AJAN-CAD - AJAN-i own control - AJANCAM V 7.0 - AJAN-i own software The start package Include: 20 electrodes, 20 nozzles, 20 nozzle covers, 2 gas rings, 2 nozzle rings and coolant required to start the machine. AJAN-i CNC LINUX NEW from 2017! AJAN CNC based on the LINUX operating system "Allinclusive" Control Panel - Free AJAN-CAD V 7.0 - Free software updates - Geometric Shape Catalog Automatic restart if stopped (power) - Possibility of programming DIN / ISO G codes - Ability to work in DXF, ESSI trajectories and NC files - Wide selection, tuning and recording of the program - Automatic selection of material and parameters (customize) AJANCAM v 7.0 AJANCamv7.0 was developed by its own software configuration, which has the following features: - Easy to use, fast and efficient - Automatic errors, provisioning - Ability to write a text - its own directory (libary) - Automatic or manual placement - Cutting sequential modelling - According to the automatic layout of DXF and G-codes ESSI making The total ared: 384 m2 Filtration elements: 16 Elements of Noise filter: 85 dBA Ventilation Fan power: 11kW Feature blow dry with compressed air If you have more questions, welcome.

Condition: used, Corner cutting machine GOAL 209/V. Specification: Model:GOAL 209/V Adjustable angle For metal up to: 6 mm Other: not clear if it works Blsdpfjqlankjx Ak Hjg If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2004, Corner cutting machine GOAL 206/V. Fully functional, can be tested. Specification: Model: GOAL 206/V Adjustable angle Table: 1200 x 780 mm For metal up to: 6 mm Weight: 1200 kg Dimensions of the machine: 1200 x 1300 x 1200 mm Bledpfx Ajtq Azmjk Hjg Made in Italy If you have more questions, we will be happy to answer them.

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Blsdpjww Sy Dofx Ak Hjg Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Racks Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Shelf load capacity: 3T If you have further questions, we will be happy to answer them.

Condition: used, Year of construction: 2005, laser power: 4 W, Laser cutting machine FIN POWER L6-A. Very good condition, serviced every six months and major service every 4 years. Full history, service reports included. The machine is connected, can be tested, inspected. Specification: Model: Fin Power L6-A Year of manufacture: 2005 Power: 4 kW Working area (X x Y): 1500 x 3000 mm Working hours: 90,000 resonator worked Cutting: 20 mm black metal, up to 15 mm very clean. Stainless steel up to 12 mm. Aluminum up to 8 mm. Zinc up to 3 mm. Other: Interchangeable tables, two lenses Bsdpfx Aewdtrnek Hjlg Location: Kaunas Can be tested: Yes If you have more questions, we will be happy to answer.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 8161001, cutting width (max.): 780 mm, insertion height: 1,000 mm, POLAR Mohr 78 X Guillotine Paper Cutter (2011) For sale: POLAR Mohr 78 X, a high-precision hydraulic paper cutting machine manufactured in Germany, known for reliability and accuracy in commercial print finishing. Model: 78 X Year: 2011 Serial Number: 8161001 Manufacturer: POLAR Mohr (Germany) Location: Azerbaijan Condition: Machine is in excellent working condition. Fully operational and well maintained. All new photos and videos are available. The machine is ready for inspection and testing at any time. Technical Specifications: Cutting width: 780 mm Power supply: 400 V / 50 Hz / 3-phase Current: 5.7 A CE certified Features: Programmable control system (POLAR X system) High-precision backgauge positioning Hydraulic clamp and cutting system Digital display for accurate measurements Safety light barriers Robust industrial construction Blsdpfx Ajyvrbljk Hsg Easy operation and low maintenance Applications: Ideal for cutting paper, cardboard, printed materials, labels and other graphic products. Suitable for commercial print shops and finishing departments.

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm Bjdpfetmp T Djx Ak Hslg - X - Y axis travel 3200 mm x 1575 mm - air cushion (allows material to be cut while submerged) - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Possibility to equip the machine with additional accessories for an extra charge.

Condition: new, functionality: fully functional, Year of construction: 2020, useful working area: 3000x1500 mm laser head: klinge or precitec (option) X/Y return accuracy: 0.05mm/1000mm table capacity: maximum 800 kg max. speed: 120m/min max. acceleration: 1.5G cutting gas requirement: Oxygen and nitrogen Fiber laser: IPG 2500W metal cutting: steel, stainless steel, stainless steel coated steel, galvanized steel and aluminum (in case of 1kW) weight: 7500 kg Blsdpsy It Ttofx Ak Hsg exchangeable table surface: yes (2 tables, automatic table changer) cover: yes.

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath Bljdpfjv T Truox Ak Hog - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting Bljdpfoym Unzsx Ak Hog - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 69,301 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser source model: Truflow3200, laser hours: 41,349 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 140 m/min, feed rate Y-axis: 140 m/min, repeat accuracy: 0.01 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: nozzle changer, Trumpf TruLaser 3030 (L20) Laser Cutting Machine Year of manufacture: 2013 Working area: 3000 × 1500 × 115 mm Rated laser power: 3,200 W Control system: Siemens Sinumerik 840 D SL Maximum sheet thickness: Steel (St): up to 20 mm Stainless steel (VA): up to 12 mm Bledpoxmpn Uofx Ak Hsg Aluminum (Al): up to 8 mm Maximum traverse speed: 140 m/min Positioning accuracy: 0.01 mm Dimensions: Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Weight: 12,000 kg Equipment: Automatic nozzle changer, voltage stabilizers included

Condition: good (used), Polar Mohr 78 ED Paper Guillotine Very low mileage, very good condition. The machine was purchased from a school workshop and has not been used in production. Technical specifications: Cutting width: 780mm Stack height: 120mm Color LCD display Power supply: 400V Weight: 1400kg Enlarged side tables Bodpfx Akjy Hgk Nj Holg Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Spare knife, cutting sticks, tapping block, and operating tools.

Condition: new, functionality: fully functional, Year of construction: 2022, Laser Welder – IPG Photonics Model: YLR-1500-WC Serial Number: PLMP32200563 Power Supply: 200–240 VAC, 1-phase, 50/60 Hz Power Rating: 4500 VA Manufacturing Date: March 2022 Blodpfx Ajwyb S Iek Heg 2. Control Power Supply / Main Unit – IPG Photonics Model: SYSLC0000058U Serial Number: PD206000 Power Supply: 380–415 VAC Phases: 3P + N + PE Frequency: 50/60 Hz Full Load Current: 25 FLA Overcurrent Protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Circuit Diagram: DOCCHSDMPSXX0225 Manufacturing Date: September 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Manufacturing Date: February 2022 Power Supply: 400/480 V, 3~ (3-phase), 50/60 Hz Overcurrent Protection: 30 A / Type 1 Short Circuit Protection: 50 kA Rated Full Load Current: 16/17 A Motor Current (Max Motor Load): M1 5.5 A Circuit Diagram: P35-001221 Cooling Capacity: 5.5 / 5.9 kW Refrigerant: R407-C, 2.2 kg Maximum Pressure working: 30 bar

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Under a service contract until the very end. Technical Specifications: Bljdpfxjy E Eyys Ak Heg Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate – Tapping block – Spare knife

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Blsdpoy E Eytsfx Ak Heg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: good (used), Robust 800 Roll-to-Sheet Slitter Machine in very good condition, ready for production. Slitting and cross-cutting machine, roll-fed. Sheeter Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc. Easy format setting, computer control. Manual and automatic operation. Technical specifications: Bodpsy E Eymjfx Ak Hjlg Total power: 3.5 kW Working width: 800 mm Maximum roll diameter: 600 mm Maximum roll weight: 250 kg Feeding/cutting length controlled by computer Working speed adjustable via inverter Approximate dimensions (L x W x H): 1970 x 1310 x 1400 mm Weight: approx. 1100 kg Includes a sheet outfeed table.

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: – LCD programmer – photocells – air table – cutting line Blsdpfey E Eygsx Ak Hog – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Bedpfey E Eyajx Ak Helg Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), IDEAL EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: 99 programs, each with 99 steps Data entry via LCD touchscreen Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Switching mm/inch Hydraulic knife and pressure beam drive Photocells Side tables Cutting line Technical data: Cutting length: 550 mm Blodpfey E Ex Njx Ak Heg Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Bsdpfsy E Ey Hex Ak Holg Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks. Bodpfx Aksy E Expj Hjlg

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line Bjdpfx Akey Eyive Helg – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity Bodpfx Akjxwl Tze Helg - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start