Used Wet Painting for sale (4,184)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: Hodpswzl Hxofx Aa Seff After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Year of construction: 2020, condition: new, ROMER® is the largest producer of powder paint shops in Poland, and one of the largest in Europe. ROMER® is over 10,000 manufactured devices operating in over 45 countries around the world. Hfsdsfzq Ryopfx Aa Ssf ROMER® Produces single technological equipment for powder paint shops as well as complete fully automatic turnkey paint shops. ROMER® provides heating solutions for the aero and automotive industries for the largest concerns in the world. We provide warranty and post-warranty service of the devices we sell with a full range of spare parts.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. Hodpfx Aofz Ndyoa Ssff There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Hsdpfx Ajf Aad Nja Ssff Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Hfedefz A H Dopfx Aa Sef Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Hjdeflrc Sepfx Aa Ssff

Condition: new, Year of construction: 2025, warranty duration: 12 months, total width: 1,900 mm, total length: 1,800 mm, total height: 1,550 mm, SPRAY STRIPPING MACHINE – TECHNICAL SPECIFICATION 1. EXTERNAL DIMENSIONS Width: 1 800 mm Length: 1 900 mm Height: 1 600 mm 2. WORKING DIMENSIONS Width: 1 300 mm Length: 1 300 mm Hfodpsghl Dzofx Aa Sef Height: 670 mm* 3. TECHNICAL CHARACTERISTICS Total power: 9.2 kW Heating power: 7.0 kW Pump power: 2.2 kW Number of nozzles: 24 Fluid flow rate: 320 l/min Operating pressure: 4.5 bar Operating temperature: 85°C Construction material: AISI 316 (1.4401) acid-resistant stainless steel 4. TANK CAPACITY & HEATING SYSTEM Indirect heating medium: 167 l (±2%) Main tank capacity (stripping fluid): 480 l (±2%) Heating system: indirect heating jacket, separately controlled 5. MACHINE CONSTRUCTION Machine tank equipped with 4 adjustable legs for levelling. Control panel mounted on the machine base. Equipped with an industrial CLICK-CLACK quick-release connector. 6. CONTROL SYSTEM 2 × temperature controllers: One for the heating jacket One for the main processing tank Process time controller LED indicator lights for monitoring correct process operation. 7. DEVICE CAPACITY Suitable for 4–8 rims up to 23”. 8. PLATFORM GRATE Made entirely of acid-resistant stainless steel AISI 316 (1.4401). Serves as a durable, chemically resistant working area for placing rims or other items to be stripped. 9. ROTATING NOZZLE SYSTEM 2 Rotating Arms The machine features two rotating arms, each equipped with a section of the 24 specially engineered nozzles. Nozzles provide multidirectional, high-pressure spraying for fast and uniform paint removal. Designed for maximum coverage, including internal and hard-to-reach areas of the rim. 10. APPLICATION Spray stripping machines represent a modern and highly efficient method of removing paint from alloy wheels. Their use is increasingly appreciated in automotive workshops, tyre services and professional rim refurbishment facilities. Using this machine significantly improves working comfort by providing perfectly cleaned surfaces, allowing all further service operations to be performed faster and with higher precision. 11. KEY BENEFITS Ideal for rim refurbishment centres, tyre services and automotive workshops. Perfect stripping results thanks to counter-rotating spray nozzles. Extends the service life of other tools and machines due to improved pre-cleaning. Optimises employee working time and increases process efficiency. Ensures consistent, precise and repeatable stripping performance.

Condition: excellent (used), functionality: fully functional, drying rack for drying parts after painting double-sided length of shelves 780mm maximum distance 2520mm minimum distance 350mm 22 shelves bars covered with rubber Hedpfxovcb Ivo Aa Sjff mobile construction clearance between bars 115mm

Condition: new, Year of construction: 2025, Paint booth, TM1010 paint wall made of INOX stainless steel. Working dimensions (mm): 1000 (w) x 1000 (h) x 600 (d) Overall dimensions (mm): 1200 (w) x 2200 (h) Technical data: 1,1 kW fan power, Capacity 4500 m³/h, Compression 870 Pa, Hodpfod S N Swsx Aa Sjff 3 stage air filtration, 96% filtration degree, Explosion proof Ex fan, Inverter to adjust the fan rotation speed, IP 66 control panel, Hermetic lighting IP 65. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: used, Year of construction: 1990, Motor power: 1 kW Hfodpfewv Nbcox Aa Ssf Filter area: 2500 mm x 1600 mm Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg

Year of construction: 2018, condition: like new (used), Deflector spray scrubbers are an air pollution control technology. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas flow to atomize liquid as it passes over them. Hfodoinbi Sepfx Aa Sjf

Year of construction: 2022, condition: new, machine/vehicle number: XXXX, Baffle spray scrubbers are a technology for air pollution control. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas stream to atomize some liquid as it passes over them. Hfedpfjh Akn Uex Aa Sef

Year of construction: 2010, condition: good (used), functionality: fully functional, machine/vehicle number: -, Wet Scrubber (fume abatement) with floating balls complete with pump and centrifugal fan , two booster tanks , chimney with sampling scale . Flow rate about 40,000 m3/hour . Hsdpfx Asuihz Dja Seff

Year of construction: 2022, condition: new, The packed bed wet scrubbers is designed to remove gaseous or vaporous pollutants from an air stream. The process is accomplished by contacting the contaminated air stream with a scrubbing liquor that absorbs or chemically reacts with the pollutants. The cleaned air is then discharged to the atmosphere and the contaminated scrubbing liquor is either disposed of in the approved can be recovered and reused in the original on other processes. In the vertical counter-current design, gas flows upward while scrubbing liquid flows down through banks of sprays. The absorption of gases takes place in the scrubbers random packing section and scrubbing liquid is introduced into a liquid through or spray distribution system. A high-efficiency mist eliminator removes entrained liquids. Clean gas go directly in the atmosfere . Hjdpfx Ajh Apkdoa Ssff

Year of construction: 2022, condition: new, The Venturi Scrubber is a device that generally consists of a centrifugal part capable of separating the solid parts from the liquids and of a Venturi column that narrows in the middle section to vary the pressure and therefore allow the polluting solid particles to fall through the fumes. This type of Scrubber is used for the removal of dust and pollution present in corrosive and dangerous industrial gases. Venturi Scrubbers are used in the abatement of particulates that come from coal, oil or wood boilers, the textile industry but also for emissions from the chemical industries, wood industries, paper mills, etc. Hfodpfxjh Atp Aj Aa Sof

Year of construction: 2010, condition: excellent (used), Deflector spray scrubbers are an air pollution control technology. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas flow to atomize liquid as it passes over them. Hfjdpfxok D Hd Aj Aa Sjf

Condition: excellent (used), drying rack for drying parts after painting double-sided length of shelves 780mm maximum distance 2520mm minimum distance 350mm 22 shelves bars covered with rubber mobile construction clearance between bars 115mm Hfjdpfxsvbf Eco Aa Ssf

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters Hfedjw Rpxcepfx Aa Sef “Paint-Stop” filter Electric panel with IP55 protection class Ceiling light with IP65 protection class Emergency push-button Discharge hopper

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 1308/2013-7, Industrial powder coating booth/paint wall for sale – 2,000 × 600 × 2,000 mm – 10,000 m³/h airflow For sale: industrial paint wall with professional ventilation and filtration system: 📌 Technical specifications • External dimensions: 2,000 × 600 × 2,000 mm • Extracted air: ~10,000 m³/h • Fan: approx. 4 kW • Filter cartridges: 2 pcs + 4-cartridge activated carbon separator • Lighting: 320 W • Electrical: 3 × 380/220 V, 50 Hz 🔧 Accessories • Sheet metal structure with glass panel • Extraction fan + silencer • Automatic filter cleaning • Control cabinet (EU standard) 🟢 Condition: excellent, ready for operation, documented system 💰 Price: • Asking price: 5,200 EUR + VAT Hodpfxsw Nvywo Aa Soff

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Hjdpfsfr T Emjx Aa Soff Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. Hedefr T Eqopfx Aa Ssff We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Hfedpfx Asfv Hiqja Ssf Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Hfjdpfx Aaofn Ndco Sof Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Hsdpfsfn Nddex Aa Ssff Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: excellent (used), functionality: fully functional, Varnishing machine consisting of an automatic applicator and a drying tunnel. UV varnish application using rollers. Laying using an automatic stacker. Varnishing format B1+ Hodpfx Ajwhdbnoa Soff