Used Winding Groove Tubes for sale (4,343)

Condition: good (used), V-belt pulley, belt pulley -Diameter: 630 mm -Belt: 1 -V-belt width: 25 mm Codpfx Ajv Twn Hjlfshd -Hole: Ø 32 mm -Weight: 29.5 kg

Condition: like new (used), Year of construction: 2021, cutting width (max.): 2,500 mm, cutting length (max.): 9,000 mm, Equipment: documentation/manual, PLASMA TUBE AND SHEET METAL COMBINATION WORKING RANGE SHEET METAL MM 2500 X 9000 TUBE DIAMETER FROM MM 80 TO MM 550, TUBE LENGTH MM 9000 YEAR OF CONSTRUCTION 2021 HYPERTHERM BRAND PLASMA GENERATOR MODEL XPR 170 Chjdpfev E Sabsx Alfod

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Codoxpq T Rspfx Alfohd Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Adjustable external electronic rewind Variable speed drive up to 450 meters per minute. • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Guarding to suit current C.E. requirements

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7385, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Transfluid, controller model: IPU 20, pipe diameter (max.): 648 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 180 °, bending radius (max.): 125 mm, bending radius (min.): 50 mm, working width: 6,000 mm, mandrel length: 5,500 mm, number of axes: 3, working height: 1,300 mm, table length: 7,000 mm, table width: 900 mm, table height: 1,300 mm, overall weight: 1,000 kg, total length: 7,000 mm, total width: 900 mm, total height: 1,300 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 1,320 l, operating pressure: 200 bar, Equipment: documentation/manual, emergency stop, Bending software requires a new update. Bending mandrels are available, bending tools are not included. Cedpfx Aloxcxupsfshd

Condition: good (used), V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush Cjdowyvr Aspfx Alfjhd -V-belt pulley: 7-groove pulley type SPA -V-belt width: 13 mm -Mounting: Taper bushing Ø42 x 125 mm (can be changed) -Dimensions: Ø143 x 125 mm -Weight: 9.5 kg

Year of construction: 2019, condition: used, Technical Data: • Working width: min. 20 mm, max. 250 mm • Winding diameter: max. 510 mm • Core sizes: min. 1” to max. 3” (up to 6” with adapter) • Compressed air supply: 6 bar • Web tension: 1–21 N Equipment: • Base frame with two servo motors • 2 pneumatic winding shafts • Web tension system via dancer roller • Splice and label defect detection • Splice table • Measuring roller • Counter • Operation via HMI touchscreen with digital handwheel Features: • Bidirectional winding • Inside and outside winding • Winding tension control: diameter-dependent or independent • Fully reproducible winding results • Integrated job memory (recipe management) • Counter for labels, running meters and diameter Performance Model Gepard 500 Speed: 500 m/min (depending on material and winding diameter) Web width: 250 mm Guide rollers: approx. 80 mm CFRP Counter: Diameter, running meters, label counter with ultrasonic sensors for “clear-on-clear” labels Splice detection: Yes Check for missing labels: Yes Camera upgrade: Possible Printing Module of the HR Series Printing Module: Rea-Jet HR Series, up to 2 print heads, 25.4 mm printing width when supplied with one print head (12.7 mm printing width) Unwinding shafts: CFRP encoder roller (particularly suitable for thin films) with integrated encoder Speed: 60 dpi / 300 m/min; 600 dpi / 30 m/min Front and back printing: Yes Register accuracy: +/- 0.3 mm Ink: DCV2 Splice stations: Fully automatic splice stations for uninterrupted printing Software: Error-free start and stop of the printing process in bidirectional operation. Antistatic bars: 2 DC antistatic bars (one for the front and one for the back) Inspection System HQ 5050 General: Base plate, control unit, 40-inch HD LCD monitor, lighting system, high-performance image processing computer Available Algorithms: • Print image inspection • 2D code detection (only with > 4-MP camera), minimum size 10 mm / single element 0.6 mm / QR code / Micro-QR / Micro-PDF • Barcode capture (only with 4-MP camera), minimum size 0.6 mm / JAN/EAN/UPC / Code39 / Codabar / ITF / Code93 / Code128/GS1-128 / GS1 DataBar / Pharmacode / OCR capture (only with a camera resolution of > 4 MP) • General distance measurement • Data capture in CSV file Lighting: • Top light dome with glare-free illumination and high-performance LED (32,000 Lux) • LED flat dome backlight (30,000 Lux) for transmitted light inspection Camera: Chsdpfxszq U Sys Alfjd • 5-MP QSXGA color camera • 2,448 x 2,048 at 200 x 167 mm > 310 dpi • Min. defect size 0.3 mm • Approx. 160 m/min (100 x 100 mm label) Technical data according to user (without guarantee)

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18 Cedpfxszw Uilo Alfehd

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1,200 units per shift! TECHNICAL DETAILS Production capacity: 150 pcs/h MACHINE DETAILS Electrical data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra / Thin frame machine i-3 – CE version Chsdpfx Alszxgmrjfed Warm-edge spacer production system Production of Intercept ULTRA stainless steel, ThinPlate or BlackLine

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 1250 mm -Wall thickness: 18 mm -Length: 920 mm Cedpfx Alozfag Sofohd -Weight: 519 kg/m

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 810 mm Chjdpfxszfaiyo Alfjd -Wall thickness: 25 mm -Length: 4820 mm -Weight: 486 kg/m²

Condition: good (used), Year of construction: 2010, Weinig Conturex C124-R CNC Window production machine (in right side infeed composition) Chedezg A A Ejpfx Alfjd Also available C124-L (Right-side infeed) year 2019 Description; Year of construction: 2010 Working width 40 - 260 mm Working height 25 - 150 mm Ratio of wood height to width max. 2:1 Powergrip clamping table Table support length 2x 2280 mm Workpiece length without follow-up cycle 220 - 2700 mm Workpiece length with follow-up cycle 2700 - 4500 mm Workpiece length with multiple follow-up cycle 4500 - 6000 mm Full description on request (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Arburg Type: Arburg Freeformer 300-3X PC has been renewed and upgraded Additive manufacturing of complex functional components Chjdpfozd Tiwex Alfod With high-temperature option The new, larger Freeformer 300-3X processes three components in ARBURG Kunststoff-Freiformen (AKF) and, for the first time worldwide, enables the industrial additive manufacturing of complex functional components in a durable hard-soft composite with a support structure. The designation 300 indicates the available component carrier area in square centimeters. The build space now offers 50 percent more space for parts with dimensions of up to 234 x 134 x 230 millimeters compared to the Freeformer 200-3X. "3X" indicates the three axes of the component carrier that can move in the x, y, and z directions. For Additive Manufacturing Manufacturer: Arburg Build volume [cm³]: 7211 Build space X [mm]: 234 Build space Y [mm]: 134 Build space Z [mm]: 230 Printing material: ABS, PC, PLA Class: Industrial Operating voltage: 400 / 400 V 3〜50 Hz Control voltage: 24V= Total rated current: 11 A Total connection: 7.8 kW Year of manufacture: 2019, operating time: 1483 hours Weight: 1593 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control Csdpfxey Ufgre Alfohd AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming REVAMPED AS NEW Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 Cedpfx Ajy Uhxkslfshd 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: good (used), Offer 25475 Manual double unwind/rewind reel Cedpfx Alozkhbnsfehd Technical data: - Coil weight, left + right, up to approx. 1 t - Coil width, each side, up to approx. 300 mm - Coil inner diameter, approx. 380 to 500 mm - Coil outer diameter, up to approx. 1250 mm - Arbor height, approx. 750 mm - Space requirement, approx. W 1250 x D 900 x H 1300 mm - Weight, approx. 200 kg

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Chjdpfx Aozuyxgslfod Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: used, Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate with: angle scale -Drawing: with dimensions in the photos Chodpfx Aled N T Uujfjd -Dimensions: 315/245/H68 mm -Weight: 11.3 kg

Condition: as good as new (ex-display), Year of construction: 2024, Manufacturer: DURMA Model: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 watts Control system: Siemens Sinumerik 840D Operating hours: 24 hours Max. tube diameter: 170 mm Min. tube diameter: 20 mm (12 optional) Max. dimensions of square profiles: 120x120 mm Max. dimensions of rectangular profiles: 150x100 mm Max. profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. profile weight: 37.5 kg/m Max. material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeatability accuracy: +/- 0.05 mm Max. loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H, C, U, L *Footprint L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on the equipment variant Standard equipment Control system Sinumerik 840D Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for outputting analog values (power, speed, pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 watts (including cooler) Chsdpfed Tt Atox Alfjd Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Other machines are available for demonstration at our facility in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: used, Cylindrical roller bearings, spherical roller bearings, deep groove ball bearings -FAG: 6218MA.C3 -Outer diameter: 160 mm -Inside diameter: 90 mm -Width: 30 mm -Price: per piece -Number: 2 pieces Cedpfjd S Ibbjx Alfohd -Weight: 2.7 kg

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Codpfehwrhmjx Alfehd Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 9 grooves -V-belt width: 22 mm -Taper socket recording: Ø 95 mm (can be changed) -Dimension: Ø365 x 240 mm -Weight: 66kg Chsdsm At Hhepfx Alfsd

Condition: used, V-belt pulley, belt pulley -V-belt pulley: Pulley 7 grooves -V-belt width: 17 mm -Intake: Ø69 mm -Dimension: Ø330 x 140 mm Cjdpfx Alsm At Ifefshd -Weight: 29 kg

Condition: used, V-belt pulley, belt pulley -V-belt pulley: Pulley 5 grooves -V-belt width: 17 mm -Intake: Ø38 x 90 mm -Dimension: Ø250 x 135 mm Csdpfjm At Iisx Alfohd -Weight: 18.3 kg

Condition: used, Year of construction: 2017, Overview The winder was manufactured in 2017 by the Spanish manufacturer movitec. It is in operation until the end of September 2023 and can be visited at any time.  Technical data  Max. 120 pallets/ h (with 10 wraps) Dimensions (LxWxH): 5240mm x 3825mm x 4184mm Weight: 2.000kg  Foil width: 500mm  Main frame made of steel  Rotating ring with unwinding device for prestretch film Motorized prestretch system Cutting and welding system Scope of delivery  Protective fence  Winder | Movitec | Saturn S6 | 2017 Compressor | Josval | EDS-900 | 2016 Chjdpfx Aljl Uyfksfed

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley with 4 grooves -V-belt width: 17 mm -Receptacle: taper bushing Ø 48 x 50 mm (can be changed) -Dimensions: Ø 260 x 80 mm Codpsm T Ah Tsfx Alfohd -Weight: 26.1kg