Used Wire Edm Machine for sale (85,740)

Condition: used, Year of construction: 2000, functionality: fully functional, Equipment: compressor, cooling unit, documentation/manual, fridge, EDM (Electrical Discharge Machine) Brand: Sodick Model: AQ325 Dcedpfxsx A Atij Addjr Year: 2000

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 6.0138, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 462 mm, table load: 800 kg, controller model: CHARMILLES ROBOFIL 6020 SI, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to the closure of a business. Bidding commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Dsdpfx Adjxqallsdocr Travel Paths Travel X-axis: 630 mm Travel Y-axis: 400 mm Travel Z-axis: 462 mm Travel U-axis: ±50 mm Travel V-axis: ±50 mm Workpiece Max. workpiece dimensions: 1,260 x 685 mm Max. workpiece height (immersed): 200 mm Max. load capacity: 800 kg Max. workpiece height between feedthroughs: 360 mm Measuring resolution: 0.5 µm Maximum manual speed: 15 mm/s Wire unwind speed Tension, taper offset Maximum workpiece height for wire threading: 300 mm Work tank dimensions: 1,355 x 760 x 425 mm MACHINE DETAILS Control: CHARMILLES ROBOFIL 6020 SI Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,700 x 2,900 mm Weight: 4,000 kg Electrical Details Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 18 A EQUIPMENT Includes matching workshop drawer cabinet with accessories and documentation

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, *Black Week Special Offer until 28.11.2025* AGIECUT Challenge 2 eCut Year of manufacture: 2005 Dcsdpfx Adjxyxfpsder Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes control console with USB port The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered upon request.

Year of construction: 2002, condition: ready for operation (used), Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.35 mm Movement X-Axis Movement 530 mm Z-Axis Movement 400 mm Y-Axis Movement 350 mm This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. Application Types Dcsdpfxox D D Tao Addor EDM

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 2,200 kg, In working condition, removed from production, documentation available. Dsdpfx Asxyyrqoddscr

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Dcjdpfx Adexx Uatodsr Weight: 3,000 kg

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories More pictures and data will follow shortly. Dedjwt N Uqspfx Addjcr

Condition: excellent (used), Year of construction: 2016, operating hours: 29,000 h, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, The offered Mitsubishi MP2400 from 2016 represents an excellent opportunity for companies engaged in or upgrading to high-precision wire EDM machining. With a total operating time of approximately 29,000 hours, the machine is in very good condition and fully operational. Demonstration or test runs are available, allowing interested parties to gain a direct impression of the machine’s condition and performance. Machine data & technical features Series specifications: • Control unit: Advance Plus2 • Max. workpiece dimensions (W × D × H): approx. 1050 × 820 × 305 mm • Max. workpiece weight: approx. 1,500 kg • Table dimensions: approx. 840 × 640 mm • Travel distances (X/Y/Z): approx. 600/400/310 mm • Wire changes possible between Ø 0.05 / 0.10 / 0.20 / 0.25 mm • Linear shaft motor drive system offering supreme precision in the micron range (MP denotes the precision package) Special features of this machine: • Operating time: approx. 29,000 hours • Condition: very good, fully functional, demonstration possible Dcjdpfxsxztuho Addjr • Integrated CAM system directly on the machine (machine programming) • 20-kg wire spool station for less frequent wire changes • Accessories (excl.): 8 clamping bars, various Erowa clamping devices, prisms and custom clamps, ionizer

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, GF AgieCharmilles Progress VP2 Year of manufacture: 2011 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Dodpfxoxyw Ebe Addjcr Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator with power module AGIEVISION 5 control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled after order intake. A test cut with optimal surface finish is performed prior to acceptance. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Measurements depth 1400 mm Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Workpiece weight 500 kg Additional Equipment Water purifier tank Central lubrication Paper filtration Working light This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types EDM Dcjdpfx Adsx D Iifodsr

Condition: good (used), Year of construction: 2008, Cutting hours: 7922 h Fanuc 310 iS-WA CNC X/Y/Z travels: 370 × 270 × 255 mm Max workpiece size: 700 × 600 × 250 mm Tank dimensions: 770 × 600 mm Dcsdpox Dit Sofx Addor U axis: ±60 mm V axis: ±60 mmMachine fully overhauled by Fanuc

Condition: excellent (used), Year of construction: 2010, operating hours: 16,712 h, Sodick AG 400 L Premium in very good condition year of manufacture 2010-11 x, y, z 400 x 280 x 250 mm u, v 120 x 120 mm max. workpiece height 240 mm internal tank dimensions 866 x 626 mm max. workpiece weight 500 kg max. taper 25 degrees 0.1-0.3 mm wire can be used (0.25 mm installed) chiller Dedpsx Aix Esfx Addocr wire chopper quick-clamping system smart grip automatic wire threading complete documentation many accessories machine is under power for inspection.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible. Dsdswr Utijpfx Addjcr

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, machine/vehicle number: 50163, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the bidder to collect the machine within the designated timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis: 300 mm MACHINE DETAILS Electrical Data Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 80 A Connection: 12 kVA Tank dimensions (L x W x H): 900 x 500 x 600 mm Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,500 mm Weight: 4,000 kg Dcsdpsxqp R Djfx Adder EQUIPMENT Documentation

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,154 mm, total length: 2,050 mm, total width: 2,234 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 800 mm, overall weight: 2,450 kg, warranty duration: 6 months, GF Machining Solutions CUT P350 Year of manufacture: 2020 Dcedpexywz Asfx Addjr AC CUT HMI-2 control system Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 200 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 800 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.15 mm to 0.33 mm Overall system dimensions: 2050 x 2234 x 2154 mm Total system weight: 2450 kg The machine will be cleaned, completely overhauled, and tested for all functions by us after receipt of order. We are pleased to offer you commissioning of the machine as well as operator training on the control system.

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Precision wire EDM machine Mitsubishi MV2400R (year 2018) in excellent technical condition, currently in continuous operation, fully functional and ready for work – very low hours (2,700 spindle hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control system: Mitsubishi M700 series Axis travel: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1,050 × 800 × 295 mm Max. workpiece weight: 1,500 kg Table size: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 μm Complete power supply and cooling system – fully operational Machine dimensions: 2,687 × 3,030 × 2,150 mm Weight: approx. 3,500 kg Equipment and accessories: Original upper and lower wire guides Automatic Wire Threading (AWT) Filtration tank with ion-exchange resin Full set of locating fixtures and base devices (in a case) Wire vertical alignment tool Original documentation and operation manuals Djdpexu Hvlofx Addocr Additional equipment purchased for over PLN 40,000: Angular cutting wire guides – upper and lower, 30° Processor battery Precision vise for workpiece clamping Pressure gauge 0–600 PSI – 2 pcs MV power contactor (259320) – 2 pcs CF card with software EDM wire 0.25 mm – 3 new spools 2 sets of new filters Machine transport and handling system Machine condition: Well-maintained, serviced regularly, ready for immediate operation. Complete filtration and cooling systems included. We can assist with transportation, installation, commissioning of the machine, and provide operator training – we have EXPERIENCE. Price negotiable. VAT invoice issued.

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 251070/641311, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table width: 400 mm, table length: 500 mm, No minimum price - guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Djdpfjxqpv Tox Addecr Travel distance X-axis: 350 mm Travel distance Y-axis: 300 mm Travel distance Z-axis: 300 mm Table dimensions: 500 x 400 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 5 A Connection: 5 kVA Dimensions & weight Dimensions (L x W x H): 3,000 x 2,000 x 2,600 mm Weight: 3,000 kg EQUIPMENT Matching workbench Clamping devices Copper electrodes Documentation

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, High-precision wire EDM machine at a special price! AGIECUT Excellence 2 Year of manufacture: 2003 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Dcsdpfoxx Tgxsx Adder Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.1 µm Ra Maximum cutting rate in cylindrical cut: 300 mm²/min Available wire diameters: 0.10 - 0.33 mm Including AGIE universal clamping frame Including AGIE Jogger handbox Including console with 4x USB ports Including AGIE-Setup 3D The machine has been cleaned, overhauled, and thoroughly tested by our technicians. We are also happy to offer commissioning and training on request.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 00402, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 162 mm, workpiece width (max.): 760 mm, workpiece length (max.): 1,100 mm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! This machine is being auctioned as part of an operational closure. Placing a bid obliges the buyer to collect the item within the specified period from 26/01/2026 to 29/01/2026! TECHNICAL DETAILS Travel X-axis: 450 mm Travel Y-axis: 320 mm Travel Z-axis: 162 mm U-axis travel: ± 50 mm V-axis travel: ± 50 mm Max. workpiece dimensions: 1,100 x 760 mm Max. load capacity: 500 kg Max. workpiece height during immersion: 200 mm Max. workpiece height between wire guides: 360 mm Max. workpiece height for wire threading: 200 mm Tank dimensions: 1,150 x 200 x 2,280 mm Tank capacity: 1,000 l Measuring resolution: 1 µm Max. manual speed: 15 mm/s MACHINE DETAILS Control system: CHARMILLES Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 9 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,700 mm Weight: 5,000 kg Dcsdpfjxqpvyox Addjr EQUIPMENT Matching workshop drawer cabinet Corresponding accessories Documentation

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF AgieCharmilles CUT E 600 – Used Wire EDM Machine, Year of Manufacture 2019 The GF AgieCharmilles CUT E 600 from 2019 is a high-precision and reliable used wire EDM machine, setting new standards in productivity, precision, and operating comfort through Swiss engineering and state-of-the-art technology. It is designed to meet the highest demands in tool and mold making, medical technology, and precision manufacturing. Main Features & Benefits ✅ Large Working Area and Robust Construction Dsdpfx Asxwk Anjddjcr Traverse paths (X/Y/Z): 600 x 400 x 350 mm Traverse paths (U/V): ± 50 mm Max. workpiece size: 1030 x 800 x 350 mm Max. workpiece weight: 1,000 kg T-shaped design with a lowerable door for easy loading even of heavy workpieces ✅ Maximum Precision and Repeatability Glass scales on all axes for long-term accuracy without recalibration Contour accuracy up to ± 2 µm, surface roughness up to Ra 0.12 µm Thermally stable construction for consistently precise results ✅ State-of-the-Art Digital Generator (IPG) Up to 18% faster processing compared to previous models Anti-electrolysis technology for improved surface quality and increased service life Automatic power adjustment (POWER-EXPERT) to prevent wire breakage TAPER-EXPERT for taper cuts up to 30° over 77 mm height ✅ Intelligent Control – AC CUT HMI with 19” Touchscreen Windows-based control system with intuitive user interface 3D graphics, DXF import, and real-time process monitoring PART-EXPERT and WIRE-EXPERT for optimal cutting conditions and precise results Remote control included as standard ✅ High Productivity and User Friendliness Automatic threading and re-threading, even for hard wires Large 25-kg wire spool for extended operation times Energy-saving ECONOWATT system reduces idle power consumption to < 1 kW Compact footprint (approx. 4 m²) for optimal integration into any workshop Ideal For: ✔ Tool and mold making ✔ Precision components from steel, carbide, or copper alloys ✔ Series production and small batch manufacturing with high quality standards 📌 Our used 2019 machine undergoes professional cleaning, servicing, and thorough testing prior to sale to ensure maximum quality and reliability. 📩 Contact us for a customized offer or a demonstration!

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 3003500029, travel distance X-axis: 650 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 460 mm, table length: 720 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26/01/2026 and 29/01/2026! TECHNICAL SPECIFICATIONS Travel X-axis: 650 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Table dimensions: 720 x 460 mm MACHINE DETAILS Dcsdsxqn Ibepfx Addor Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 18 A Connected load: 12 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 2,700 mm Weight: 5,000 kg EQUIPMENT Workshop drawer cabinet Documentation

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 3,300 kg, warranty duration: 6 months, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Dcjdpfxjxwktmj Addor Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Manual tank door (accessible from one side) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete unit: 2600 x 2600 x 2340 mm Total weight of the unit: 3,300 kg The machine will be cleaned, fully overhauled, and functionally tested by us after the order is received. You will receive a 6-month warranty on the machine. We are happy to offer you commissioning of the machine.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Vertex 2 Year of manufacture: 2007 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.05 µm Ra Available wire diameters: 0.07 - 0.33 mm Dcodpfx Adoxwb Stsdjr Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered on request.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, AGIECUT Progress V2 Year of manufacture 2009 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator with power module AGIEVISION control unit Dedpovax Iujfx Addecr Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg Dodpfjxq Akwox Addocr The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.