Used Wire Pin for sale (8,436)

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire EDM machine (2018), in excellent technical condition, continuously operated, fully functional, and ready for immediate use – very low operating hours (only 2,700 hours). Technical Specifications: - Year of manufacture: 2018 - Manufacturer: Mitsubishi Electric - Model: MV2400R - Control system: Mitsubishi M700 Series - Axis travel (X/Y/Z): 600 / 400 / 310 mm - Max. workpiece dimensions: 1050 × 800 × 295 mm - Max. workpiece weight: 1,500 kg - Worktable size: 840 × 700 mm - Wire diameter: 0.1 – 0.3 mm (0.25 mm currently in use) - Positioning accuracy: ±1 µm - Power supply & cooling: complete and fully functional - Machine dimensions (L×W×H): 2687 × 3030 × 2150 mm - Weight: approx. 3,500 kg Equipment and Accessories: - Original upper and lower wire guides - Automatic Wire Threading (AWT) - Filter tank with ion-exchange resin - Complete set of clamping and locating devices (in carrying case) - Wire alignment device - Original operation manuals and documentation Additional accessories purchased for over €10,000: - Wire guides for 30° angle cutting (upper and lower) - Processor battery - Precision workpiece clamping vise - 0-600 PSI pressure gauge (2 pcs) - MV power contact (259320) (2 pcs) - CF card with software - 0.25 mm EDM wire – 3 new spools - 2 sets of new filters - Machine transport and handling system Dedpfx Aoxu Hvlofpeun Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Complete filtration and cooling systems included. We offer assistance with transport, installation, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price negotiable. VAT invoice available. Export (0% VAT) possible.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 591.063.002.0050, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, The AgieCharmilles CUT 300 Sp is a high-performance and versatile wire EDM, ideal for precision manufacturing of molds, prototypes, and complex components, offering: * extensive spatial travels * large dielectric capacity * ability for taper cutting Dujdpfx Afowwrk Nepsn * robust CNC control system.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications. Dodpjwwq S Sjfx Afpoun

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: * wide angular range capabilities (up to 30–45°), * efficient and intelligent IPG generator, * accuracy within a few µm, Dujdpfxjwwrtwo Afpjn * advanced automation systems and anti-collision protection, * stable, durable design enabling fully automatic operation.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Duodpfx Afowww Sxspon Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg C‑Axis: full rotation – ideal for rotary electrodes

Condition: good (used), Year of construction: 2008, Cutting hours: 7922 h Fanuc 310 iS-WA CNC X/Y/Z travels: 370 × 270 × 255 mm Djdpfx Afjx Dit Sepsun Max workpiece size: 700 × 600 × 250 mm Tank dimensions: 770 × 600 mm U axis: ±60 mm V axis: ±60 mmMachine fully overhauled by Fanuc

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Dsdpfoxyxfpex Afpeun Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port The machine will be cleaned, overhauled, and tested by us after receipt of the order. Commissioning and training can also be provided upon request.

Condition: good (used), Year of construction: 1984, indoor crane, crane, electric wire rope hoist, manual trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Manufacturer: Abus, crane chassis with electric cable hoist -Cable pull: Type GM1032FD -Load capacity: 3200 kg Dedpfx Aju I Hpaefpoun -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roll spacing: 1400 mm, dimensions see photos -Drive: Abus -Accessories: connecting cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Dusdpfx Afjr E Ht Hopon Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 3030 mm Measurements depth 2687 mm Measurements height 2150 mm Machine weight 3500 kg Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 150 mm U-Axis Movement 150 mm Workpiece Workpiece weight 1500 kg Additional Equipment Cooling/Temperature Control: Cooling system with temperature regulation Generator: Transistor pulse generator Output Current: 50 A Generator Size: 600 x 650 x 1765 mm Generator Size: 600 x 650 x 1765 mm This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Application Types EDM Dodpfx Afjx D Rqfspeun

Condition: good (used), Hohner Favorit wire stitcher Very good condition, ready to work. A reliable machine, with legendary durability. Technical data: performance: 160-225 cycles / min sewing thickness: 25mm (piercing up to 40mm without closing the clamp from the bottom) wire diameter: max. 1mm Dusdpfxowungbs Afpon Power supply: 380V Weight: 280kg The machine has an adjustable table for block and booklet sewing.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, With the following equipment: i-groove technology • Travel paths: 600 x 400 x 350 mm • 19" multitouch LCD screen • L-Cut (wire chopper) • 3D SetUp • integrated Jumbo Feeder 25 kg Warranty until 06/2026 Dusdpfx Afox U Tkfepsn

Condition: used, Year of construction: 2004, Technical details: Dedpsuzbayjfx Afpsun table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: refurbished (used), Year of construction: 2010, operating hours: 9,563 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,100 mm, total width: 2,800 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 4,440 kg, table length: 950 mm, GF CUT30P - 2010. Available for inspection at our premises in Semsales (Switzerland). Viewing by appointment. More information upon request. Dusdpfx Asyazkcofpjn

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, lifting height: 6,000 mm, load capacity: 5,000 kg, lifting speed: 50 mm/s, power: 4.5 kW (6.12 HP), input voltage: 400 V, input frequency: 50 Hz, wire rope hoist Konecranes CXT400 5000kg emag.6m bridge crane trolley, hoist, crane single girder bridge crane mounted 5 ton crane trolley for sale Manufacturer: Konecranes CXT400 Year of manufacture 2004/11 Dujdpfxexpphme Afpjn Load capacity: 5000 kg Working height: 6 m Type: CXT40410050P35FBL0F Date of manufacture: 29.01.2001 Lifting speed: Fast: 5.0 m/min Slow: 0.8 m/min Side travel speed: Fast: 20 m/min Slow: 5 m/min Voltage: 400v 50Hz Drive: 4.5/0.7kw Controller: 48V

Condition: used, functionality: fully functional, Year of construction: 2001, lifting height: 8,000 mm, load capacity: 5,000 kg, input frequency: 50 Hz, wire rope hoist Konecranes XL300 5t emag.8m bridge crane trolley, hoist, crane double girder bridge crane mounted 5 ton crane trolley for sale Manufacturer: Konecranes Load capacity: 5000 kg Working height: 8 m Type: XL304N20ADA409B0K0 Date of manufacture: 29.01.2001 Lifting speed: Fast: 4.0 m/min Slow: 0.6 m/min Side travel speed: Dedpsxpphtsfx Afpjun Fast: 25 m/min Slow: 6.3 m/min

Condition: good (used), Wire Welding Machine Stock number: 2793 Manufacturer: CEA Year of manufacture: Model: Maxi-compact 370 2100 HE 1252 Machine number: 9004382 Welding current at 35% duty cycle: 370 A / 32 V at 60% duty cycle: 300 A / 29 V at 100% duty cycle: 230 A / 25 V Connection: 18 kVA Cooling type: Equipment: Torch hose package for connection; welding torch; mobile unit Dimensions: 1,000 x 700 x 1,000 mm Dusdjx Uwcfjpfx Afpon Weight: 0.5 t

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Dusdpfxex D Rcze Afpjn Machine weight 4400 kg Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Workpiece weight 1500 kg Additional Equipment Wire diameter: 0.1 – 0.3 mm This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Djdox D Iv Sspfx Afpjun Application Types EDM

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 11001257, Scansonic ALO3-DYD2W-1.7 – Laser Processing Head / Laser Optics with Fronius Drive Wire Feeder Manufacturer: Scansonic Model: ALO3-DYD2W-1.7 Serial Number: 11001257 Date of Manufacture: 2018/02 Material/Assembly Code: KG0033-020-BA Condition: Used, very good technical condition Description: The Scansonic ALO3-DYD2W-1.7 is a laser processing head from the ALO3 series, designed for high-precision laser joining processes. Thanks to its compact design and high repeatability, it is ideally suited for: - Laser welding - Laser hybrid welding (Laser + MIG/MAG) - Laser brazing - Robot-based precision applications The ALO3 series is used worldwide in the automotive and supplier industries and offers: - Excellent seam tracking - Robust mechanics for 24/7 industrial operation - Precise process monitoring - High compatibility with CO₂, Nd:YAG, and fiber lasers This ALO3-DYD2W-1.7 model is a variant with specific focus/optic parameters (1.7), optimized for certain welding or joining processes. Technical Data (according to nameplate & product family) Type: ALO3-DYD2W-1.7 Serial Number: 11001257 Year of Manufacture: 2015 Patent Numbers: DE 1000685 US 6,596,962 EP 11 25 672 Robust industrial optics for laser processing Compatible with leading robot manufacturers (e.g. KUKA, ABB, Fanuc) Areas of Application: Automotive industry / Body-in-white production Serial laser joining processes Aluminum and steel connections Welding in robotic applications Precision seam tracking with adaptive control (enabled by Scansonic systems) Condition: Removed from running operation Visually clean Dedpfx Asx H S Sljfpeun Mechanically fully functional Serial number and optic parameters clearly legible Scope of Delivery: - Scansonic ALO3-DYD2W-1.7 laser processing head - Fronius Drive wire feeder

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch Dedpfxjx I Icvo Afpjun -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch Dusdpfxex I H Rxj Afpon -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m Djdpfx Aex I E U Aofpeun -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

Condition: good (used), MIG/MAG hose package for robot Duodpfjfc T Tusx Afpsn -Hose package with: wire feeder for robots or welding machines -Length: 2.5 m -Water cooled -Number: 2 wire feeders available -Price: per piece -Weight: 5.5 kg

Condition: good (used), Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder Dusdex I Ef Iepfx Afpsn -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg