Used Wire Pin for sale (8,358)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Fgodpfx Aezlc Tbeptsg

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg Fgodpfezuclisx Apteg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,883 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Fodpfx Apjzuufbjtjgg Mast: Z + i - 3F9800 ID: 25114.5388 Category: Used Mast: 3F Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1,200 kg Platform height: 9,000 mm Picking height: 10,600 mm Initial lift: Yes Cabin width: 1,300 mm Year: 2020 Operating hours: 4,883 hrs Battery: 48 V / 620 Ah Options: FULL options !! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION !! – PSA – Blue spot – Adjustable forks – Induction / wire guidance

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,672 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5387 Category: Used Mast: Triplex (3F) Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Init.: Yes Cabin width: 1300 mm Year: 2020 Operating hours: 4672 hours Fedpfozuud Rjx Aptogg Capacity: 48 V / 620 Ah Options: - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable forks - Induction / Wire Guidance

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg Fedpfx Apexx Uatstsgg

Condition: good (used), Year of construction: 2001, - Number of axes: 5 - X-axis travel: 350 mm - Y-axis travel: 250 mm - Z-axis travel: 256 mm - Voltage: 3 × 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A Fodpfozxq Iyox Aptsgg - Workpiece size is limited to 750 x 550 x 256 mm and 400 kg No documentation available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please use the contact form.

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 4,059 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0180 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Fodpfxjzv H N Io Aptsgg Platform height: 8900 mm Picking height: 10500 mm Initialized: Yes Cabin width: 1200 mm Year: 2015 Hours: 4059 hours Capacity: 48 V / 620 Ah - Year of manufacture: 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Year of manufacture: 2014, available from the end of August. Fodpfx Apezuvyaotogg

Condition: ready for operation (used), Year of construction: 2011, Fanuc RoboCut Alpha 01E Year 2011 X-axis travel is 600 mm Y-axis travel is 400 mm Z-axis travel is 300 to 310 mm. Workpiece Capacity: Accommodates pieces up to 1050 mm long, 820 mm wide Weighing up to 1,000 kg. Control Unit: Uses the advanced Fanuc Series 31i-WA CNC system. Features: Includes automatic wire threading (AWF), reliable re-threading, Fjdpfjzvlgrex Aptogg integrated fluid cooling, and precision twin-servo wire tension control.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000S Year of manufacture: 2018 Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm incl. option KIT 50 Fodpszlx A Sjfx Aptjgg Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER handheld control box for convenient setup VISION 5 control system 15" LCD color screen, jog shuttle and mouse Incl. AGIESETUP 3D Incl. Conic-Plus option for improved taper Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We will gladly perform an individual test cut. We also offer commissioning and training on-site for this machine.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: W150474, workpiece weight (max.): 1,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 420 mm, workpiece height (max.): 420 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, documentation/manual, The Makino U6 H.E.A.T. is a high-precision wire EDM machine for machining tool steel, hard metal, titanium, Inconel, and other difficult-to-machine materials. It is specifically designed for tool and die making, aerospace, medical technology, and precision manufacturing. Key technical specifications: Travel ranges (X/Y/Z): 650 × 450 × 420 mm U/V axes: ±75 mm Max. workpiece size: 1,000 × 800 × 400 mm Max. workpiece weight: 1,500 kg Available wire diameters: 0.10 / 0.15 / 0.20 / 0.25 / 0.30 mm Work table: 910 × 710 mm (hardened, usable on four sides) Special features of the H.E.A.T. version: *H.E.A.T. (High Energy Applied Technology) for significantly higher cutting speeds under difficult flushing conditions. *Two independent high-performance flushing pumps for higher pressure and better removal of erosion particles. *Four-stage filter system with air vent for easier filter replacement. *Split-V wire guide, which is much more durable than conventional round wire guides and requires less maintenance. *Hyper-i control with 24" touchscreen, mouse, and keyboard, as well as integrated manuals and training videos. Fgodpezq Tc Dsfx Apteg

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER hand box for comfortable setup VISION 5 control 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Fjdpfx Apjztp Emjtjgg Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm Fgjdpfxeyu Nqms Aptjg U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 250 mm Fgsdpfxezu Rurj Aptsg max. workpiece size X: 590 mm max. workpiece size Y: 450 mm max. workpiece size Z: 250 mm max. workpiece weight: 550 kg table size X: 935 mm table size Y: 770 mm U / V axis: 80 CNC wire EDM machine X/Y travel: 400 × 300 mm Z-axis travel: 250–350 mm U/V axes: 80 × 80 mm Taper cutting: up to ±20° at 80 mm workpiece height Max. workpiece dimensions: 590 × 450 × 250 mm Max. workpiece weight: 550 kg Large worktable: 935 × 770 mm Wire diameter: 0.1–0.3 mm Max. wire speed: 420 mm/s Linear motor technology on X and Y axes Suitable for high-precision contours and complex workpiece geometries U/V axes also enable angled and taper cutting

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Fodpfezv H N Uex Aptsgg Condition: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 hours Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING FUNCTION!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: ready for operation (used), Year of construction: 2011, operating hours: 24,731 h, functionality: fully functional, machine/vehicle number: W120273, Wire EDM machine Makino DUO43 Year of manufacture: 2011 Travel ranges (X/Y/Z): 450 x 300 x 320 mm Travel ranges (U/V): +/- 101 mm Max. workpiece dimensions: 710 x 560 x 300 mm Max. workpiece weight: 800 kg Available wire diameters: from 0.10 to 0.30 mm Max. spool weight: 16 kg Fgodpfx Aozudqysptjg The machine was recently in operation at our customer's site and can be inspected while powered on.

Year of construction: 2007, condition: ready for operation (used), A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Fsdpfxezka Nwe Aptsgg

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Manufacturer: MANZ PLC control, touch screen display, Siemens Fjdpfeznli Djx Aptjgg

Condition: used, Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total width: 2,710 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, For sale is a well-maintained Mitsubishi FA20 wire erosion machine. Fedpfozln Tgox Aptsgg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Fedpfeyhb D Eex Aptsgg

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Fedpfozv H Nzsx Aptjgg Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 3483 hours Capacity: 48 V / 620 Ah - Year of manufacture 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Year of construction: 2005, condition: used, A Numalliance CNC wire bending machine for the production of 2D and 3D wire-formed parts is offered. Axes: 7, wire diameter range: 3mm-10mm, control: CNC. Weight: approx. 4100kg, dimensions X/Y/Z: approx. 7900mm/3700mm/2000mm. Documentation available. The machine has been shut down since 2025. An on-site inspection is possible. Fgjdjzv T I Ropfx Aptsg

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece weight (max.): 35 kg, travel distance X-axis: 220 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 100 mm, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2014 Travel distances (X/Y/Z): 220 x 160 x 100 mm Travel distances (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Fodpfx Apszvx S Istsgg Wire diameter from 0.05 mm to 0.20 mm (including option KIT 50) Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handheld control unit for convenient machine setup 15" LCD color screen with jog wheel and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg After receiving the order, the machine will be cleaned, fully overhauled, and thoroughly tested by our specialists. We will gladly put the machine into operation at your facility and provide training on the control system and machine operation.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 240 SL Year of manufacture: 2004 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Fgedpfx Apszwv S Iotog Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is currently in use at our customer's site and will be available from September. We would be pleased to offer the following services: - Cleaning and overhaul of the machine - Commissioning and training - Delivery - Clamping devices - Cooling unit - Transport

Condition: like new (used), Year of construction: 2017, operating hours: 4,764 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413X + i - 100 - 3F6000 ( = 600 DZ ) ID:24096.5461 Fsdpfx Aszv H Speptegg Cat.:Used Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Year:2017 Hours:4764 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance