Used Wire Reel for sale (3,729)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Ljdpfx Aezu N Abopdjag Automatic wire threading

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Lajdpfx Apjxx Uatodeg Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Condition: used, Year of construction: 1990, machine/vehicle number: 76/90, working direction: left-right; single head. working direction: left-right electrical power supply kW: 420 Lajdpfjzzplpox Apdeg

Condition: used, Year of construction: 1992, functionality: fully functional, RENZ Wire Closer Model CLE 70 Year 1992 CLE 70 electric spiral crimping device: Electric crimping via foot pedal Binds up to 34 mm (340 sheets) in one cycle Efficiency approx. 400 cycles/h depending on the type and format of the material Foot-operated cycle start allows positioning the material with both hands Supports spirals with a diameter of 3/16” – 1 1/2” regardless of pitch Ledpfozzyw Aox Apdjag Quick settings of various spiral diameters in just a few seconds Quiet operation. The device does not require a compressor.

Condition: excellent (used), functionality: fully functional, Manufacturer Julius, type AH 41 Inner coil diameter from 250 to 300 mm Max. width 295 mm With brake Lsdpfxszzkl Ds Apdjag Good condition, ready for immediate use

Condition: excellent (used), Year of construction: 2003, Sodick AQ535L wire EDM machine Year: 2007 5-axis Technical details: X-axis travel of 550 mm Y-axis travel of 350 mm Z-axis travel of 300 mm U/V axis: 80/80 mm Work table size is 790 x 500 mm, Ledpfx Apszqzznjdsag Maximum workpiece weight capacity of 800 kg Work tank dimensions (W x D): 1100 x 720 mm Distance from floor to table top: 1005 mm Workpiece capacity: Maximum workpiece height: 290 mm Wire system: • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 590 mm Ljdpfx Aszu Rurepdeag max. workpiece size Y: 450 mm max. workpiece size Z: 250 mm max. workpiece weight: 550 kg table size X: 935 mm table size Y: 770 mm U / V axis: 80 CNC wire EDM machine X/Y travel: 400 × 300 mm Z-axis travel: 250–350 mm U/V axes: 80 × 80 mm Taper cutting: up to ±20° at 80 mm workpiece height Max. workpiece dimensions: 590 × 450 × 250 mm Max. workpiece weight: 550 kg Large worktable: 935 × 770 mm Wire diameter: 0.1–0.3 mm Max. wire speed: 420 mm/s Linear motor technology on X and Y axes Suitable for high-precision contours and complex workpiece geometries U/V axes also enable angled and taper cutting

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW Lajdpfx Aein Rn Aspdsg -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: good (used), The scope of delivery includes: 106x wire mesh grating, new Laedpei Hkpdjfx Apdog Material color: Sendzimir galvanized Load capacity: 500 kg; with uniformly distributed load Design: resting Depth: approx. 1,100 mm (direction of support bars) Width: approx. 1,150 mm Mesh size: approx. 100 x 60 mm Number of crossbars: 3 pcs. Weight: 5.00 kg | per piece

Condition: new, Included in delivery: 01x Wire mesh, new Manufacturer: Garantell Material finish: sendzimir galvanized Design: placed on top Total depth: approx. 1,118 mm Inner depth: approx. 1,105 mm Upright depth: approx. 1,100 mm Beam support width: approx. 53 mm Clear supporting width: approx. 998 mm Width: approx. 1,340 mm Ljdpfxeyz Ir Re Apdoag Mesh size: approx. 110 x 95 mm Wire gauge: approx. 4.00 mm Weight per piece: approx. 6.75 kg Number of support bars: 05 pcs Support bar dimensions: approx. 998|50|1.25 mm Maximum load capacity: 500 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. If transport or shipping is required, it will incur additional costs, which can be individually requested from us depending on the place of delivery or the scope of delivery.

Condition: good (used), Technical data for the shelf panel: Shelving system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x shelf panel, used Material finish: Sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 590 mm Overall height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight per piece: approx. 6.90 kg Note: Water-permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows for good air circulation, e.g. in deep-freeze warehouses. Light-permeable – ensures a bright working environment in the warehouse. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Lajdsyzpiqjpfx Apdsg Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transportation or dispatch beyond collection is subject to additional costs, which can be requested from us separately depending on the delivery location and scope.

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Lajdpszuvyajfx Apdjg Year of manufacture: 2014, available from the end of August.

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Ljdpfez Ar Agex Apdoag Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 2 of Auction 3505

Condition: used, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on site for loading. Laodpfozy Uk Iox Apdjg For sale is a wire erosion machine manufactured by AGIE, model: Agietron Integral 3.

Condition: used, Winding and unwinding mandrel OBRU, type HM Order number 66239, year of manufacture approx. 1970 Coil weight 80 kg Coil width max. 200 mm Coil inner diameter 270 - 450 mm Coil outer diameter max. 650 mm Center of mandrel shaft to mandrel base 720 mm Mandrel speed 16 rpm Motor power 0.18 kW Mains connection 380 volts, 50 Hz - Coil support by 4 cantilever bolts - Central spreading of the 4 support bolts via eccentric rotating lever - Gear drive via geared motor - Mechanically adjustable slip clutch - Height adjustable by clamping to the support column Laodpozt U Iysfx Apdog - Motor circuit breaker Dimensions L x W x H 960 x 650 x 1100 mm Weight 110 kg Good condition

Condition: ready for operation (used), Year of construction: 2011, operating hours: 24,731 h, functionality: fully functional, machine/vehicle number: W120273, Wire EDM machine Makino DUO43 Year of manufacture: 2011 Travel ranges (X/Y/Z): 450 x 300 x 320 mm Travel ranges (U/V): +/- 101 mm Max. workpiece dimensions: 710 x 560 x 300 mm Max. workpiece weight: 800 kg Available wire diameters: from 0.10 to 0.30 mm Max. spool weight: 16 kg The machine was recently in operation at our customer's site and can be inspected while powered on. Lasdpfozudqyjx Apdog

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. We can also handle commissioning and training. Lsdpfxszuclij Apdoag We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: ready for operation (used), functionality: fully functional, USED PULSED INVERTER WIRE WELDER, 400 Amps, MIGATRONIC BDH 400, refurbished like new. Laodpfx Apozxwzyodjg

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Ljdpfx Apow Rqu Sedjag

Condition: good (used), Year of construction: 2019, functionality: fully functional, Valmet RoboCoiler for automatic de-wiring of bales. There are 2 units. Each unit consist of a turntable, metal detection, cutting and spooling unit. CHARACTERISTICS ▪ Max. 140 balen/hr ▪ Bale length: 700 – 1000mm ▪ Bale width: 580 – 900mm ▪ Bale height: 350 – 650mm ▪ Bale weight: max. 333kg ▪ Wire diameter: 1.8 – 3.0mm Ljdpfozy Nlaox Apdeag ▪ Strength: 500 – 1250 N/mm2

Condition: used, Year of construction: 2002, Travel ranges: X 350 mm Lajdpfxozumk Ne Apdjg Y 220 mm Z 220 mm Automatic rethreading Coolant bath without cooler

Condition: ready for operation (used), Used and fully functional RMG 89 wire drawing machine: Max. diameter: 14 mm. Capstan diameter: 900 mm. Drawing force: 3,850 kg. Motor: 18.75 kW Speed: 21.25 m/min. Lajdpfszx Rikjx Apdog Weight: 2,000 kg.

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Laodpfxsv Nhk Ds Apdog Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER hand box for comfortable setup VISION 5 control 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Laedsztp Emepfx Apdjg Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.

Year of construction: 2010, condition: new, Wire electrodes ELGACORE - MXA 100 Lasdpfx Ashq T Iijpdjg 1.4 mm diameter Approx. 60 pieces from stock