Used Wire Stitching for sale (3,681)

Condition: excellent (used), Year of construction: 2025, Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device Dodpfxjxvh Hue Aagskw -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Condition: used, length 570 mm Dedpfexu Nvnox Aagjkw height 440 mm total power requirement 20 kVa weight of the machine ca. 50 kg

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 1800 mm Measurements height 2200 mm Dsdpfxjxpyvho Aagskw Movement X-Axis Movement 550 Y-Axis Movement 400 Z-Axis Movement 350 This 5-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: used, offer consists of: Dsdpfx Aoxrz Udeagjkw 2x Hohner 43/6 stitching heads more technical details /weitere technische Daten: ?interne_refnummer=10190

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale weight: 700 kg, overall weight: 33,000 kg, oil tank capacity: 2,000 l, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 FU Year of construction 2010 Operating hours approx. 40.000 hours, as of July 2025 Main press force 880 kN Specific pressing force 107 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 990 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 105 kW Total current consumption 200 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 500 up to 700 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 14,000 x 23,000 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2010 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 13,905 mm Length goose neck 3,732 mm Grade 30° Nominal width 1,800 mm Effecting width 1,641 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 12,200 x 3,000 x 1,500 (l x w x h) Scope of delivery: The conveyor belt (without steel podium and maintenance platform), baling press, bale chute and wire drawing stations are for sale, without wire. The plant will remain in operation until March 2026, when it will be replaced by a new press line. Dkodpexr N Tbefx Aagow Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Steel wire sheet cutter Dedpsgiplvefx Aagskw Cutting length 3900 mm Dimensions Length: 5100 mm Width: 1700 mm Height:3100 mm

Year of construction: 2001, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 220 mm U/V-AXIS TRAVEL: ± 80 mm MAX  PIECE WEIGHT: 450 Kg TANK SIZE: 895 x 650 x 220 mm TABLE SIZE: 600 x 400 mm DRAFT ANGLE / DRAFT HEIGHT: 20 °; 80 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,1-0,3 mm WEIGHT: 3000 Kg OVERALL DIMENSIONS: 1650 x 2125 x 2080 mm ACCESSORIES: ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT Djdpfx Aorhl Iioagskw

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Path Travel path X-axis: 600 mm Travel path Y-axis: 400 mm Travel path Z-axis: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Total weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of input current: three-phase current EQUIPMENT Dkodpfxexu Uzce Aagow 16 kg spools Note: Dismantling and loading can be carried out by the seller at an additional charge.

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 2200 kg Control Unit Brand FANUC Model 31i-WB Movement Z-Axis Movement 255 mm Workpiece Workpiece weight 500 kg Additional Equipment Optional Thin wire, Wire diameter [mm]: Ø 0.05 ~ Ø 0.30 Automatic front door UV axis travel [mm]: ± 60 × ± 60 Minimum step increment of the drives [mm]: 0.0001 Dkedpfx Aexqtdnsagsw This FANUC Robocut alpha-C400iB was manufactured in 2018. It features a maximum workpiece size of 730 x 630 x 250 mm and can handle weights up to 500 kg. The machine includes a FANUC 31i-WB controller and supports wire diameters from 0.10 to 0.30 mm. Consider the opportunity to buy this FANUC Robocut alpha-C400iB wire edm machine. Contact us for more information. Application Types EDM

Condition: used, offer consists of: 2x Hohner 43/6 stitching heads Dksdpexrz T Hofx Aagew suitable for any kind of booklet maker / saddle stitcher We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Dksdpfxjxrta Ej Aagjw Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Travel (X/Y/Z): 350 × 250 × 250 mm Dodpsxt Rr Uefx Aagjkw Max. workpiece dimensions (X/Y/Z): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (450 kg) Max. taper angle: +/- 30°, 100 mm Travel (U/V): +/- 70 mm Automatic wire threading Wire diameters: 0.10–0.33 mm AGIE IPG generator with power supply module Machine dimensions (mm): 1640 × 2040 × 2220 mm Machine weight: 3350 kg Bsw Nexqru Ss Hrdhsdi Cooling: external cooling required Best surface finish: Ra 0.2 µm Year of manufacture: 2006 Fully functional

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Dkedpfx Asxq Akweagow Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.

Condition: used, Year of construction: 1999, max 70 mm hydraulic ja Dkjdow Sygajpfx Aagjw

Year of construction: 2001, condition: ready for operation (used), General Data Machine weight 2600 kg Control Unit Brand FANUC Model 18i-W Movement X-Axis Movement 520 mm X-Axis Rapid Traverse 900 mm/min Y-Axis Movement 370 mm Y-Axis Rapid Traverse 900 mm/min Z-Axis Movement 310 mm Z-Axis Rapid Traverse 900 mm/min V-Axis Movement 120 mm V-Axis Rapid Traverse 450 mm/min U-Axis Movement 120 mm U-Axis Rapid Traverse 450 mm/min This FANUC Robocut Alpha 1ia was manufactured in 2001. It is a wire EDM machine featuring a large stroke with X: 520 mm, Y: 370 mm, and Z: 310 mm. It can handle a workpiece mass up to 1000 kg and requires a power supply of 13 KVA. Consider the opportunity to buy this FANUC Robocut Alpha 1ia wire edm machine. Contact us for more information. Dkedpfx Aoxq Hrljagow Application Types EDM

Condition: used, offer consists of: 2x Hohner 48/5 S ring eyelet stitching heads suitable for any kind of booklet maker / saddle stitcher - weight: 5,4kg Dkodpfoxrz Tyox Aagow We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Steel cables, wire ropes, lifting slings made of steel Length: 10 m Diameter: 25 mm Loops right/left Load capacity: 5 t Djdpfx Aaegzpw Ijgskw 6 pieces available 31125ä

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Travels (X / Y / Z): 350 × 250 × 256 mm U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Table Size: 620 × 400 mm Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Control System: AgieVision (ergonomic, touch display, 3D graphics) Dksdpfx Aext Hz Seagew Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Machine Weight: approx. 3500–4000 kg

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, machine/vehicle number: 50163, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the bidder to collect the machine within the designated timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis: 300 mm MACHINE DETAILS Electrical Data Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 80 A Connection: 12 kVA Tank dimensions (L x W x H): 900 x 500 x 600 mm Dodpfx Aasxqp R Djgjkw Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,500 mm Weight: 4,000 kg EQUIPMENT Documentation

Condition: used, Year of construction: 1989, serial number L169 Dkedpfx Aasvu Hl Regow output 6 kw ja seperat digital readout ja Wizard Puls50 Kühlwasseraufbereitungsei

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Machine weight 4400 kg Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM Dkedjxn Uyxopfx Aagew

Condition: used, offer consists of: 2x Hohner 48/5 S stitching heads suitable for any kind of booklet maker / saddle stitcher We can also organize the following for you: Dodpsxrz Ttefx Aagokw packaging, loading, transport ( by ship or plane) including customs

Condition: used, für Draht hydraulically tiltable ja 2 t Year unbekannt Hydraulik +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Dkedpfxjh Tafxj Aagow

Condition: used, Year of construction: 1979, weight 200 kg 931855500 Dodpfx Asvu Hldjagjkw

Condition: used, Year of construction: 1974, wire dia. 5 - 17 mm wire length max. 5.000 mm straightening feed stufenlos bis ca. 60 m/min 11 kW, 380 V, 50 Hz 45 kW, 1480 U/min; 380 V, 50 Hz total wight ca. 15 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dksdpfx Ashtbfieagjw Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++