Used Wmw Bs 25 for sale (452)

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Dcsdpfx Aksy Rgl Us Tsk Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Dodpstx E N Tjfx Ak Tsck Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Dcodpjy Hk T Ijfx Ak Tjk

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with drawing cushion - Pressing force: 2500 kN - Installation height: 800 mm Dcsdpfx Akjycl Eve Tjk - Stroke: 500 mm - Speed: downwards 200 mm/s - Drawing cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm - new control system, new control cabinet, light curtain (single stroke, double stroke, safety), new hydraulics, - new seals - new UVV safety inspection

Condition: used, Year of construction: 1965, faceplate diameter 5300 mm swing diameter 6300 mm turning height 2800 mm slide adjustment 1700 mm table load 50 t turning speeds 0,3-14 U/min Feed 0,056-10 mm/U digital readout Sony Rest 2 total power requirement 120 kW weight of the machine ca. 187 t No:11670009-05rer Dsdpeyqt R Aofx Ak Tsck The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Dcjdpeyba Rwjfx Ak Tjk

Year of construction: 1986, condition: good (used), Radial drilling machine, WMW Heckert, from a company liquidation. Model BR 40/2x1250 Year of manufacture: 1986 MK 5 spindle Spindle stroke: 355 mm Overhang: 300-1250 mm Variable speeds from 20-1200 rpm 3 gear ranges – pole-changeable motor Tachometer Threading function Automatic feed: 0.063 – 0.1 – 0.16 – 0.25 – 0.4 – 0.63 Dcedpfofnh T Tsx Ak Tsk Coolant pump Work light Distance spindle to base plate: 280-1380 mm Motorized height adjustment Electric clamping With clamping cube Motor power: 3.5 kW Weight: 3 tons Space requirement: approximately 2760x2030x900

Condition: good (used), Year of construction: 1985, machine/vehicle number: 1076-85, Offer 24303 Technical data: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y (transverse) approx. 220 mm - Z (vertical) approx. 400 mm - max. distance milling spindle - table surface 400 mm - Tool holder SK 40 - Work spindle speeds adjustable in 16 steps 45 - 2240 rpm Dcsdot Dxwgopfx Ak Tok - Mot table feeds X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axes digital readout HEIDENHAIN - Vertical milling head tiltable - Horizontal spindle counter holder - Machine vice

Condition: used, The Modul KF 250 HSC bevel gear milling machine was designed as a universal machine for flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of bevel gears. Technical data: Dcsdpoxz Eg Aofx Ak Tsk Gear diameter: 300 mm Max. module: 10 Tooth width: 60 mm Space required approx.: 4.2 x 2.6 x 2.2 m Machine weight approx.: 11,000 kg *The image shows the machine in its current condition as a used machine. Upon request, it can be offered partially modernised or as a complete retrofit, fully modernised with new CNC control (SIEMENS ONE).

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 81019 01, grinding depth: 500 mm, grinding diameter: 800 mm, grinding spindle speed: 250 rpm, workpiece diameter (max.): 800 mm, pivoting range: 15 °, Machine in special design with increased grinding diameter and extended, hydraulic cross travel! Reconstructed and modernized in 1995 at the manufacturer's plant in Glauchau and commissioned in 1996. TECHNICAL DETAILS Working area and grinding diameter Internal grinding diameter: 30–630 mm Extended internal grinding diameter max.: 800 mm External grinding diameter max.: 800 mm Workpiece diameter max.: 800 mm Grinding area and table movement Grinding depth: approx. 500 mm Table stroke: 800 mm Grinding diameter with workpiece protection max.: 800 mm Grinding diameter without workpiece protection: approx. 850 mm Distances and adjustments Dedpfozqcvtsx Ak Tock Distance workpiece spindle head – grinding spindle carrier: max. 1,225 mm Adjustment of the internal grinding attachment on the table: max. 545 mm Cross travel of the workpiece spindle stock: max. 650 mm Swiveling of the workpiece spindle stock: max. 15° Workpiece spindle Workpiece spindle speeds: 16 / 22 / 32 / 45 / 63 / 90 / 125 / 180 / 250 rpm Workpiece weight: max. 1,000 kg Spindle head: DIN 55021, size 11 MACHINE DETAILS Control and position display Control type: conventional Cross travel: via geared motor and positioning device Digital position display: HEIDENHAIN, 2 axes Coolant system Coolant system: with magnetic separator Machine weight: approx. 6.4 t EQUIPMENT Coolant system with magnetic separator Fixing devices or machine feet Various grinding wheels Diamond dressing tool Large grinding plate Internal and surface grinding attachment Halogen machine lamp Machine documentation

Condition: used, functionality: limited functionality, Year of construction: 1982, Maximum Cutting Thickness: 16 mm (approx. 5/8") for mild steel. Maximum Cutting Width: 3150 mm (approx. 10.3 feet). Total Machine Weight: Approximately 24,000 kg (24 tons). Cutting Angle: Fixed at 2°. Drive Type: Mechanical drive with a robust, rigid frame construction. Dsdpsykl Nkefx Ak Tjck Hold-down System: Typically features hydraulic hold-downs to secure uneven sheets during the cutting process.

Condition: used, Type BF 63 Spindle mount: 4MT Spindle diameter: 63 mm Spindle speed: 8–1400 rpm Table size: 900 x 710 mm Drilling travel: 560 mm Table load capacity: 2000 kg Dodpowrpy Rofx Ak Tsck Rotary table: 360 degrees

Condition: good (used), Manufacturer: WMW VEB Type: FW 200×630 x-y-z travel: 380 – 140 – 230 mm Dedpfxjik Hcuj Ak Teck Table size: 200x630mm

Condition: used, GEWINDEROLLMASCHINEN Dedoig Txmepfx Ak Tock VEB WMW GWR 80GR WITH A LOT OF TOOLS

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Dedpfx Akszrxr To Teck Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 - Throat depth [mm]: 315 - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Dsdpfx Akjq Ui Hqo Tjck Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, spindle speed (max.): 24,000 rpm, Order no. 5.3-745 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 CNC control Sinumerik 840D NC rotary table B-axis Magazine for 80 tools Pallet changing device, 2 pallets 400mm x 400mm Internal coolant supply IKZ chip conveyor Coolant device CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 80 tools pallet changing device, 2 pallets 400 mm x 400mm coolant through spindle device IKZ chip conveyor coolant device Technische Daten / technical details: X-travel longitudinal 650 mm Y-travel vertical 650 mm Z-travel cross / Z-travel cross 680 mm B-axis / B-axis 360 ° Spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 24000 Upm /rpm Werkzeugplätze / tool places in changer 80 Gewicht der Maschine ca. / weight approx. 13000 kg Technical data, accessories and description of the machine are not binding - Djdpfxsrairwj Ak Teck Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), WMW Pillar Drilling Machine IIK 20 -Drilling capacity: 20 mm -Spindle speeds: 95 / 150 / 190 / 300 / 380 / 600 / 760 / 1200 rpm -Number of speeds: 8 -Gear shifting via 2 shift levers (A/B) -Manual feed -Right/left rotation -Coolant system -Machine light Dodpfxsztfdfo Ak Teck -Height-adjustable and swiveling drilling table with T-slots -Solid cast iron construction -Three-phase motor Dimensions: L x W x H 0.9 x 0.8 x 1.7 meters / Weight 420 kg

Condition: used, ZERBST DP/S3 cnc Heavy Duty Lathe Manufacturer: ZERBST (Germany) Year: 1991 Machine Type: Heavy Duty Facing & Centre Lathe simens control Dcedpfxoztff Ne Ak Tjk Maximum Turning Diameter: Ø1,600 mm Distance Between Centres: 4,700 mm Spindle Bore: 110 mm Main Motor Power: 55 kW Spindle Speed: 3.5 – 450 rpm Bed Design: Triple guideway cast iron bed Control : Siemens Tailstock: Powered tailstock Thread Cutting: Yes Maximum Workpiece Weight: Up to 12,500 k

Condition: like new (used), Year of construction: 1989, Sheet stamping press ERFURT PE2-H-315 ES Manufacturer: ERFURT Made in: Germany Djdpfsyir Uksx Ak Tjck Specification: Max slide-block force over distance to bottom dead center 12.5 mm: 3150 kN Slide-block force over distance to bottom dead center 160 mm: 1100 kN Idle stroke amount: 25 mm Slide-block stroke: 500 mm Min closed die height: 680 mm Max closed die height: 1000 mm Moving table dimensions: 2800x1500 mm Die cushion: -Max stroke: 160 mm -Adjustable stroke: 160 mm -Max double-acting force: 630 kN -Max ejector force: 630 kN Main motor power: 45 kW Height above floor level: 7100 mm Press weight: 71.3 tons

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Dcsdpfx Ajvbcxtek Tsk Main motor 41kw Movie available

Condition: ready for operation (used), Facing lathe DP 2000 Dcjdpsv Hx R Njfx Ak Tsk Chuck diameter 2000 mm Length 3500 mm weight approx. 22 tons

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Dedpsxln Iwofx Ak Teck Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm max. module 4 (8) min. module 1 clamping length max. 850 mm Dsdpfx Akszmapis Teck weight of the machine ca. 3,1 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which Dedpfewx R Rdex Ak Teck move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.