Used Wmw Bt 2 for sale (483)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. Gkedpfxsyvt H Aj Ap Doc - Cross slide refurbished in 2024. - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m Gjdpfx Apov Rgwxj Dskc

Condition: good (used), total length: 3,620 mm, total width: 2,025 mm, plate height: 350 mm, Manufacturer: UNION Type: Cast iron Year of construction: 2000 Specifications Metric US Standard Length 3620 mm Width 2125 mm Height 350 mm Number of T-slots 7 T-slot spacing / pitch 300 mm T-slot size 34 mm Weight per plate approx. 5200 kg Gkodswp Hn Topfx Ap Djc Number of matching pieces 5 Dimensions (Estimate) Length 3619 mm Width 2025 mm Height 350 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute a representation or contractual terms. We recommend you verify all important details.

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Number of teeth: 176 Z Gjdpfjw Auu Ijx Ap Djkc -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Number: 7x saw blades available -Price: per piece -Weight: 10.4 kg/piece

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min Gkjdpexuhzcsfx Ap Dsc - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: good (used), Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine, milling machine-horizontal -Manufacturer: WMW, counter bearing from milling machine -Dimensions: see drawing in the photos -Dimensions: 295/76/H125 mm -Weight: 6.5 kg Gksdpfx Apexfhvbe Dsc

Condition: good (used), Offer 26013 Technical data: - Length approx. 1500 mm - Width approx. 1000 mm - Thickness of top plate approx. 50 mm - Plate thickness incl. ribbing approx. 200 mm - Table height approx. 870 / 900 mm Gjdpfxjyi Ahne Ap Dskc - Table frame/base - Total weight approx. 550 kg

Condition: excellent (used), max. workpiece diameter 400 mm threading length 1000 mm Godszmapispfx Ap Djkc max. module 4 (8) min. module 1 clamping length max. 850 mm weight of the machine ca. 3,1 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm Gkedpfx Aoztrvnop Djc groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm - Changeover time: 35 sec. * Travel ranges - Workpiece (x): 1140 mm - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 Gkjdpjz H Tqdefx Ap Doc The machine was only used in production until February 2011!!! 3. Warranty: none 4. Prices: * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock

Condition: good (used), functionality: fully functional, Facing and centering machine FZWD 160. Gjdpfxez E Aw Do Ap Dekc

Condition: good (used), functionality: fully functional, 1 x Thread drilling machine WMW Gkjdpfx Apozk I Ale Dec GI4/1 with coolant system The machine can be inspected while it is powered on.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW Gjdpozn H Rvefx Ap Dekc - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg

Year of construction: 1994, condition: ready for operation (used), A total of four WMW/Werkö saw grinding machines are available. Saw blade diameter min./max.: 250mm/1450mm, grinding wheel diameter: 250mm, speed: 2500rpm, tooth pitch: 42mm, grinding spindle swivel range: +/-45°, machine dimensions X/Y/Z: approx. 850mm/1000mm/1800mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible. Gsdpfsv Exthex Ap Dokc

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder Godsvcxhgepfx Ap Dekc -Milling holder: SK50 holder -Type: 50 x 50 x 630 mm -Dimensions: Ø 100 x 850 mm -Weight: 23.5 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm -Height: 140 mm -Groove: 14 mm -Dimensions: 615/540 / H150 mm Gksdjg Rczfspfx Ap Djc -Weight: 83 kg

Condition: good (used), Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe Gedpfx Apsha Hvvs Dokc -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Condition: used, Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable Gkjdpfx Apsgxcuqe Doc -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Condition: good (used), Drill press, drill press, stand drill, pillar drill -Manufacturer: WMW, column drilling machine type CM 10S/55 -Motor: 630 W -Speeds: 460 - 2190 rpm -Translation: via V-belt -Table size: 220 x 280 mm -spindle taper: MK1 Gksdpfefunydox Ap Dec -Spindle stroke: 70 mm -Projection: 200 mm -Pillar Ø: 85 mm -Dimensions: 400/800/H1670 mm -Weight 206 kg

Condition: good (used), Year of construction: 1983, Machine number: 316204/22 Type / Model: FSS 315/E Travel ranges x-y-z: 850 – 280 – 355 mm Godpfxefli Afs Ap Dekc Table: 1,200 x 370 mm Clamping area: 1,060 x 260 mm Speed range: 28 to 1,400 rpm Spindle mount: SK 50 Quill stroke: 80 mm Feeds for x and y axes: 16 to 800 mm/min Feed for z axis: 5 to 250 mm/min Power: 8 kW Accessories/Equipment: Head swivels Condition: good Weight: 4 t Dimensions: 2,000 x 2,000 x 2,400 mm

Condition: used, Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm Godpfx Asfc R D Ijp Dekc -Weight: 15.8 kg

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 8,5 kW Gksdpjd R Szujfx Ap Doc weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm Gkedpfju A I Elex Ap Djc - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Gkedpfx Asqy E I Rop Djc

Condition: excellent (used), Drilling machine WMW Gjdpfxjpbccaj Ap Djkc s10 In very good condition.