Used Wobble Riveting for sale (114)

Condition: new, Year of construction: 2025, Pneumatic radial riveting machine RMU-12-C is designed for forming caps in solid steel rivets d=2...12 mm and in tubular steel rivets d=4x1...14x1 mm. Technical data: 1. Diameter of solid steel rivets - 2...12 mm. 2. Diameter of tubular steel rivets - 4...14 mm. 3. Motion of riveting head - 20 mm. 4. Time of unriveting for one rivet - 1...10 sec. 5. Motor power - 0,75 kW. 6. Voltage - 220/380 V 50 Hz. 7. Working pressure - 3...6 Bar. 8. Weight - 100...120 kg. This riveting machine can be used for movable and immovable riveted connections. Hedpfx Ahjfvztuo Sjnt The cost of the riveting machine does not include the cost of punches and shipping costs.

Condition: good (used), functionality: fully functional, For sale is a robust Bohm & Kruse multi-nailing machine, type II 10/600, machine number 6604. This machine is suitable for efficient series production and for simultaneously driving multiple nails, for example in the manufacture of wooden crates, packaging, and similar wooden structures. The nails are automatically fed to the nailing heads via multiple feed tubes. The working height is adjustable. In addition, the machine is equipped with a riveting device. Technical data: Manufacturer: Bohm & Kruse Type: II 10/600 Machine number: 6604 Design: Multi-nailing machine Working width: approx. 600 mm Number of nailing positions: up to 10 Automatic nail feed via feed tubes Nail size: approx. 1.1–1.4 mm × 25–40 mm Adjustable working height Riveting device available Mechanically adjustable units Hnodpfx Aezxxuush Sst Robust cast iron/steel construction Transport dimensions: approx. 1,600 × 1,600 × 2,400 mm Weight: approx. 900 kg Used, robust industrial machine with signs of wear and tear due to age and use, see photos. Transport is possible for an extra charge! The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. If sold to commercial customers, the warranty will be excluded due to the machine's age. Technical data and equipment may vary. Errors, prior sale and changes reserved. All information without guarantee.

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20I/8324, Offer Number: M20I/8324 Hnedpfxswi Udco Ah Set Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 2-6,35 mm shaft length under head: 70(65) mm cutting length: 87 mm output pieces/min: 360(320) Location: Germany

Year of construction: 2020, condition: ready for operation (used), A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 5) Single-needle high-speed lockstitch machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control: AHE59. 6) Post-bed sewing machine Pfaff 591-900/81-BL. 7) 2x identical swing-arm cutting presses Moneus 1333. 8) 5-thread overlock machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 9) Manually operated riveting and setting machine with mechanical foot operation. 10) Rotary screw compressor Kaeser Aircenter SM 13, year of manufacture: 2020, motor power: 7.5kW, max. operating pressure: 11bar, motor speed: 2955rpm, control: Kaeser SIGMA CONTROL 2. Documentation available. Inspection possible by appointment. Hedpfszt Skxox Ah Sjnt

Condition: used, Oscillating head riveting machine BODMER KÜSNACHT Type FMK 3 Year of manufacture approx. 1980 Riveting shank diameter: max. 10 mm Tool diameter: 12 mm Riveting head stroke: 40 mm Riveting spindle speed: approx. 1400 rpm Motor power: 0.37 kW Power connection: 380 volts, 50 Hz - Riveting pressure adjustment via hydraulic pressure, stepless - Micrometer stop for stroke limitation - Stroke movement via oil hydraulics (max. 45 bar) - Machined flange surface Ø 115 mm with mounting nut on the housing Overall length: approx. 800 mm Hjdpfxoglarlj Ah Ssnt Weight: approx. 40 kg Good condition The riveting head has a multi-spindle head for setting 2 or 3 rivets simultaneously. However, this can be removed and used as a normal head. For normal use, however, the standard oscillating head, which holds the tool, is missing.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M20I/9016, Offer Number: M20I/9016 Machinetype: rivet header Hedjwzknbjpfx Ah Sent Make: Carlo Salvi Type: RF/550/SV Constr. year: 1992 diameter range: 2-5,5 mm shaft length under head: 45 mm max. outside dia. Alu: 6 mm output pieces/min: 450 cutting length: 64 mm Location: Germany

Year of construction: 2017, condition: ready for operation (used), A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible. Hedozfp H Iopfx Ah Sent

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 * for three-axle unit with 385/65 R22.5 tires * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) Hjdpfozz Umxsx Ah Sont * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stanchio

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station Hnjdpfjzgr I Rjx Ah Sot The A220-PD assembly system is a stationary manual assembly station for processing press-fit components. Intended use: The machine is used for press-fitting connecting elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the press-fitting process using a foot switch. The press-fitting process runs automatically. Connecting elements: Press-fit nut, rivet nut, self-piercing nut, press-fit pin, punching pin/rivet pin Thread size: M5, M6, M8, M10, M12 Technical data: Control voltage: 230V/10A Connection plug: HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (B): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type: C-frame A220-PD Continuous sound pressure level (LpA): 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The press-fitting of the connecting elements takes place in automatic mode. Movements are only initiated when the operator presses the foot pedal and thus triggers the press-fitting process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Nietmaschine / Riveting machine Hang 162-01 Baujahr / Year 1993  - SN. 39709 Arbeitstiefe (Ausladung) / Working depth (projection) 620mm Taktzeit / Cycle time 0,7sec Niethub / Rivet stroke 55mm Arbeitshöhe / Working height 1100mm Nietschaftsdurchmesser / Rivet Diameter 2-4mm Antriebsleistung / Drive capacity 0,37 kW Geeignet für Verarbeitung von Halbhohlniete, Vollniete, Hohlniete, Rohrniete, Zweispitzniete, Doppelhohlniete (Zuführung des Nietkäppchens), Nietmaschine für mittlere bis große Serien Suitable for processing semi-tubular rivets, solid rivets, hollow rivets, tubular rivets, two-point rivets, Hedpfxsv D H Hto Ah Sjnt double-tubular rivets (feed of the rivet cap), riveting machine for medium to large series Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Hedpfxsx Nd U De Ah Ssnt

Condition: good (used), Hang 101-50 Eyeletting machine The machine is in perfect condition and ready to use. Hedpjzw N U Ajfx Ah Sent Technical specifications: 1 eyeletting head (Hang 271 rivet, hole diameter approx. 6mm) Maximum capacity: 20 sheets 230V power supply Front and side margins Operation: foot pedal or hand switch. The machine punches and crimps the eyelet in a single pass. Automatic eyelet feeding.

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Hjdpfxjl Smn So Ah Sont Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), Here, we offer you a control unit. Control unit for the RIVSET riveting system. Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Hnedpfx Ahszgaahs Set Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was inspected by the manufacturer and is functional. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Chassis: Ladder frame made of lightweight steel, with continuous crossmembers. Coupling plate, 8 mm thick, with a 2-point kingpin according to DIN 74080 / ISO 337. Suspension: Axle lift mechanism on axle 1, 18330.700, manufacturer optional (Kögel). Three-axle unit, with disc brakes, approximately 430 mm in diameter, approximately 120 mm offset. Air suspension with approximately 180 mm of travel. Vehicle tires: 6x 385/65 R 22.5, 160J (European brand, manufacturer optional - Kögel). Chassis components: Kingpin supports (manufacturer optional - Kögel), mechanical with leveling foot, approximately 24 tons lifting capacity. One-sided operation on the right-hand side when driving. Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011, consisting of 1 pair of quarter-fender mudguards in front of the axles, and 1 pair of quarter-fender mudguards with mud flaps behind the axles. 2 wheel chocks with holder. Pallet box for 24 Euro pallets, completely enclosed, protected against spray water, and also serves as a side protection device. Ground clearance (front) 220 mm. Plastic toolbox, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm. Installed on the left-hand side at the rear. Retractable access ladder at the rear on the right-hand side. High, rigid rear underrun protection made of steel according to ECE-R58. Height of the underrun protection profile min. 120 mm, designed for increased test loads. 1 pair of retractable warning panels for over-width loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection. Arrangement in the front and rear vehicle area. Braking/air suspension system: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting cables), parking brake as spring-loaded brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection. EBS system (manufacturer optional - Kögel). Air suspension system including 1 lifting and lowering valve, mounted on the left-hand side behind the axle unit when driving. Driving height is adjusted automatically. 2 fail-safe coupling heads at the front, ISO 1728. Air tank for brake system and air supply made of steel (EN 286-2). Floor: Plate floor, approximately 30 mm thick. Floor sealed at the rear. Superstructure: WITHOUT quick-release device for front side tarpaulin, with tensioning rods. Quick-release device at the rear for side tarpaulin with tensioning rods and ratchet. Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approximately 27,000 kg. Front wall: Front wall in superstructure height with aluminum corner posts, riveted with aluminum hollow profiles, screwed/riveted to the frame, 1 pair of lashing eyes according to EN 12640. Inside of front wall reinforced with 12 mm plywood with screen-printed surface, approximately 1,250 mm high. Rear wall: Double-wing rear portal door made of aluminum, approximately 2,630 mm i.o.L. 4 integrated twist lock closures (2 pieces on the left, 2 pieces on the right), manufacturer optional - Kögel. Hnjdpfx Ajzqii Heh Sot Bolted corner posts at the rear made of aluminum at portal height. Corner posts on both sides, approximately 500

Condition: used, machine/vehicle number: 003, Number of heating chambers: 5 Chamber size: 140 Ø x 150 mm high Hnedpebn I Tzofx Ah Sot Maximum tested temperature: 1000°C Electrical connection: 400 V, 13 kW Space requirement: 550 x 1600 x 1830 mm Weight: 492 kg

Condition: used, Used special-purpose plant, built by ECKOLD (Special machine with superstructure for punch rivet brackets) Hjdszvhg Ijpfx Ah Ssnt Custom-built as a component feeder. Pictures of the components and motors. Motor brand: Behncke, 5.5 kW Rated power: 8.5 kW Hydraulic unit brand: FluTec, year 1999

Condition: excellent (used), Year of construction: 2007, operating hours: 10 h, machine/vehicle number: 103414, High-performance automatic production line for ring binders. Sheet feeder (vacuum feeder), creasing station, gripping hole punching unit (finger hole eyeletting machine), double riveting station, operator control panel (Fanuc QuickPanel View), mechanical feeding unit, single riveting station, folding station. Cover height: 120 – 400 mm; cover width: 300 – 820 mm; material thickness: min. 1 mm – max. 3.5 mm; rivet spacing: 90 – 300 mm. Hnodpfx Ahox Apb Hs Sot

Condition: excellent (used), Here we offer you an FRT MicroSpy Mobile. Device designation: FRT MicroSpy Mobile, Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable optical profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements to be performed "on-site" to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts. Excellent resolution values. Excellent reproducibility. Non-destructive measurement. Handles and adjustable support feet. Low weight (approx. 5 kg). FRT Technical Specifications: Device: MicroSpy Mobile xy-travel 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical cross-roller guide Drive: DC motor with ball screw Travel (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3 mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height variation (per axis): < 2 µm / 50 mm (of which not reproducible): < 0.5 µm Right angle XY: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel Position measuring system Measuring system resolution Axis wobble Coarse adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point distance xy: 1 µm Sample size: - Sample weight: - Min. measurement speed: 1 µm / sec Max. measurement speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring system: approx. 5 kg Footprint measuring system: approx. 0.3 x 0.3 m² Dimensions control unit (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Power supply EU version: 110 - 240V, 50 - 60Hz, 16A Power supply US version: 110 - 240V, 50 - 60Hz, 16A Power consumption: typically 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door Hnsdpfx Ajzdnqcoh Set 1 x Power cable for cold devices 1 x Mouse (PS/2) 1 x Keyboard 1 x Monitor 19'' TFT Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Cordless riveting tool, blind rivet gun, blind rivets -Transfer in current condition as seen -The device works, the batteries are defective Hsdpfxjdz Ul Ij Ah Sjnt -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, UNITECH designs and manufactures pneumohydraulic presses with nominal pressing forces from 10 to 600 kN, available in C-frame, two-column (two-post) and four-column (four-post) designs. The advertised price of EUR 4,000 net (excluding VAT) applies exclusively to the basic 10 kN model. All other press models and equipment configurations are quoted individually according to the required pressing force, frame design, stroke lengths, working area, control system and safety equipment. This listing covers the complete UNITECH range of new pneumohydraulic presses for industrial assembly and production applications. Each press can be configured to suit the workpiece, tooling and intended manufacturing process. TECHNICAL RANGE Nominal pressing forces: – 10, 30, 50, 100, 150, 200, 300, 400 and 600 kN Available frame designs: – C-frame – Two-column (two-post) – Four-column (four-post) Stroke ranges: – Power stroke: 5–20 mm – Total ram stroke: 50–250 mm The available combinations of pressing force, frame design and stroke lengths depend on the selected configuration and application. OPERATING PRINCIPLE The pneumohydraulic drive combines a fast pneumatic approach stroke with a short, hydraulically intensified power stroke. The full pressing force is generated only during the working phase of the cycle, providing an efficient solution for industrial pressing and assembly operations. TYPICAL APPLICATIONS Subject to the selected configuration, tooling and process-specific risk assessment, the presses can be used for: – Press-fitting and component assembly – Inserting bearings and bushings – Riveting and crimping – Punching and marking – Bending and forming – Straightening and calibration CUSTOM CONFIGURATION The following parameters and equipment can be adapted to the intended application: – Nominal pressing force – Frame design – Working area and installation dimensions – Power stroke and total ram stroke – Tool and workpiece mounting – Control system and operating sequence – Application-specific guards and safety equipment – Integration with production lines and auxiliary equipment DOCUMENTATION, ACCEPTANCE AND DELIVERY Complete machines are supplied with CE marking, an EU Declaration of Conformity and operating instructions in the agreed language: Polish, English or German. A Factory Acceptance Test (FAT) is carried out prior to dispatch. The presses are covered by a 12-month warranty. Standard delivery terms are FCA UNITECH, Zawiercie, Poland (Incoterms 2020). REQUEST FOR QUOTATION To receive a technical proposal and quotation, please provide: – Required pressing force – Preferred frame design – Workpiece and tooling dimensions – Required working height and working area – Required power stroke and total ram stroke – Description of the manufacturing process – Required control and safety equipment Hnedjv Snixjpfx Ah Sot – Expected cycle time or production rate The photographs show examples of UNITECH press configurations and may include optional equipment. The final technical specification, price and delivery time depend on the selected configuration.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 360 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, number of axes: 3, This 3-axis CHIRON FZ 12 KW vertical machining center was manufactured in 2012. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. The machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Two Chiron units in combination with two x Fanuc M - 20iA (2011) Machine Benefits Technical Machine Benefits • Controlled axes: 6 axes Hnsdpfozvyaasx Ah Sst • Reach: 704 mm • Acceleration/deceleration: 0 to 12000 min-1 in 0. 6 seconds • Clamping surface: 820 x 440 mm² • Drilling capacity in st 60: Ø 16 mm • Tapping: m 16 • Milling capacity in st 60: 80 cm³/min • Acceleration: x & y axis 0. 7 g, z axis 1. 0 g Extra Information Movement Axis Movement Range and Speed: J1: 340°/360° (option) at 350°/s J2: 200° at 350°/s J3: 388° at 400°/s J4: 380° at 450°/s J5: 240° at 450°/s J6: 720° at 720°/s Allowable Load Moment: J4 & J5: 11.9 Nm J6: 6.7 Nm Repeatability: +/- 0.02 mm Maximum Speed J1: 195°/s J2: 175°/s J3: 180°/s J4 & J5: 400°/s J6: 600°/s Allowable Load Moment J4 & J5: 7.7 Nm J6: 9.8 Nm Tools Automatic Tool Changer: Tool Pockets: 24 Tool Change Time: approx. 0.9 s Chip-to-Chip Time: approx. 2.4 s The workpieces are supplied via an automated feeding system and sequentially loaded into the Chiron machining centres by two Fanuc industrial robots. Depending on the process specifications, these are either palletised automatically or further processed in a downstream step, for example by riveting. The entire system operates fully automatically.

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Hodpfjzvgkxex Ah Sjnt Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 05/2027, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Regular ladder frame in lightweight steel construction with continuous crossmembers * With extended chassis frame * Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337 * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120 * Air suspension with approx. 180 mm travel Tires: * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5 UNIROYAL TH 506, steel rims 22.5 x 11.75, offset approx. 120 mm * Chassis components: * Mechanical landing gear with leveling foot, approx. 24 t lifting capacity, single-sided operation on the right side * Storage box for: 10 side panels, folding stakes, and rear flap, completely enclosed, protected against spray water, and simultaneously serving as lateral protection Hedjy Trwuspfx Ah Sent * 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right Braking / Air Suspension System: * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connector ISO 7638 (without connecting lines) * Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit * Driving position is automatically adjusted * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for braking system and air reserve made of steel (EN 286-2) Floor: * Plate floor approx. 30 mm thick, multiple-ply glued plywood * Floor sealed around the perimeter * Pocket for square tube inserts approx. 80 x 80 mm Front wall: * Storage for max. 14 square tube inserts approx. 80 x 80 (length 1,990 mm) on the inside of the front wall * Approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * N o t e: When using the front wall for securing the load, suitable lashing straps must be used for tensioning if the vehicle is operated without side panels and a rear flap Rear wall: * ATTENTION: Hinge mount for folding rear wall 600 mm as well as stake mount for folding corner stakes at the rear, however, the folding rear wall and corner stakes at the rear are OMITTED. Side wall: * VarioFix steel outer frame, 4 pairs of stake mounts for folding stakes on the outer frame (evenly distributed), WITHOUT folding stakes, pair of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring. Side panels: * ATTENTION: Hinge mount for 5 pairs of side panels on the outer frame as well as side panel stop mounted on the corner posts at the front, however, the 5 pairs of side panels are OMITTED. Electrical system / Electronics: * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights * 2 LED outline lights with pendulum bracket * 2 multi-chamber tail lights *

Condition: good (used), Hello, Hjdpfx Ajv I E Scsh Sont -The subject of sale is. -Hang 87D 3P double-head riveter. -Manufacturer: Hang Germany. -Good condition. -The machine is used to rivet eyelets. -Two riveting heads, with adjustable spacing. -Cardboard thickness 0.2-4mm -Weight 570kg -380V power supply -Possible transport by freight forwarder (individual valuation)