Used Wood Drying Kiln for sale (17,687)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ Iajdefzb Niopfx Adwol 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Iodpfjxyqncex Adwsal

Year of construction: 2004, condition: ready for operation (used), General Data Machine weight 6000 kg Main Drive Number of axis 3 Spindle Speed 6000 RPM This 3-axis Colombo AM33/AF CNC Wood Machining Centre was manufactured in 2004. It features two tenoning spindles at 6000 rpm and two profiling spindles, enhancing its versatility. The machine includes an electronic fence, height, and feed speed adjustments, and comes with tooling for various window profiles. Consider the opportunity to buy this Colombo AM33/AF CNC Wood Machining Centre. Contact us for more information about this machine. Iasdpfx Aox R E Injdwsl Application Types CNC Wood Machining

Condition: used, Year of construction: 1973, Weight 3 t x-travel 1000 mm Ijdpfx Aowzyt Tedweal 110 milling-head swivable +/- ja

Year of construction: 2020, operating hours: 1,050 h, condition: used, Serial number: 2292xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21978 Specifications: Iajdpfx Adox Dg Utowel 2020 model Hours: approx. 1050 Chassis (see photos) Remote control Shaft set for concrete and wood Includes equipment for installing a magnetic belt AdBlue is disconnected Delivery by agreement Description:2020 Arjes Evo waste shredder.One shaft set for wood and one for concrete.See video.Delivery by agreement. Hours: 1050 Own weight: 11 Model: Evo Avfallskvern. For betong og treverk! SE VIDEO.

Condition: like new (used), engine power 18.5 kW Isdpfjx Uqubsx Adwsal hydraulic pressure drawer 15 mm screen year of manufacture 1994

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL DATA - Feed opening width: 720 mm - Feed opening height: 160 mm - Thickness of material to be shredded: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Entry pressure feed roller: 0.75 kW - Bottom gear-driven feed roller: 1.8 kW - Top gear-driven feed roller: 1.8 kW Iasdpfx Adex Rc R Hewsl - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German-made – Very low hours of use – Original documentation - Autoreverse (adjustable) – Used shredder, in very good / excellent condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), axle configuration: 3 axles, first registration: 07/1997, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, suspension: air, color: brown, Year of construction: 1997, Equipment: tail-lift, Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 8.990 kg Carrying capacity: 30.010 kg Isdox Tpiujpfx Adwsal GVW: 39.000 kg Functional Tail lift: DHOLLANDIA DHSMR, slider lift, 2000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: new, Year of construction: 2025, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Ijdswymwcepfx Adwjal Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 400V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 400 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg

Condition: used, Drying Oven Seho GoReflow 1.8. 23101297679 unused 2023 price: €27,842 23101297680 unused 2023 price: €27,842 Iaedpsx Tg Rcefx Adwel 22081297330 used 2022 price: €14,182 17121296474 used 2017 price: €3,775

Year of construction: 2009, condition: ready for operation (used), Additional Equipment Second-hand shrink-foil packaging line Through-feed fully automatic shrink foil packing line: loading belt /wrapping station for 3 foil rollers /shrinking tunnel /outfeeding conveyor This ERREGI LINE ERREGI was manufactured in 2009. It features a fully automatic shrink-foil packaging line, including a loading belt, wrapping station for three foil rollers, shrinking tunnel, and an outfeeding conveyor. Consider the opportunity to buy this ERREGI LINE ERREGI woodworking machine. Contact us for more information. Ijdpfx Adex R E Sgoweal Application Types Other Woodworking Machinery

Condition: used, Year of construction: 2016, Serial number: Serienr Bruks: 8060048,Serienr cmt:23008, Serienr palfinger: 151xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21792 Specifications: 2016 model 3135 hours Weight: 16000 kg Max diameter: 50 cm Good capacity Engine: scania dc13 385A Eu stage IV 368 kW 500 hp 2 full length knives Service taken care of by owner Timber crane Slewing ring Knives Counterknife Reach 20 mp crane Timber clip Support leg CMT hook frame Delivery by appointment Iedpfx Aexwkmaodwjal   Description: We have a 2016 Bruks 806st Bio wood grinder w/ cmt hook frame and epsilon palfinger m120l97 t mmer Crane for sale. It has good capacity and can chop logs up to 50 cm in diameter. Services have been taken by the owner himself. Everything should work as it should according to the owner. Delivery by arrangement. Own weight: 16000 Model: 806st Bio tre kverner m/ Epsilon palfinger m120l97 tømmerkrane

Year of construction: 2009, condition: good (used), Drying oven, drying cabinet, electrode oven, chamber dryer oven, preheating oven, electrode re-drying, electrode cabinet, electrode dryer, welding powder dryer, welding electrode stabilizing oven -Manufacturer: Gullco, Drying oven electrode dryer welding powder dryer type 125-220 -Nominal temperature: up to 38° - 288°C Iasdpfxex Sw N He Adwjl -Usable space: WDH 250/480/200 mm -Voltage: 220 V -Power: 1000 W -Dimensions: 385/365/H695 mm -Weight: 24.4 kg

Year of construction: 2003, condition: used, wood chip sieve Ijdox Ta Nfspfx Adwoal

Year of construction: 2025, condition: new, Professional Grinding Table for Wood and Metal A filtration device that works well in any environment where grinding operations take place. THE TABLE IS EQUIPPED WITH 2 FANS ON THE RIGHT AND LEFT SIDES. The table features an independent dual filtration system, ensuring the air is thoroughly cleaned of all contaminants! A special high-efficiency radial fan guarantees long operation without the need for frequent replacement of filtration materials. The eleven-segment worktable makes it easier to position the workpiece and clean the filters. Quick and easy filter replacement. Ventilation system located at the bottom and the side of the table. Separation of "large" and "small" grinding waste. Heat-resistant filter (not fireproof). Spacious metal drawer on the right and left sides of the table. Ijdjvugxwspfx Adwsal High vacuum (dust filtration efficiency > 99.9%). Technical Parameters: Worktop dimensions: 2060 x 530 mm Motor power: 2 x 1 kW Airflow capacity: 2 x 4000 m³/h Filter dimensions: 493 x 395 x 20 mm Voltage: 230V Overall dimensions: 2160 x 600 x 870 mm Weight: 120 kg Note: The price quoted is the net price. It does not include transportation costs.

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open Iodpfsu Szfusx Adwsal *

Condition: used, Year of construction: 2017, Serial number: 561706xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21791 Specifications: 2017 model 1646 Hours Weight 2000 kg Iaedpfx Adjxwkmgewel Takes logs up to 19 cm About 50 hp Kubota engine 18.5 kW Raise and lower Function Ready for delivery   Description. Jensen A540 spider wood chipper works as it should according to the owner. It has a raise and lower function that allows you to maneuver smoothly in the terrain. It takes logs up to 19 cm in diameter. The machine is ready for delivery. Own weight: 2000 Model: A540 spider flishogger m/hydraulisk hev og senk funksjon

Condition: new, Year of construction: 2025, Professional Table for Sanding Wood and Metal. A filtration device that is suitable for use wherever sanding operations are performed. RADIANT FAN, HIGHER VACUUM PRESSURE. Our equipment is installed in carpentry workshops, furniture workshops, and industrial paint shops. Designed for sanding wood and metal. The table is equipped with an independent dual filtration system, ensuring precise air purification from all contaminants! A special high-efficiency radial fan guarantees long operation without the need to change the filtration materials. The five-segment work table makes it easier to position workpieces and clean the filters. Iaodpfx Adev R Tihswel Quick and easy filter replacement. The table is equipped with pins and clamps for mounting workpieces. Ventilation system at the bottom and on the side of the table. Filter resistant to high temperatures, but not fireproof. Segregation of "large" and "small" sanding waste. Spacious metal drawer. High vacuum pressure (dust filtration efficiency > 99.9%). Technical Specifications: Work surface dimensions: 1000 x 550 mm Working height: 850 mm Airflow capacity: 4000 m³/h Filter size: 2 x (395 x 495 x 24 mm) Motor power (S1): 1.0 kW Voltage: 230V Weight: 70 kg Dimensions: 1050 x 600 x 850 mm

Year of construction: 2017, condition: used, Serial number: 17090xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22089 Description: We have a 2017 Magsi Rateau wood gripper w/s70 mount for sale. Everything works as it should, according to the owner. Ready for delivery Model: Rateau wood griper m/s70 feste Iodpfxox I U Uxo Adwsal

Condition: new, Year of construction: 2025, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 230V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 230 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg Iaedjridpaopfx Adwsl

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Digital Signal Processing Digital signal processing. A plotter with a working area of 1220x1230 ensures smooth operation of the device and accuracy in processing. The memory built into the controller allows the machine to work without the need to load the program each time. very quiet operation and guaranteeing increased durability. The Premium version meets the expectations of individualists as well as companies with a lot of orders. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 3.7kW / 18000 rpm. inverter, air-cooled Isdpeiz Avvofx Adwsal Workspace 1230x1220x210mm Control DSP Software resolution 0.001mm Power 400V Weight 450kg Machine dimensions 2000x1800x1640mm Table height 715mm Guides linear Transfer toothed rack (Z axis - ball screw) ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Equipment Leveling Feet, snake, clamps, screws, keys, 2 boxes of cutters, 1/8, 1/2 and 5-6 mm collets The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2025, PROFESSIONAL WOOD SPLITTER 16 TONS. The robust construction and high-quality wedge guarantees a long service life and trouble-free operation. Iedpeuqiq Dsfx Adwoal The machine is designed for splitting wood up to approx. 700 mm in diameter! Its stable, robust construction ensures excellent working results. Machine description The splitter is equipped with an overload valve that drains oil into the tank and a powerful, trouble-free gear pump. The tree lift system makes it easy to place heavy materials directly under the splitting wedge 5-bolt power connection Angled wedge makes it easier for the wedge to sink into the material. FAULTLESS HYDRAULIC PUMP! Technical specifications Thrust force 16 TON Minimum wood diameter 80 mm Maximum wood diameter 700 mm Minimum timber length 350 mm Maximum length of wood 1100 mm Splitting speed (continuously adjustable) 4.6 - 14.2 cm/sec. Return speed 6.2 cm/sec. Wedge stroke length 948 mm Motor power 4,5 kW Voltage 400 V Hydraulic tank capacity 18 l Hydraulic pressure 27.7 MPa Dimensions 1050 x 1550 x 2500 mm Weight approx. 259 kg

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Iedpfx Adjg Ngixoweal Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXES. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Efficient and precise CNC CORMAK C1325 milling plotter, has a structure made of steel and cast iron, which provides it with adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood or PVC, plexiglass, dibond. Dissecting table with four independent vacuum sections with dimensions of 1300x2500 mm. For each machine, training is included in the price at our headquarters! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1080 kg Machine dimensions 2100 x 3100 x 2200mm Table height 715mm Vacuum pump 5.5kW (included) Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h Highest class security barriers: Optionally available highest quality light barriers The safety zone determined by the sensors does not allow you to enter the machine's operating area A set of barriers ensures the operator's safety Iaedpfef Eyqqjx Adwsl Gate height in the Z axis up to 450 mm UCANCAM V11 software(possibility to import files from Corel, Autocad). File import/export, text editor and input Tool set: mills, drills, holders *Unloading and positioning the machine by the customer. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis for 350mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP Control - Digital Data Processing Machine equipped with the function of remembering the last track of the G-code (In the event of a power failure or interruption, it starts working from the last point without losing time and material.) The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2025, PROFESSIONAL 14 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 700 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. The wood splitter is equipped with an overload valve draining oil to the tank and an efficient, failure-free gear pump. Iaodpforidp Eox Adwol Device equipped with side tables The angled wedge makes it easier to sink the wedge into the material. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3.5 kW / 400 V Pressure 14 T Max. wood length 1040 mm Wood diameter range approx. 100 - 700 mm External dimensions 1440 x 1350 x 2280 mm Weight 185 kg