Used Woodworking for sale (12,257)

Condition: used, Year of construction: 1977, Sliding carriage: 2500 mm Bwsdpfxo Ahhm Hj Anfow Cutting width: 1000 mm Scoring motor: 4.8 kW Location: Nattheim

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Bwjdpfx Aexy Tmnenfjw

Condition: used, Year of construction: 2002, Extraction system Manufacturer: Schuko Type: Vacumat 160 Year of manufacture: 2002 Technical data - V Nominal flow rate: 1950 m3/h - V min.: 1441 m3/h Bedpfx Ae Ah E Rwonfjww - Motor power: 2.2 kW - Nominal speed: 2850 RPM - Nominal current: 4.6 A - Nominal operating voltage: 400 V - Frequency: 50 Hz - Fan motor: 3-phase 400 V, 2.2 kW, 50 Hz, 2800 RPM Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), CATALOGUE NUMBER: 8138 Technical specifications: - Guide rail length: 2000mm - Cutting length: 1850mm - Automatic lubrication of the cutting system - Damping and tensioning system in the head Bwjdpfx Ane Ahndqsfsw - Manual feed of the guide rail - Electric motor: 11kW - Dimensions for transport (length/width/height): 1800x1100x2700mm - Dimensions for transport (overall): 3900x1100x1900mm - Weight: approximately 300kg ADVANTAGES - Made in Germany - Suitable for cutting packs or roundwood - Mobile, on wheels - Used saw, very good condition Net price: 23,900 PLN Net price: 5,558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to exchange rate fluctuations)

Condition: used, Year of construction: 2016, Edge banding machine with workpiece return Manufacturer: Brandt Type: KDF660 Year of manufacture: 2016 Bsdpfx Anj Ahqtkjfjww Technical specifications: - Joint milling unit - Gluing unit - Pressure zone - Cutting unit - Flush trimming unit - Fine trimming unit - Corner trimming unit - Profile trimming blade - Flat trimming blade - Buffing unit - Workpiece return Note: The technical specifications and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Calibration grinding machine Bwjdo Ahg Rkjpfx Anfsw Manufacturer: Viet Type: S1 213 2200 RKRT Year of manufacture: 2017 Technical data - Grinding width: 1300 mm - 1x Calibration grinding unit - 1x Combination grinding unit - Feed rate: 10 m/min Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Year of construction: 2023, condition: used, Portal vacuum press Manufacturer: Bessler Type: Press Year of manufacture: 2023 Technical data - Dimensions: 4550x2992x1465 mm - Weight: approx. 800 kg - Becker vacuum pump VT 4.25 - Max. press format: 4000x2180x160 mm Bwedpfx As Ahm R Eonfew - Manually adjustable portal Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Assortment of router bits for the professional, machine-based machining of solid timber, wood-based materials and other suitable materials. A wide variety of router bits for grooves, quarter-round, half-round, mouldings, etc. ~ 50 pieces Bwodpfxo Ah Hl Aj Anfjw Technical data: - Blades: Various - Flying circle (ø): Various - Bore: Various - Markings: Various - Length: Various - Material: Steel

Condition: used, Year of construction: 1997, Air supply system Manufacturer: Schuko Type: WZL 89 Year of manufacture: 1997 Technical data - Airflow rate: 8900 m3/h - Heat output: 115 kW - Motor: 2.5 kW - 2 speeds - Heating coil - Air supply filter Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding. Bodpfo Ah E R Njx Anfsww

Condition: used, functionality: unexamined, total length: 260 mm, total width: 360 mm, total height: 210 mm, Ferwood Code: RU0012120 - Manufacturer Code: 6AV2123-2GA03-0AX0 - Condition: Used - Functionality: Not tested - Compatible Machine: HOLZMA panel saw - If interested, we offer a refurbishment service, please contact us. Bwodpo Ah Hrzjfx Anfsw

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Bsdpfjzu Sgpsx Anfjww Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7918 TECHNICAL DATA - max. disc diameter: 450mm - spindle diameter: 30mm - top pneumatic clamping - disc guard - disc guard also functions as a clamping device Bwjdps Af I E Ijfx Anfsw - pneumatic disc extension - cutting height (at a width of 250mm): 120mm - at a smaller height, the width will be larger - main motor: 6kW - diameter of dust extraction port: 120mm - table dimensions (length/width): 650x850mm - table height from the base: 1000mm - roller tables: - infeed roller table + pawl: 3180mm - outfeed roller table + pawl: 2450mm - width of sliding roller: 360mm - operating pressure: 8 bar - overall machine dimensions (without roller tables) (length/width/height): 1300x1050x1800mm - weight: 550kg ADVANTAGES - 2 roller tables - pneumatic disc stroke - used saw, in perfect condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 2017, A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 15000mm/8000mm, weight: approx. 20000kg. Documentation available. On-site inspection is possible. Expected to be available from the end of September 2025. Bwjdpfow Azuzex Anfsw

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Panhans Type: 608/1.8 Year of manufacture: 1982 Machine number: 202 SAWING UNIT Saw blade diameter: 350 mm WORK TABLE Bodpfxe Adu Dme Anfeww Table dimensions: 1,200 × 1,000 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 11.5 A MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,400 mm Width: 1,200 mm Height: 1,500 mm Weight: 500 kg

Condition: used, Year of construction: 1980, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Bwedpfxew D Aybe Anfew

Condition: used, Year of construction: 1995, Window manufacturing line Manufacturer: SCM Type: Method K Year of manufacture: 1995 Technical data Bwsdpj Ahn Ihofx Anfjw Tool configuration: - 1st crosscut saw spindle - 2nd mortise and tenon spindle - 3rd profile spindle - 4th profile spindle - 5th hardware spindle - 6th glass bead separator saw Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Bwjdoy T Hpfspfx Anfow Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), functionality: fully functional, Weinig Powermat 1000 four-sided planer Working width: 230 mm Working height: 160 mm Number of spindles: 8 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW Left: 5.5 kW (power lock) Right: 5.5 kW (power lock) Top: 11 kW (power lock) Bottom: 15 kW Top: 7.5 kW (power lock) Bottom: 7.5 kW All spindles: 8000 rpm Bwjdpfjzt I Sfjx Anfjw Feed speed adjustable via inverter up to 30 m/min Electromotive positioning of working height and width Weinig Power Com system Pneumatic material clamping 2 smooth rollers in the feed table Length of the working table: 1970 mm Drive on cardan shafts

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives for woodworking. Production from a straight blank or regrinding of used knives using a template. Includes a new grinding wheel and a new cooling lubricant pump. Bods Ahm Ixjpfx Anfoww Technical data: - Clamping length: 230 mm - Mandrel ⌀: 40 mm

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 70 t, stroke length: 400 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, cylinder diameter: 70 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Total pressure: 70 t Working pressure: 2 kg/cm² Bwsdpfx Ane Af Hn Hjfow Total stroke: 400 mm Number of working stations: 1 Number of levels: 1 Plate material: Mounted plate Number of cylinders: 6 Cylinder diameter: 70 mm Workpiece length: max. 3,000 mm Workpiece width: max. 1,300 mm Workpiece height: max. 400 mm Heating type: Oil-heated Temperature: max. 120 °C MACHINE DETAILS Main motor power: 2.1 kW Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,100 x 2,050 mm Unladen weight: 4,020 kg Number of transport packages: 1 EQUIPMENT Documentation Heating boiler CE marking CE certificate

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal price extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows 2) IT integration with a post-processor ----- Machine still in operation, available for viewing! ----- Technical Summary (detailed description available upon request!): ----- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) Bjdoy Hl Iyepfx Anfjww - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Bsdpfx Ajytgn Tenfjww

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - track width: 360mm - shaft width: 350mm - max. disc diameter: 350mm - disc bore diameter: 80mm - max. cutting height: 120mm - table dimensions: 2040x1220mm From above: - pawls - toothed feed shaft Bwsdpfx Ane Agur Njfow - pawls - saw shaft - sliding, pressure shaft From below: - rollers in front of the table, 2 pcs - guide - pawls - track - central track lubrication - electric saw shaft lifting - electric body lifting - stepless feed speed adjustment - dust extraction nozzle diameter: 140mm, 160mm - main motor: 30kW - overall dimensions (L/W/H): 2600x2300x1850mm - weight: approx. 4000kg ADVANTAGES – Czech production – used multi-blade saw – very good condition Net price: 30900 PLN Net price: 7190 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Bjdpfexy Tmuox Anfoww

Condition: excellent (used), CATALOGUE NUMBER 8024 TECHNICAL DATA - roller width 640mm - max. thickness of workpiece 210mm – from top to bottom: - pawls - toothed infeed roller, pulling - pressure roller - planing roller - pressure roller - smooth outfeed roller, pulling, metal - 2 adjustable sliding rollers at the bottom - motor approx. 5.5kW - manual table lifting Bwedpoztquvofx Anfow - 2 feed speeds - diameter of dust extraction nozzle 130mm - dimensions L/W/H 1300x1200x1200mm - weight 950kg ADVANTAGES - German made - used thickness planer, very good condition Net price: 8900 PLN Net price: 2070 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)