Used Worm Grinding Machine for sale (84,294)

Condition: ready for operation (used), Year of construction: 2013, total height: 1,900 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: 21i-MB, General Data Measurements width 2400 mm Measurements depth 2000 mm Measurements height 1900 mm Machine weight 6000 kg Control Unit Brand FANUC Model 21i-MB Additional Equipment Kraft & Bauer Fire extinguishing system, Type FB703S-UV3-TFM70°/KLA 6-S-MV / Knoll microfilter, Type Micro Pur 240 F / Streuli lifting station, Type SHSRT300-TL142/180 Kjdpfx Aajx D Nzconenf This TSCHUDIN ecoLine 400 centerless grinding machine was manufactured in 2013. It features a Fanuc 21i-MB control system, a grinding wheel with a max outer diameter of 400 mm, and a regulating wheel with a speed range of 0-265 rpm. Additional attachments include a Kraft & Bauer fire extinguishing system and a Knoll microfilter. Consider the opportunity to buy this TSCHUDIN ecoLine 400 centerless grinding machine. Contact us for more information about this machine. Application Types Grinding

Condition: excellent (used), Year of construction: 2018, max. wheel diameter 360 mm Ksdpex E Dupjfx Aanonf gear width 210 mm max. module 7 min. module 0,5 Control Burri weight of the machine ca. 9,5 t

Condition: good (used), Year of construction: 1970, functionality: fully functional, Rotary Table Surface Grinding Machine Sweeping Type RS 6B Stock No: 14-10-008 Kjdpevtz Ukefx Aanjnf Machine data: Year of construction: approx. 1988 L x W x H: approx. 2700 x 2000 x 2200 mm Weight: approx. 3500 kg Specifications: Grinding range: Diameter: approx. Ø 600 mm Grinding height: approx. 300 mm Magnetic clamping surface: approx. Ø 600 mm Drive power: approx. 15 kW Grinding spindle speed: approx. 1500 rpm Grinding wheels - diameter: approx. Ø 350 mm Accessories: - Segment grinding wheel Price on request

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW Knodpfxob A Hw Ns Aanjf -Grinding discs: 300 x 40 -Operating voltage: 380 volts

Condition: used, Year of construction: 1994, max. wheel diameter 1.800 mm gear width 000 mm control Sinumerik 840 C Knjdpfxev Sants Aanjf profile depth 80 mm grinding wheel diameter 400 mm grinding wheel width 80 diameter of spindle pin 140 mm length of spindle pin 45 mm radial slide travel 1.000 mm tangential adjustment 300 mm axial slide travel 1.000 mm table diameter 1.200 mm table hole 300 mm feed speeds X: 3.000 mm/min feed speeds Y : 5.000 mm/min feed speeds Z: 6.000 mm/min total power requirement 80 kW weight of the machine ca. 15 t dimensions of the machine ca. 7,7 x 6,9 x 3,9 m electrics - voltage/frequency 400 / 50 V/Hz centering device

Condition: good (used), Year of construction: 1999, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: Switzerland Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° to (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper: MT5 Reducing sleeve: MT5/MT4 Short external taper fitting: DIN 55026 / Size 5 Permissible torque: 160 Nm Guaranteed roundness for chuck work Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper fitting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Grinding wheel data (max. speed) Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR Grinding Head Power: 9.2 kW / 12.5 HP Wheel mounting, left max.: Ø 500 x 80 mm Right, additional max.: Ø 400 x 63 mm Internal grinding device: spindle HJN 828 Lower table (Z axis) Distance between centers: 1000 mm Max. travel: 1150 mm Max. speed: 15 m/min Knjdsw T Tb Hjpfx Aanof Max. resolution: 0.1 µm Upper table Distance between centers: 1000 mm / swivel 0° to 9° Grinding carriage (X axis) Max. travel: 320 mm Max. speed: 7.5 m/min Max. resolution: 0.1 µm Pneumatics Min. connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max. connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Unless otherwise stated, technical data is provided without engagement and may be subject to errors or omissions.

Year of construction: 1998, condition: ready for operation (used), General Data Machine weight 7500 kg Additional Equipment Measuring and positioning system tailstock special chuck for shaft parts This Schaudt ZX 11 grinding machine was manufactured in 1998. It includes a Knoll VRF 450/2250 system and features transport dimensions of approximately 8 loading metres at a maximum height of 2.2 meters, weighing around 7.5 tons. Accessories include a measuring and positioning system, tailstock, and a special chuck for shaft parts. A great opportunity to buy this Schaudt ZX 11 grinding machine. Contact us for further details regarding this grinding machine. Knedex D Rm Hjpfx Aansf Application Types Grinding

Condition: good (used), Surface grinder, grinding machine, horizontal surface grinder, surface grinder, magnetic grinder -Manufacturer: aba Abawerk, surface grinding machine-horizontal type FFK with magnetic plate Kjdpfx Aaeikgdmonsnf -Magnetic plate: 360 x 122 mm -Traverse paths: x 390 mm / y 170 mm / z 260 mm -Drive: 2.0 kW -Grinding wheel: Ø170 mm, max. 245 mm -Coolant device -Transport dimensions: 1120/1100/H1630 mm -Total weight: 604 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Vertical travel by hand: 330 mm Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Knedpfjw Ucxqex Aanof Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm All technical data are provided without guarantee and are subject to possible errors or omissions.

Year of construction: 2015, condition: ready for operation (used), Main Drive Spindle motor power 7.5 KW Tool taper 60 Additional Equipment Knjdpfx Aex D Hiwjanef Festool gripper arms Prism table (prisms are adjustable in length) This WEISS Rundschleiftechnik K52 grinding machine was manufactured in 2015. It features a robust MK4 center size, can handle workpieces up to 650cm, and has a center height of 180mm. The grinding wheel diameter is 500mm, and it includes a Marposs measuring device and an Eckelmann Enc 66 control unit. Consider the opportunity to buy this WEISS Rundschleiftechnik K52 grinding machine. Machine was general overhaul in 2023. Contact us for further details regarding this machine. Application Types Grinding

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 Kedpfx Aaew U Ry Nsnenf TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 2850 mm Measurements depth 4100 mm Measurements height 2350 mm Additional Equipment Automatic gripper clamping Various accessories and clamping devices Knjdpex D Hkbofx Aanjf Complete documentation Machine dimensions 4.1m x 2.85m x 2.35m / Dimensions of Felsomat workpiece loader 1.60m x 1.50m x 2.1m This 6-axis SAACKE UWIID grinding machine was manufactured in 2001. It features a NUM 1050 control, Num MDLU2 drives, a 24-pocket grinding wheel changer, and a Felsomat 70-slot workpiece loader. Equipped with CNC steady rest, automatic gripper clamping, and NUMROTO plus 3.8.1o software, it's ideal for manufacturing and resharpening. For more information about this grinding machine, please reach out to us. Application Types Grinding

Condition: excellent (used), machine/vehicle number: 31.207.011, Manufacturing origin Swiss Voltage 380/50/3 Netweight 3150 kg Dimensions 400x185x175cm Custom position 8460 TECHNICAL DATA Distance between centres 1000 mm Centres height 175 mm Wheelhead Wheel : diameter/width/bore 500 / 80 (100) / 203.0 mm Max width of wheel 80(100) mm Spindle speeds 1220,1360,1530 min-1 Table maximal travel 1100 mm Table, speed (variator, progressively adjustable) 0.02 to 6.0 m/min Workpiece headstock Swivel 360° speed (variator,progressive adjust) 20 min-1 to 400 min-1 Wheelhead motor 6 HP Total power 7 HP Max diameter of workpiece 249 mm Tailstock internal taper Morse 3 Knsdpfoiwtm Sjx Aanef errors and omissions excepted-data given without obligation

Year of construction: 1997, condition: ready for operation (used), Main Drive Number of axis 5 This 5-axis SAACKE UWIID grinding machine was manufactured in 1997. It operates on a 3 AC current type, with a frequency of 50 Hz and an operating voltage of 400 V. The machine features a rated power of 30 kW and a rated current of 52.9 A. Consider the opportunity to buy this SAACKE UWIID grinding machine. Contact us for more information. Knjdpfxsx D Hkhs Aanef Application Types Grinding

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS Knedsw T Sd Tjpfx Aansf MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2700mm Measurements depth 6200mm Measurements height 2470mm Machine weight 8500 kg This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine. Knsdpfxjx D H Rho Aanjf Application Types Grinding

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm Kodpsw T Sc Njfx Aanonf LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Year of construction: 2018, condition: ready for operation (used), Main Drive Spindle speed range 10000 rpm Number of axis 4 Additional Equipment Compliance with German and European regulations, including: Directive 98/37/EC (Machinery Directive) / Low Voltage Directive 73/23/EEC / Equipment and Product Safety Act (GPSG) /Prevention Principles (BGV A1) CE marking and written confirmation of compliance provided This 4-axis Willi Göbel GRS-III-2400-SP cylindrical grinding machine was manufactured in 2018. It offers precision and efficiency for your grinding needs. If you are looking to get high-quality grinding capabilities, consider the Willi Göbel GRS-III-2400-SP machine we have for sale. Contact us for more information. Application Types Kedsx D Sbrjpfx Aanjnf Grinding

Condition: refurbished (used), machine/vehicle number: 2257, Manufacturing origin France Voltage 380/50/3 Netweight 3000 kg Custom position 8460.29 20 Dimensions 2400x1550 mm TECHNICAL DATA Diameter capacity 80 mm Type 2HA : 120 mm Kodpfjfnm Iisx Aanjnf Maximum infeed grinding length 200 mm Maximum throughfeed grinding length (with normal-type guides) 300 mm Grinding wheel : -diameter 400 mm -maximum width 200 mm -bore 203.2 mm Driving wheel : -diameter 254 mm -width 200 mm -bore 127 mm Main drive motor 11-22 kW Driving wheel motor 1,1 kW Driving wheel speed 10 – 200 U/Min Standard accessories : 1 flange with grinding wheel 1 flange with driving wheel 1 workpiece support bridge 1 set of shims for workpiece support -Hydraulic dressing and trueing device for grinding and driving wheels -Variable speed drive of driving wheel -Electrical equipment for 3x380 v, 50 Hz -Main drive motor, 11 kW -Ammeter for main drive motor Starter keys and operating manual errors and omissions excepted data given without obligation.

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 1000 Measurements depth 1223 Measurements height 2150 Knjdpfxox D Sblj Aanjf Main Drive Spindle speed range 1400 Table Outer length 650 mm Outer width 500 mm This 3-axis O.M.N. SPR 600x300 surface grinding machine was manufactured in 2016. It offers precision and efficiency for your grinding needs. Consider the opportunity to buy this O.M.N. SPR 600x300 surface grinding machine. Contact us for more information. Application Types Grinding

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Knodsxt Ilfopfx Aanjf Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Year of construction: 2018, condition: ready for operation (used), Main Drive Number of axis 2 Movement X-Axis Movement 600 mm Y-Axis Movement 300 mm Control Unit Brand SIEMENS Model Siemens PLC This KNUTH HFS 3063B PLC was manufactured in 2018. It features a surface grinding machine with X-axis travel of 600mm and Y-axis travel of 300mm. If you are looking to get high-quality grinding capabilities, consider the KNUTH HFS 3063B PLC machine we have for sale. Contact us for more information. Knedpfx Aex D Ex Deanof Application Types Grinding

Year of construction: 2005, operating hours: 22,640 h, condition: ready for operation (used), Control Unit Brand FANUC Model 21i-TB This 4-axis STUDER S33 cylindrical grinding machine was manufactured in 2005. It features a dynamic balancing unit, Marposs push button insert, and includes 2 CBN grinding discs. The machine also comes with approximately 20 internal grinding mandrels and 3 collets. Consider the opportunity to buy this STUDER S33 cylindrical grinding machine. Contact us for more information about this machine. Knjdsx D D E Ajpfx Aanof Application Types Grinding

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 710 mm Measurements depth 1565 mm Measurements height 1385 mm Kodpox D Hk Usfx Aanjnf Machine weight 350 kg Main Drive Spindle speed range 1500 - 3000 Media Power consumption 700 W This HOFMANN GMT 35 grinding machine was manufactured in 2022. It operates on a 230 V AC supply, with a power consumption of 700 W. Features include a speed range of 1500 - 3000 min⁻¹, a water tank volume of 45 l, and a trough volume of 35 l. Dimensions are 1565 mm in length, 710 mm in width, and 1385 mm in depth, weighing 350 kg. Contact us for more information about this machine. Application Types Grinding

Year of construction: 2012, condition: ready for operation (used), Main Drive Number of axis 3 Additional Equipment Sanding Unit/Sanding Belt: 120 x 2300 mm/Drive Power: 7.5 kW/Belt Tension: Pneumatic/Oscillation Range: 10 - 80 mm for optimum belt utilization and cooling/Removal Rate: Approx. 80 cm³/min Kjdpjx D Hkzofx Aansnf This 3-axis KUHLMEYER Fasen Fix 4.1-1500 grinding machine was manufactured in 2012. It is designed for precision grinding applications, offering robust performance and reliability. If you are looking to get high-quality grinding capabilities, consider the KUHLMEYER Fasen Fix 4.1-1500 machine we have for sale. Contact us for more information. Application Types Grinding