Used Zay 7045 for sale (53)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Sankt Veit in der Südsteiermark
6,349 km
Forklift
STILLRX70-45 mit SS + 4. Kreis + Kab.
Call
Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 7,106 h, load capacity: 4,500 kg, lifting height: 3,680 mm, fuel type: diesel, construction height: 2,580 mm, Equipment: cabin, lighting, sideshift, trailer coupling, Diesel forklift STILL RX70-45
Nsdpeyc Sbwefx Adwjcl
Year of manufacture: 2015
According to the hour meter: 7,106 hours
Lifting capacity: 4.5 tonnes
Overall height: 2.58 m
Lifting height: 3.68 m
Power: 55 kW
- Duplex full free lift mast
- Sideshift
- 4th hydraulic function up to fork carriage
- Load backrest
- Fully enclosed cabin with heater (only one door)
- Lighting system
- Original paint
- Immediately ready for use
- Good tires
Selling price: €11,900 net
Affordable delivery also possible!
Listing
Münster
6,957 km
Diesel Forklift
StillRX70-45
Call
Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,886 h, load capacity: 4,500 kg, lifting height: 5,380 mm, free lift: 1,625 mm, fuel type: diesel, mast type: triplex, construction height: 2,600 mm, fork carriage width: 1,300 mm, fork length: 2,400 mm, empty load weight: 6,793 kg, drive type: Diesel, Diesel forklift
Load centre: 500 mm
ISO class: ISO class 3 = 2,500 - 4,999 kg
Mast type: Triplex
Transmission: Electromechanical
Condition: Ready for use and fully functional
Technical condition: Very good
Front tyre type: Superelastic
Ncedjyb Urcopfx Adwjl
Front tyre size: 355/50-15
Rear tyre type: Superelastic
Rear tyre size: 250-15
Description: Location 02943 Weißwasser
Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, soot filter, full cabin, full free lift, safety light, interior mirror, joystick, windscreen wiper, single pedal, LED,
Listing
Siedlce
5,967 km
Milling and drilling
CORMAKZX7045B1
Call
Condition: new, Year of construction: 2025, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally.
Ncjdpfxovxth Ho Adwel
Rigid, sturdy cast iron
Autofed spindle
Milling machine height adjusted on the support, not on the column
Additional flood coolant system
Rigid cross table with precisely ground surface
Dovetail-shaped guides
Quiet work due to the ground gears
Left/right rotation
+/- 90° rotary head
Adjustable head height
Base available optionally
Technical data
Steel drilling efficiency
32 mm
Cast iron drilling efficiency
45 mm
Frontal mill diameter
80 mm
Arbor mill diameter
28 mm
Spindle speed
50–3024 rpm (6/12)
Arbor chuck
MK4
Spindle feed
110 mm (automatic feed)
Worktable dimensions
820 mm×240 mm
Maximum distance from spindle to table
475 mm
X-axis longitudinal travel
550 mm
Y-axis transverse travel
170 mm
Left/right rotary head
90°
Motor power
1.3/1.8 kW
Power supply
400V
Weight
360 kg
Listing
Siedlce
5,967 km
Milling and drilling
CORMAKZX7045E
Call
Condition: new, Year of construction: 2025, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go!
Machine characteristics
Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use.
Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications.
Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects.
Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results.
Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop.
Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks.
Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing.
Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge:
Drill chuck
Reduction bush MK4/MK3
Reduction bush MK3/MK2
The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance!
(Base available as an option)
Technical data
Maximum drilling diameter
45 mm
Maximum face milling diameter
80 mm
Maximum cylindrical milling cutter diameter
28 mm
Maximum thread diameter
12 mm
Spindle pin protrusion
100 mm
Spindle taper
MT4
Spindle speed (6 speeds for 1400r/min motor)
1400r/min )
95, 170, 280, 540, 960, 1600min-1
Maximum distance from spindle nose to table
460 mm
Travel in X / Y / Z axis
500 / 210 / 425 mm
Distance from spindle to column surface
245 mm
Work table dimensions
730x210 mm
Ncjdpfxjud Iztj Adwel
Base dimensions
400x600 mm
Motor s1/s6
1500W/2100 W 400V
Machine dimensions (height with base)
1080 x 770 x 1460 mm
Weight
278 kg
Available accessories
MK3/B18 drill chuck shank
handy tools
drill chuck 3-16 mm/B18
reduction sleeve MK4/MK3
reduction sleeve MK3/MK2
Listing
Siedlce
5,967 km
Milling and drilling
CORMAKZX7045E 230V
Call
Condition: new, Year of construction: 2025, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go!
Machine characteristics
Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use.
Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications.
Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects.
Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results.
Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop.
Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks.
Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing.
Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge:
Drill chuck
Reduction bush MK4/MK3
Reduction bush MK3/MK2
The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance!
(Base available as an option)
Technical data
Maximum drilling diameter
45 mm
Maximum face milling diameter
80 mm
Maximum cylindrical milling cutter diameter
28 mm
Maximum thread diameter
12 mm
Spindle pin protrusion
100 mm
Spindle taper
MT4
Spindle speed (6 speeds for 1400r/min motor)
1400r/min )
95, 170, 280, 540, 960, 1600min-1
Maximum distance from spindle nose to table
460 mm
Travel in X / Y / Z axis
500 / 210 / 425 mm
Distance from spindle to column surface
245 mm
Work table dimensions
730x210 mm
Base dimensions
400x600 mm
Motor s1/s6
1500W/2100 W 230V
Machine dimensions (height with base)
1080 x 770 x 1460 mm
Weight
278 kg
Available accessories
MK3/B18 drill chuck shank
Nsdpswnb T Ijfx Adwecl
handy tools
drill chuck 3-16 mm/B18
reduction sleeve MK4/MK3
reduction sleeve MK3/MK2
Listing
Siedlce
5,967 km
Milling and drilling
CORMAKZX7045
Call
Condition: new, Year of construction: 2025, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock.
Machine characteristics
The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it.
HEAVY, STABLE CAST IRON
THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN
SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE
DOVETAIL GUIDES,
QUIET RUNNING THANKS TO GROUND GEARS
LEFT AND RIGHT ROTATION
OPTIONAL HEAD +/- 90 degrees
ADJUSTABLE HEAD HEIGHT
Machine base available as an optional extra - 200€
Technical data
MAXIMUM DRILLING SIZE
45 mm
MAXIMUM FACE DRILLING
80 mm
MAXIMUM FACE MILLING
Nodpfxsud H Hus Adwscl
28 mm
MAXIMUM THREADING
12 mm
SPINDLE PASSAGE
120 mm
SPINDLE TAPER
MT4
SPINDLE SPEED (6 MOTOR SPEEDS
1400r/min )
95,170,280,540,960,1600min-1
MAX. DISTANCE FROM SPINDLE TIP TO TABLE
475 mm
DISTANCE FROM SPINDLE TO COLUMN SURFACE
260 mm
WORKING TABLE DIMENSIONS
820 x 240 mm
TABLE TRAVEL
550 x 170 mm
MOTOR
1,1kW / 1,5hp
Voltage (two options to choose from)
400V (three-phase motor)
PACKING DIMENSIONS
1140 x 800 x 1040 mm
NET WEIGHT
270 kg
Available accessories
MK4/B18 drill chuck shank
handy tools
Drill chuck 3-16 mm/B18
reduction sleeve MK4/MK3
reduction sleeve MK3/MK2
instruction manual in Polish
Listing
Siedlce
5,967 km
Milling and drilling
CORMAKZX7045E DRO
Call
Condition: new, Year of construction: 2025, Machine Characteristics
Heavy, Stable Cast Iron Body:
A solid structure based on a heavy cast-iron frame ensures stability and durability, even during intensive use.
Milling Height Adjustment on the Support:
A unique height adjustment system located on the support, rather than on the column, allows the machine to be adapted to various applications.
Massive Cross Table for Milling/Drilling:
The large, precisely ground table surface provides a solid base for a wide range of projects.
Dovetail Guides:
Innovative dovetail-shaped guides ensure smooth movement along all three axes, resulting in excellent machining precision.
Quiet Operation Thanks to Ground Gears:
Ground gears ensure quiet operation, improving working comfort in the workshop.
Left and Right Spindle Rotation:
Operate the tool in both directions to suit different tasks.
Tiltable Head (+/- 90°) and Adjustable Head Height:
Flexible angle adjustments and head-height control provide full machining versatility.
Digital Longitudinal and Cross Readouts
Additional Options, Additional Benefits
The ZX 7045E DRO version is available immediately from stock, and you also receive a free accessory set:
Ncodsx Dkr Nspfx Adwel
Drill chuck
Reducing sleeve MK4/MK3
Reducing sleeve MK3/MK2
ZX 7045E DRO Milling-Drilling Machine
The ZX 7045E DRO is a high-precision, advanced machine tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and a robust construction, it enables accurate milling and drilling across a wide range of materials. Thanks to its versatility and reliability, the ZX 7045E DRO is an ideal solution for professional workshops, meeting the demands of even the most complex machining applications.
(The base is available as an optional accessory.)
Technical Specifications
Maximum drilling diameter: 45 mm
Maximum face mill diameter: 80 mm
Maximum end mill diameter: 28 mm
Maximum thread diameter: 12 mm
Spindle quill travel: 100 mm
Spindle taper: MT4
Spindle speeds (6 speeds): 95, 170, 280, 540, 960, 1600 rpm
Maximum distance spindle nose–table: 460 mm
X / Y / Z travel: 500 / 210 / 425 mm
Distance spindle–column surface: 245 mm
Worktable dimensions: 730 × 210 mm
Base dimensions: 400 × 600 mm
Motor (S1/S6): 1500 W / 2100 W, 400 V
Machine dimensions (with base): 1080 × 770 × 1460 mm
Weight: 278 kg
Included Equipment
2-axis digital readout
MK3/B18 drill chuck arbor
Hand tools
3–16 mm drill chuck (B18)
Reducing sleeve MK4/MK3
Reducing sleeve MK3/MK2
User manual
Listing
Siedlce
5,967 km
Base for ZX 7045B1 milling-drilling
CORMAKPodstawa do frezarko-wiertarki ZX 7045B1
Call
Condition: new, Year of construction: 2025, Base for ZX 7045B1 milling-drilling machine
Ncodpfx Adovxtmpswsl
Listing
Siedlce
5,967 km
Milling and drilling
CORMAKZX7045B1 + DRO
Call
Condition: new, Year of construction: 2025, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking.
Product features
HEAVY, STABLE CAST IRON
AUTOMATIC SPINDLE FEED
HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN
ADDITIONAL LIQUID COOLING
SOLID CROSS TABLE WITH PRECISION GROUND SURFACE
DOVETAIL GUIDES,
QUIET OPERATION THANKS TO GROUND GEARS
LEFT AND RIGHT ROTATION
HEAD ROTATABLE +/- 900
ADJUSTABLE HEAD HEIGHT
DIGITAL READOUT
Base available as an optional extra
Ncedjud H H Uopfx Adwsl
TECHNICAL DATA
Drilling capacity in steel 32 mm
Drilling capacity in cast iron 45 mm
FACE MACHINE DIAMOND 80 mm
HANDS CAPACITY 28 mm
SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12)
MANDREL HANDLE MT 4
Spindle feed 125 mm (AUTOMATIC FEEDING)
DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm
DIMENSIONS OF BASE 580 x 600 mm
MAX. Spindle distance from the table 445 mm
Spindle distance from column surface 260 mm
AXIS MOVEMENT X/Y/Z 515/175/430 mm
PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev.
90° CLOCKWISE/LEFT HAND ROTATION
MOTOR POWER 1,8 kW 2,5 hp
POWER SUPPLY 400 V
weight 350 kg
Available accessories
drill chuck shank MK4/B18
digital readout
handy tools
drill chuck 3-16 mm/B18
reduction sleeve MK4/MK3
reduction sleeve MK3/MK2
English language user manual
Listing
Neustadt an der Weinstraße
6,916 km
Forklift
STILLRX70-45
Call
Condition: reconditioned (used), functionality: fully functional, Year of construction: 2014, operating hours: 11,500 h, load capacity: 4,500 kg, lifting height: 4,480 mm, free lift: 160 mm, load center: 500 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, tire condition: 60 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), Equipment: cabin, trailer coupling, Viewing and test drive possible on site!
Diesel front loader STILL RX70-45
Year of construction 2014
Operating hours approx. 11,500 h
Refreshed paint
Technology Workshop tested
FEM test NEW
SE Black tires
Tele / double mast
Overall height 2,850 mm
Free lift 160 mm
Nominal stroke 4,080 mm
Basic load capacity 4,500 kg
Ncedpfevb D H Eox Adwol
Fork carriage 3A
Cab with IWS brush door, front, roof and side windows
Additional double hydraulics for Tele
Hydr. actuation mini lever (4 levers)
Driver's seat MSG65 imitation leather
Drive control single pedal
Mechanical parking brake
Working lights front top
Rotating beacon and rear reversing light
Attachment at extra cost
Listing
Iszkaszentgyörgy
6,154 km
Drilling-milling machine
TNMZ7045
Call
Condition: new, Year of construction: 2025, functionality: fully functional, Table size 800 x 240 mm
Table area 730 x 210 mm
“T” slot size on table 14 (M12)
Speed range 75 – 3200 rpm
Drilling capacity in cast iron 45 mm
Drilling capacity in steel 32 mm
Longitudinal movement range (X) 560 mm
Transverse movement range (Y) 190 mm
Vertical travel range (Z) 350 mm
Tool holders ISO40/Morze 4
Spindle - column distance 460 mm
Distance between spindle nose and table surface 445 mm
Spindle stroke 120 mm
Total machine height in Z upper position 1450 mm
Spindle can be tilted +/-90 degrees
Spindle power 1.1/1.5 / 400V
Ncsdpfx Adexz D Npswjl
Machine weight 480 kgs
Dimensions 1280 x 960 x 2100 mm
Accessories
- Thread cutting function
- 3-way path measuring system
- Y+Z axis covers
- ISO40 drill chuck adapter
- Built-in digital depth gauge
- Automatic X-axis stepless feed and rapid traverse
- Motorized gear lifting and lowering
- Machine lamp
- Cast iron machine base
The machine is in brand new condition. Never used in production.
Listing
Remscheid
6,986 km
Control unit
Siemens1FT5064-0AC01 Servomotor SN:E7K10704510005
Call
Condition: ready for operation (used), Siemens 1FT5064-0AC01 Servomotor SN:E7K10704510005 ,used, normal signs of wear, 100% functional, scope of delivery as per photos
Ncjdpfx Ajvgplwodwjl
Listing
Großenlüder
6,821 km
Blasting hall with suction floor, e.g. glass beads
Fritz SandstrahltechnikSH07045A
Call
Condition: new, Year of construction: 2025, Bam house 7x4.5m with suction floor for mineral blasting agents (glass, ceramics, corund, grenade sand our.).
Magnetic separator, cyclone, treatment, material bunker,
Radiant refill, free-beam pressure blower, filter system with cleaning. Lining the walls with 4mm fabric gum. Ceiling flap for crane loading.
For questions about technical specifications, etc., please contact us in writing or by phone.
The basis of the machines is the production at the Grossenlueder site since 1971. Harth & Seifert-Georg Fischer-Schiffmann and Seidl-Oliver Fritz GmbH & Co. Kg with the long-time known contacts
Njdpfx Aed Naafsdwecl
Listing
Bovenden
6,798 km
Other
RX 70-45 Frontstapler
Call
Condition: used, mileage: 1,001 km, gearing type: other, fuel type: gas, color: orange, empty load weight: 6,446 kg, maximum load weight: 4,500 kg, first registration: 01/2016, Year of construction: 2016, driver cabin: other, Vehicle location: Bovenden,
Body: counterbalance forklift with pallet forks, approx. 8,032 operating hours, LPG forklift, max. load capacity 4,500 kg, unladen weight 6,446 kg, full cab. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!
Nedpfxjxbfyij Adwscl
Listing
Münster
6,957 km
Diesel Forklift
StillRX70-45
Call
Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 8,631 h, load capacity: 4,500 kg, lifting height: 4,330 mm, free lift: 1,280 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork length: 1,200 mm, drive type: Diesel, Diesel Forklift
Load Centre: 500 mm
ISO Class: ISO Class 3 = 2,500 - 4,999 kg
Mast Type: Triplex
Transmission: Electromechanical
Condition: Ready for operation and fully functional
Technical Condition: Very good
Front Tyres Type: Superelastic
Front Tyres Size: 355/50-15
Rear Tyres Type: Superelastic
Rear Tyres Size: 250-15
Description: In addition to this unit, we also offer other forklifts and warehouse equipment. All our machines are workshop-inspected and certified according to FEM 4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Naturally, we also purchase your used equipment, even if you do not buy a vehicle from us. Lease-purchase and attractive financing options are available on request. We are happy to provide you with professional and detailed advice regarding our vehicles.
Ncedpfx Aexqiqkodwol
3rd valve, 4th valve, rear work lights, front work lights, heater, soot filter, fully enclosed cabin, full free lift, safety light, interior mirror, joystick, beacon, windscreen wiper, single-pedal control, seat,
Listing
Wendelstein
6,699 km
4-wheel forklift
StillR70-45 Diesel Gabelstapler 4.500kg Hub
Call
Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 10,237 h, load capacity: 4,500 kg, lifting height: 3,880 mm, fuel type: diesel, mast type: simplex, construction height: 2,600 mm, power: 53 kW (72.06 HP), motor manufacturer: Deutz, gearing type: hydrostat, fork length: 1,800 mm, empty load weight: 6,412 kg, total height: 2,600 mm, color: orange, motor model: BF 4M 1012E, Equipment: adjustable boom, cabin, front guard, lighting, pallet forks, sideshift, trailer coupling, Forklift truck:
+ Still
+ R70 45
+ Year of manufacture 2005
+ 10,237 operating hours
+ Deutz diesel engine, BF 4M 1012 E, 72HP
+ Own weight: 6,412kg
+ Lifting capacity: 4,500kg
Ncodpfx Aewqc Tbsdwjl
+ Height: 260cm
+ Fork length: 180cm
+ Lifting height: 388cm
+ Sideshift
+ Hydraulic fork adjustment
+ Full cabin with heating and work lights
+ Yellow light
+ Forklift from 1st owner
Receive all newly listed vehicles by email – sign up for our NEWSLETTER!
Errors and spelling mistakes possible, intermediate sale reserved!
Listing
Cloppenburg
6,932 km
2021 Loroch Solution K850-T
LorochSolution K850-T
Call
Condition: used, Year of construction: 2021, Suitable for fully automatic grinding or re-toothing and beveling of HSS and segment circular saw blades as well as solid carbide circular saw blades, cutting saw blades/thin-cutting saws with chip breaker (diameter of 200-500 mm, tooth pitch of 8-30 mm), using deep grinding techniques with CBN or diamond grinding wheels. Accessories: Total enclosure,
Prepared for later installation of a device for grinding chip grooves,
Automatic central lubrication,
Automatic threading of the grinding wheel, including checking the diameter and tooth pitch,
Device for fully automatic chamfering of regularly toothed saw blades (from Automatic sawblade holder movement to the entered saw blade diameter
Programmes for all standard curved and pointed teeth,
Circular grinding of sawblades to grind down the existing teeth
Ncsdjycu Itspfx Adwol
Automatic switching of the peripheral speed between CBN and diamond grinding wheels
Extinguishing generator
Absolent extraction system
Machine light
1 saw blade holder F1730,
Coolant system with 300 l tank,
Operating tools,
Electricak cabinet chiller,
Oil collection tray.
saw diameter: ( 40 ) 130 – 850 mm
Tooth pitch: 1 - 50 mm
number of teeth: 2 - 998
saw blade thickness: max. 8 mm
Grinding wheel diameter: 200 x 32 mm
coolant pressure: approx. 6 bar
Connected load: approx. 8,9 kW (400 V / 50 Hz)
Weight: about 1260 kg
Dimensions: L x W x H = 1250 x 1870 x 2250 mm
colour: grey RAL 7045 / RAL 7047.
Listing
Cloppenburg
6,932 km
2011 Loroch Solution K850
LorochSolution K850
Call
Condition: used, Year of construction: 2011, Suitable for fully automatic grinding, re-toothing, and beveling of HSS and segmented circular saw blades, as well as solid carbide circular saw blades, chamfering saw blades/thin-cutting saws with chip breakers (diameters from 200-500 mm, tooth pitch from 8-30 mm), using a deep grinding process with CBN or diamond grinding wheels. Accessories: Total enclosure
Automatic central lubrication
Integrated coolant system with coolant tank and pump
Device for fully automatic chamfering of regularly toothed saw blades
Programmes for all standard curved and pointed teeth
CAD programme for designing your own tooth shapes and changing the speed sequences
Automatic threading of the grinding wheel, including checking the saw blade diameter and tooth pitch
Service software with error diagnosis display on the screen
Automatic switching of the peripheral speed between CBN and diamond grinding wheels
Grinding wheel thickness compensation, i.e. different tooth pitches can be ground with one grinding wheel
Conversion kit for oil (pressure relief flap, electromechanical door lock, pressure monitor, etc.),
Aerosol fire extinguishing system
Oil drip tray
Machine light
Control cabinet cooling unit.
Saw diameter: (40) 130 - 850 mm
Tooth pitch: 1 - 55 mm
Number of teeth: 2 - 998
Saw blade thickness: max. 8 mm
Grinding wheel diameter: 200 x 32 mm
Coolant pressure: approx. 6 bar
Nsdpfoycu Erox Adwscl
Coolant tank: approx. 300 l
Grinding motor: 3 kW
Connected load: approx. 7.3 kW (400 V / 50 Hz)
Weight: approx. 1600 kg
Dimensions: L x W x H = 1250 x 1870 x 2250 mm
colour: grey RAL 7045, RAL 7047.
Listing
Siedlce
5,967 km
Mechanical Table Feed
CORMAKAutoposuw, posuw automatyczny osi X
Call
Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milliAutomatic X-axis feed designed for milling and drilling machines: ZX7032G, ZX7045, ZX7045 DRO, ZX7045B1, ZX7045B1 DRO, ZX7045 BXL, ZX7045 BXL DRO, ZX7055, ZX7055 DRO.
Mechanical Table Feed for Milling Machines: A Tool for Precision Machining
Our mechanical table feed is an essential accessory for workshops and professional machining facilities. With horizontal mounting, the unit ensures stability and precision during a wide range of milling operations. It is an ideal solution for both hobbyists and professional users, offering smooth speed adjustment and rapid feed, allowing flexible adaptation to different materials and machining tasks.
Invest in our mechanical table feed and unlock new possibilities in precision material machining. For both craft enthusiasts and professionals, this is a tool that meets the highest expectations on every project.
Manufacturer: Cormakg and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally.
Rigid, sturdy cast iron
Autofed spindle
Milling machine height adjusted on the support, not on the column
Additional flood coolant system
Rigid cross table with precisely ground surface
Dovetail-shaped guides
Quiet work due to the ground gears
Left/right rotation
+/- 90° rotary head
Adjustable head height
Base available optionally
Technical data
Steel drilling efficiency
32 mm
Cast iron drilling efficiency
45 mm
Frontal mill diameter
80 mm
Arbor mill diameter
28 mm
Spindle speed
50–3024 rpm (6/12)
Arbor chuck
MK4
Spindle feed
110 mm (automatic feed)
Nsdpfx Adeyct Aiswscl
Worktable dimensions
820 mm×240 mm
Maximum distance from spindle to table
475 mm
X-axis longitudinal travel
550 mm
Y-axis transverse travel
170 mm
Left/right rotary head
90°
Motor power
1.3/1.8 kW
Power supply
400V
Weight
360 kg
Listing
Cloppenburg
6,932 km
2010 Vollmer QXD 200
VollmerQXD 200
Call
Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure,
Extraction N183,
Cooling and cleaning device for dielectric,
Automatic fire extinguishing device,
Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading
1 set of gripper fingers for workpiece automation HSK 63/SK40
Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A,
1 exchange element with flange,
1 x flushing kit,
Test bar
X axis travel: 440 mm
B-axis: +/- 15°
Y axis travel: 876 mm
Z-axis travel: 420 mm
E-axis swivel range: 210°
A-axis rotation range: 360°
workpiece carrier base: SK 50
workpiece length max.: 200 mm
Workpiece diameter max.: 250 mm
workpiece weight: 15 kg
Connected load approx.: 6.7 kW 400V/50 Hz
Nodpfxsycckcj Adwocl
Weight approx: 7000 kg
Dimensions W x D x H =: 1987 x 3141 x 2275 mm
colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1
Listing
Cloppenburg
6,932 km
2017 Vollmer QXD 250
VollmerQXD 250
Call
Year of construction: 2017, condition: used, Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard materials. Workpieces are mounted vertically. Accessories:
Total enclosure
External PC incl. CAD/CAM and ExLevel Pro software
Software package with additional functions for metalworking tools,
Wheelchanger for up to 6 eroding/grinding discs,
Adaptation to A-axis on HSK 63-A-E
Coolant system with pump & cooling unit
Automatic central lubrication
Automatic fire extinguishing system
Automatic shut-off flap
Glass scales on the X, Y & Z linear axes,
Mechanical mist separators N280,
3 grinding wheel change elements
Test mandrel HSK63A.
Also available with workpiece magazine as an option!
Workpiece outer diameter: max. 320 mm
Tool outer diameter: Max. 200 mm
workpiece length: max. 250 mm
Bore diameter: Max. 60 mm
Travel path X1: 520 mm
Travel path Y1: 970 mm
Travel path Z1: 420 mm
Rotation range axis A1: 360°
Rotation range axis B1: +/-20°
Rotation range axis E1: 210°
Grinding spindle speed: stepless 0 - 4500 rpm (torque 6Nm)
Connected load: approx. 8.7 kVA/ 6.8 kW
Nedpfsxy Ry Sjx Adwscl
mass: approx. 7100 kg
Dimensions: W x D x H = 4012 x 2889 x 2611 mm
colour: RAL 7047 telegray 4 / RAL 7045 telegray 1
Trust Seal
Dealers certified through Machineseeker

Listing
Cloppenburg
6,932 km
2015 Vollmer QXD 250
VollmerQXD 250
Call
Year of construction: 2015, condition: used, Disc EDM machine for the complete machining of rotationally symmetrical workpieces with cutting edges made of ultra-hard cutting materials. The workpieces are mounted vertically (suspended). Accessories: Total enclosure,
Software for woodworking tools
Software for P-system peeling cutters
Software for scoring saws/radius cutters
Software for 360° path programme
Ncsdpsxy Ryrjfx Adwjl
Software for 360° peeling cutters
Workpiece magazine N250 (pallet magazine for max. 28 workpieces),
Disc changer for up to 6 eroding/grinding discs,
Adaptation to A-axis on HSK 63- F,
Coolant system with pump & cooling unit
Automatic central lubrication
Automatic fire extinguishing system
Automatic shut-off flap
Gripper fingers for workpiece automation,
4 workpiece holders for workpiece magazine,
1 exchange element with flushing kit,
Mechanical mist separator N183,
Test mandrel HSK63F.
Maximum workpiece outer diameter.: 320 mm
workpiece length: max. 250 mm
Travel path X1: 520 mm
Bore diameter: Max. 60 mm
Travel path Y1: 970 mm
Travel path Z1: 420 mm
Rotation range axis E1: 210°
Grinding spindle speed infinitely variable: 0 - 4500 rpm.
Rotation range axis A1: 360°
Rotation range axis B1: +/-20°
Connected load approx.: 8.7 kVA / 6.8 kW (400 V/50 Hz)
Weight approx.: 7100 kg
Dimensions L x W x H: 4012 x 2889 x 2611 mm
colour: RAL 7047 telegray 4 / RAL 7045 telegray 1
Listing
Cloppenburg
6,932 km
2005 Vollmer QXD 400
VollmerQXD 400
Call
Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production.
Accessories:
Total enclosure
Software path management
Software P- System for peeling cutters,
Software shaft endmills (207/208)
Software discoid tools face (221/222/223/224)
Software profiled workpieces (233/234/239/240)
Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263)
Software discoid tools (264/265)
Software shaft and jointing cutters (267/268/277/278)
Software step tools (271)
Software scoring saws (299)
Software saws flat tooth (301)
Software saws single sided with chamfer (302/303)
Software saws alternate tooth (304)
Software saws triple chip (309)
Software saws flat top tooth (310)
Software saws flat trapezoid tooth (311)
Software saws alternate tooth with chamfer (312)
Software shaft and jointing cutters (7/8)
Software shaft and jointing cutters profiled (33/34)
Software hoggers, profiled hoggers (53/54/55/56/57/58)
Software discoid tools (64/65)
Software shaft and jointing cutters (67/68/77/78)
Software compensation (90)
Software saws flat tooth (101)
Software saws single sided with chamfer (102/103)
Software saws alternate tooth (104)
Software saws triple chip tooth (109)
Software saws flat top tooth (110)
Software saws triple chip tooth (111)
Software saws alternate tooth with chamfer (112)
Software for polishing of profiled hoggers (757/758/760/761)
Filter system with chiller for dielectric fluid
Automatic fire extinguishing system DIN 14497
Standard programs for measuring, eroding etc.
Program for chamfering of workpiece cutting edges,
Automatic Diagnosis program for machine operational status with text output on screen
Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine,
6 sided erosion wheel changer,
Workhead SK 50 with adapter to 12 HSK 63 A,
Turntable workpiece magazine for 12 workpieces SK 50,
Turntable workpiece magazine for 4 workpieces SK 50,
6 flush sets
QXD250 CAD/CAM for external PC workstation including ARES drawing program,
Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse,
1 HSK63 F adapter for measuring the machine.
X axis travel: 730 mm
B axis travel: +/- 30 °
Y-axis travel: 840 mm
Z axis travel: 500 mm
E-axis: 330°
A-axis: 360°
Njdpfx Aew S I Dgsdwocl
Workpiece carrier: SK50
workpiece length max.: 400 mm
Workpiece diameter max.: 400 mm
workpiece weight max.: 15 kg
Connected load approx.: 6.7 kW (400 V / 50 Hz
Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm
Weight approx.: 7800 kg
colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1
Listing
Osnabrück
6,930 km
Die-sinking edm
OPS INGERSOLLGantry Eagle 1200 EDM
Call
Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 576409, OPS INGERSOLL GANTRY EAGLE 1200
Year of construction 2017
Machine No. 576409
Standard Specifications
1.01 Eagle Powertec PC/NC
* Multiprog Powertec technology programming on PC/NC and as CD (external programming place)
* Powertec Easy Burn high-speed programming
* Powertec Handheld - multi-functional hand control device
Nsdswu Hb Rjpfx Adwecl
* Manual eroding with Powertec Handheld
* Interfaces Ethernet and USB
* Multi-control light (remote maintenance via Internet), free of charge during the guarantee period
1.02 Eagle Powertec fine finish generator PT60
1.03 Eagle Power Jump with 18m/min interval speed in the Z-axis
1.04 Pressure flushing programmable, suction connection manually
1.05 Filter unit, 32m² paper filter
1.06 Compressor cooler
1.07 CO2 fire-extinguishing system
1.08 Color: Structural lacquer in cobalt-blue (RAL5013), grey (ral 7045), yellow (RAL1021)
1.09 Machine shoes
Feature Specification
XYZ travels 1 000 × 1 500 × 700 mm
Tank size 1 270 × 1 770 × 680 mm
Table size 1140 ×1640mm
Table load capacity 7 500 kg
Max head load 300 kg
Rapid traverse 5 000 mm/min
High-speed Z jump 18 000 mm/min (18 m/min)
CNC Control Dual 32-bit PC, touchscreen, USB/Ethernet
Generator (PT60) Adaptive current, 60 A
Dielectric volume & filter 2 400 L, 32 m² filter
Machine size & weight 2 950 × 3 950 × 3 440 mm, ~12 000 kg
Listing
Cloppenburg
6,932 km
2007 Vollmer QWD 760
VollmerQWD 760
Call
Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:
Nedpfx Adowtmg Djwecl
Total enclosure,
Cooling unit for dielectric,
automatic fire extinguishing system,
Mist extractor N181
Probe,
Machine lamp,
automatic central lubrication,
Workpiece carrier ISO50,
Measuring mandrel,
Cutter outside diameter: Max. 250 mm
Cutting length: max. 260 mm
Shank tool diameter: 10 - 250 mm
Outside diameter disc-shaped tools: Max. 250 mm
Tool weight max.: 20 kg
X axis travel: 275 mm
Y-axis travel: 300 mm
W-axis travel: 200 mm
A-axis mounting cone: ISWO 50
E-axis swivel range: 180 °
Required space for the machine: 2535 x 2200 x 2220 mm
Weight approx.: 4500 kg
Connected load: 4.5 kW (400 V / 50 Hz)
colour: gray RAL 7045/7047
We make it easier for you to find: "zay 7045"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Zay 7045 (53)
Search Machineseeker now with more than 2,00,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you




































































































































































