Used Zprinter 650 for sale (3,132)

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 5,500 kg, fuel type: electric, – Manufactured in Poland – Year of manufacture: 2019 – Vibratory feeder TECHNICAL SPECIFICATIONS: – Inlet width: 650 mm – Inlet height: 250 mm – Shaft diameter: 600 mm – Shaft width: 650 mm – Main motor: 110 kW Djdpfxjyw Sqis Aptecl – Number of knives: 2 pcs. – Knife length: 650 mm – 4 lower driven toothed shafts – Lower shafts motor: 4 kW – 3 upper driven toothed shafts – Upper shafts motor: 4 kW – Vibratory feeder length: 5000 mm – Vibratory feeder width: 620 mm – Vibratory feeder motor power: 4 kW – Feed forward / reverse – Screen: 100 x 80 mm – Hydraulic lifting of shafts and cover – Hydraulic pump motor power: 1.1 kW – Transport dimensions (L/W/H): 820 / 180 / 190 cm – Weight: ~5400 kg

Condition: used, machine/vehicle number: 16674, Year of construction: 2016, operating hours: 7,566 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 1,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,880 mm, battery voltage: 80 V, fork length: 1,200 mm, overall weight: 6,112 kg, 5008733 Serial Number: FN524966 Dcjdpfx Ajxwf Rasptsl Battery Details: 80V 5EPZS 775Ah BJ:2019

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, We are selling a CNC turning machine, model SL2500SY/650. Djdpfx Apozv N Nqetocl Year of manufacture: 2002 Control system: MSG 805 V Software: MAPPS Spindle motor: 22 / 18.5 kW Counter-spindle motor: 11 / 7.5 kW VDI turret Chip conveyor 2-stage clamping system Interface for a bar feeder Travel distances: X 305 mm Z 690 mm Y 120 mm Max. turning diameter: 490 mm Standard turning diameter: 260 mm Max. turning length: 650 mm Max. spindle speed: 4000 rpm Spindle bore: 88 mm

Condition: ready for operation (used), functionality: fully functional, rotor length: 650 mm, rotational speed (max.): 160 rpm, rotor diameter: 500 mm, TECHNICAL DETAILS Hopper opening: 1,850 × 1,250 mm Hopper volume: approx. 3.0 m³ Rotor diameter: 500 mm Rotor length: 650 mm Rotor speed: approx. 160 rpm Power: material-dependent MACHINE DETAILS Control system: PLC control Motor-gearbox power: 45 kW Control cabinet: Fully wired Cable length: 5 m EQUIPMENT Dcsdpfxozr Hyls Aptol Control cabinet including 5 m cable Automatic star-delta starter

Condition: used, functionality: fully functional, machine/vehicle number: H2X392V01052, Year of construction: 2019, operating hours: 650 h, load capacity: 2,500 kg, lifting height: 3,270 mm, free lift: 1,730 mm, fuel type: diesel, mast type: duplex, construction height: 2,200 mm, drive type: Diesel, Diesel Forklift VIN: H2X392V01052 Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Very good Dcedpfewct E Eex Aptsl Description: Linde H25D-02 No.: R0563 Year of Manufacture: 2019 Operating Hours: 650 The unit is visually and technically in very good condition. Fast and uncomplicated transport is possible upon request! This listing is for identification purposes only! A detailed description of the condition and possible equipment is provided upon request! Errors and prior sale excepted, sold to businesses only. All sales of used goods are subject to exclusion of warranty and/or guarantee. If you haven't found the forklift you're looking for, please contact us. We have a large selection of other units on site.

Condition: used, Year of construction: 2007, greates pass round over bed 650 mm Swing dia. over traverse guideway 420 mm Distance between centres 2.000 mm control Sinumerik Siemens slide travel X-axis 440 mm slide travel Z-axis 2.000 mm turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 33 / 27 / 22 kW transmission ratio 2 spindle diameter in front bearing 140 mm spindle bore 106 mm standard chuck diameter 250 - 400 mm spindle head DIN 55026 / A8 Dcjdpfx Aszp Rvloptjl turret head 12 pos. turning tool - shaft cross cut 32 x 32 mm rapid traverse X: 5 m/min rapid traverse Z: 10 m/min feed range X: 0,001 - 1.000 mm/min feed range Z: 0,001 - 2.000 mm/min power feed coss 9.000 N power feed longitudinal 12.000 N diameter of quill 100 mm quill travel 200 mm taper of center MK 6 total power requirement 38 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,0 x 2,5 x 2,0 m CNC - Lathe DMT KERN - CD 650 / 2000 - only 3,446 operating hours - incl. boring bar with holder for cross slide - incl. face plate 600 mm - incl. traveling steady rest max. 160 mm - incl. fixed steady rest max. 160 mm - incl. fixed steady rest max. 250 mm (not pictured) - incl. fixed steady rest max. 350 mm (not pictured) - incl. spare parts package - NO additional tools included

Year of construction: 1985, condition: refurbished (used), LATHE GEMINIS GE 650 -LENGHT 4200mm -HOLE 85mm -DIAMETER ON SLIDES 650mm Dcedjggly Sepfx Aptol -DIAMETER ON SUPPORT 400mm

Condition: used, mileage: 6,00,822 km, power: 488 kW (663.49 HP), first registration: 03/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space volume: 35 m³, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, Cab & Comfort Cab: FH16 Globetrotter XL (extra-high sleeper cab) * Seats: Comfortable driver's seat, air-suspended, heated, with seatbelt integrated into the seat; standard passenger seat, non-suspended. * Seat upholstery: Leather/textile mix, black/green/yellow. * 2 bunks: Rest package with two bunks, lower bunk foldable, upper bunk height-adjustable with safety net. * Air conditioning: Automatic climate control with multiple sensors and activated carbon filter, integrated parking air conditioning (I-Park Cool). * Windows: Electric windows (driver's side with automatic function), tinted windows, electric sunroof. * Sun visors: Interior, electric; exterior, on both sides. * Cooler box: 33 liters with freezer compartment under the bunk. * Storage space: Storage compartments at the rear/top, storage space under the bunk, drawer under the dashboard. * Additional comfort features: Leather armrests, leather door handles, curtains on windshield and windows, writing board for the steering wheel. ----Multimedia & Navigation * Infotainment: Media/infotainment system with navigation. * 8 speakers. * Radio with AM/FM and DAB/DAB+. * Bluetooth hands-free system. * USB and AUX connection. * Displays: Driver information color display (4 inches). * Second 9-inch touch display. * Navigation system: European maps. ----Safety & Assistance Systems Collision warning with emergency braking function. * Lane keeping assist. * Rear view camera (digital), heated lens, automatic lens protection. * Rain sensor for windshield wipers. * Immobilizer (transponder in key). * Smoke detector. * Black seatbelts (driver and passenger). * Brake lights with emergency brake flash pattern. * Electronic Stability Program (ESP). * ABS brakes. ----Lights & Electrical Light package Plus. * Bi-Xenon headlights. * LED fog lights. * Headlight cleaning system. * LED daytime running lights (V-light). * Work lights, side (2 front, 2 rear, LED white). * Marker lights, rear and side, with turn signal function. * Interior lighting with dimmer and red night light. ----Drive & Engine Engine: 16.1-liter diesel engine, 664 hp/488 kW, 3,213 Nm, Euro 6 with SCR, particulate filter, exhaust gas recirculation, two-stage turbocharger. * Transmission: I-Shift ATO3112F, automated 12-speed transmission with overdrive, reinforced. * Auxiliary drive: Gearbox-side, max. 600 Nm. Dodozi Rcropfx Aptjcl * Differential lock: Between axles and wheels. * Retarder: Compact retarder, gearbox-mounted, 450 kW braking power. ----Chassis & Axles Axle configuration: 6x2, hydraulically steered trailing axle, single tires. * Air suspension: Front and rear axles. * Steering: Single-circuit power steering, leather steering wheel, adjustable. ----Brakes Disc brakes, electronically controlled, with TCS. * EBS (Electronic Braking System), Medium package. * Automatic impulse parking brake. * Stationary trailer brake. ----* Rear view camera. * Central locking with remote control. * Dura-Bright polished aluminum wheels. * Exterior sun visor. * Auxiliary headlights. ----2nd Floor Pezzaioli livestock body, own hydraulic unit. * Hydraulic loading ramp (2-part). * Hydraulic loading ramp, side. * Feed flaps. ----* Tire dimension, front axle: 385/65R22.5. * Tire dimension, rear axle: 315/70R22.5. * Fuel tank: * AdBlue tank: 64 liters. * Technically permissible total weight: 19,000 kg. * Unladen weight: 14,800 kg. * Permissible trailer load: 24,000 kg. * Overall length: * Wheelbase: 4800 mm. * Next service due: / ----Vehicle number/Vehicle: 12259----Error

Year of construction: 2004, condition: ready for operation (used), X-travel: 200mm, z-travel: 650mm, W-travel: 750mm, swing diameter over slide: 265mm, center distance: 650mm, max. turning length: 650mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 7.2t, with documentation. Dsdpfx Aoldf Exjptjcl

Year of construction: 2016, condition: ready for operation (used), Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. Dcsdpfsirakgex Aptel

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,244 h, clamping force: 6,500 kN, screw diameter: 105 mm, total width: 2,300 mm, total height: 2,700 mm, overall weight: 20,000 kg, product length (max.): 8,000 mm, This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine. • Maximum injection volume: 4160 cm³ • Minimum mold height: 450 mm • Maximum mold height: 950 mm • Platen opening stroke: 1400 mm • Platen dimensions (W × L): 1510 × 1440 mm • Tie-bar distance: 1100 × 960 mm • Motor power: 161 kW • Heater power: 73.9 kW • Number of electrical connection pins: 32 • Injection nozzle radius (at tip): R35 Dcsdpfx Ajx Nr R Hsptsl • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Year of manufacture: 2013 • Operating hours: approx. 60,244 h • Condition: Excellent • Status: In production Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Dodpfxjxnzlho Aptscl Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: ready for operation (used), Year of construction: 2025, operating hours: 58 h, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640 HSCI, total height: 2,900 mm, total width: 2,650 mm, table width: 398 mm, table length: 398 mm, table load: 300 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, tool weight: 8,000 g, positioning accuracy: 0.005 mm, product length (max.): 2,900 mm, number of axes: 5, This 5-axis KUNZMANN WF 650 5AX was manufactured in 2025. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 40 tools. The machine has an impressive X-axis travel of 650 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 650 5AX vertical machining centre we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: TNC 640 HSCI • A-Axis Travel: +105° / -120° • C-Axis Travel: ±360° • Table Diameter: 398 mm • Maximum Spindle Speed: 12000 rpm • Tool Magazine Capacity: 40 tools • Rapid Feed X/Y: 25 m/min • Rapid Feed Z: 20 m/min • A-Axis Max. Speed: 25 rpm • C-Axis Max. Speed: 25 rpm • A-Axis Positioning Accuracy: ±5 arcsec • C-Axis Positioning Accuracy: ±5 arcsec • A-Axis Torque: 700 Nm • C-Axis Torque: 450 Nm • Control: HEIDENHAIN Conversational / DIN-ISO Programming Dcodozphg Iepfx Aptsl • Machine Configuration: CNC Swivel Rotary Table (A/C Axis) • Spindle Cooling: Liquid Cooled Motor Spindle • Operating Hours (Program Run): 58 h Accessories: • 19" Touchscreen • HEIDENHAIN HR 510 FS Electronic Handwheel • Automatic Tool Changer • External Coolant System • Internal Coolant Through Spindle (Optional) • HEIDENHAIN TS460 Probe Preparation • TT460 Tool Measurement Preparation • SE661 Probe Receiver Extra Information • Showroom Machine • 12-Month Warranty • Retrofitting and Commissioning Available on Request (Additional Cost) Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, Fully automatic flow pack machine for packaging products—regardless of their length—in a full wrap with no film overlap. Product feeding is carried out via a conveyor belt, which simultaneously folds the product into a centre-folded film using a forming shoulder. Product indexing is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted to different product widths. Longitudinal sealing is accomplished by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully operational. Dcsdjw U A Eqjpfx Aptol Technical Specifications - Cross sealing bar: 450 mm - Film: centre-folded film, approx. 12 - 80μm - Film roll outer diameter: max. 400 mm - Film roll width: max. 600 mm - Min. product length: 120 mm - Min. product width: 80 mm - Passage height: 200 mm - Working height: 780 – 930 mm - Power supply: 400 V three-phase current, 50 Hz with protective earth - Rated power: 3.5 kVA - Rated current: 5.1 A Tunnel passage width: 650 mm Tunnel passage height: 200 mm Viewing and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: excellent (used), DCN JetCook vessel500 litre 650 litres, direct from closed Babyfoods facility. Dcedpfx Aoy I Di Ssptjl

Condition: ready for operation (used), Year of construction: 2006, A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible. Dcodjy Igbqspfx Aptjl

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Dcodpfx Asyq R D Heptsl

Year of construction: 2023, condition: ready for operation (used), A Thielenhaus microfinish/superfinish machine for precision surface finishing of rotationally symmetrical components such as shafts, camshafts, crankshafts, and similar precision parts is available. Application range: shaft machining, max. machining length: 750mm, max. workpiece diameter: 100mm, max. travel: 650mm. Machine dimensions X/Y/Z: approx. 2100mm/1450mm/2050mm, weight: approx. 1800kg. Including SL50 belt finishing unit, Elbaron RON 60 SV oil mist extraction system, and workpiece holder. Documentation available. An on-site inspection is possible. The machine was used for sample machining and has hardly run. Dcodpfezcyqasx Aptsl

Year of construction: 1999, condition: ready for operation (used), A large-format injection molding machine Krauss Maffei is available. Clamping force: 6500kN, tie bar spacing X/Y: 1000mm/930mm, platen dimensions X/Y: 1530mm/1450mm, max. opening stroke: 900mm, mold height range: 350mm-650mm, max. platen spacing: 1550mm, ejector stroke: 250mm, ejector force: 110kN. Machine dimensions X/Y/Z: approx. 10000mm/2800mm/2450mm, weight: approx. 46000kg. Including a Wittmann handling unit. Documentation available. An on-site inspection is possible. Dcedszc Rd Dspfx Aptel

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Djdpfx Apsxr Nvcjtscl

Year of construction: 2012, condition: ready for operation (used), A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible. Dodpfx Apou Nlk Sjtscl

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Djdpoxwyvqsfx Aptjcl

Year of construction: 1999, condition: ready for operation (used), Offered is a continuous parts cleaning system for metal parts. Control system: conventional. Equipped with conveyor belt, integrated filter and pump units, control cabinet, steam damage extraction blower. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 4500mm/1600mm/2100mm. Inspection possible by arrangement. Dcjdpfx Aey Ulmxoptjl

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Djdpfx Aper N Rh Hotscl

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Dsdpougmx Aefx Aptocl