Stationary extraction system

Nestro

Condition: used, Nestro radial fan for extracting chips, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or small machine fleets and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Technical data: - Motor power: 7.5 kW Dodozrypmspfx Adrowa - Inlet: 300 mm - Outlet: 300 mm - Air flow rate: approx. 6,000 m³/h

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Dsdpfx Ajdxz Tpjdrowa Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles • Faster and more precise working compared to squeezy glue bottles

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery set, like new (in operation since 06/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12 x 18 m) Evolution 7450 vertical machining center Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024) consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquetting press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, each 7.5 kW (1 of which is new and in operation since 06/2024) Dedpfxozh Hw Ao Adrswa 1x Ayen multi-spindle drilling machine, custom-built, with a 2.5 m stop rail 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks, Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks, Cesab, including initial lift (year of manufacture 2025) Various workbenches, templates, pallet racking, material trolleys, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Benchtop drill press Stürmer Festool table saw Bosch large panel miter saw on stand EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, pictures and details of the individual items can be provided.

Condition: used, Year of construction: 1998, Used dedusting unit Year of manufacture: 1998 Note: The unit does not have a fire extinguishing system! Equipment and technical data: Dwjdpfx Ajznfpqsdrja - Volume flow: 3,530 m³/h - Suction nozzle: 250 mm - Filter surface area: 25.2 m² - Number of collection containers: 3 - Negative pressure: 2,500 Pa - Collection container volume: 480 l - Motor: 5.5 kW - Automatic cleaning - Filter category: H2 - CE marking: Yes Weight: 740 kg Availability: short notice Location: Flörsheim

Year of construction: 2014, condition: good (used), For sale: a Nilfisk compact safety industrial vacuum cleaner Type CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg Dwodjhu Sf Hspfx Adrsa Explosion-proof The vacuum cleaner is in good condition and ready for immediate use. Machine buying and selling WE BUY/SELL PRODUCTION AND METALWORKING MACHINES, AMONG OTHER THINGS. Do you need a high-quality, yet affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: used, 350 mm manual operated ja Dimensions (L/W/H) 1240x900x450 mm Used Item Features and Technical Specifications: - With manual switch lever, painted, sturdy - Connection diameter: 350 mm Dimensions: approx. 1240 x 900 x 450 mm Availability: available shortly Dedpszk N Ayefx Adrowa Storage location: 63934 Rölllbach

Condition: used, Second-hand extraction parts Pipes in standard sizes from 80 to 350 mm Branch pipes from 80-80-80 to 350-350-350 Elbows: 22.5°, 45° and 90° Electric valves Pneumatic valves Control systems Dwjdjzk Nlzspfx Adrsa All types of special components If you are interested in a quotation, please provide your detailed specifications Availability: immediate Storage location: Flörsheim

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM800 1,400 x 900 x 220mm ===== Dwsdpfx Adohun Uisrsa Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 7 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: used, Year of construction: 1997, Suction nozzle diameter: 200 mm Maximum volumetric flow rate: 3,200 m³/h Nominal volumetric flow rate: 2,862 m³/h Volumetric flow monitoring: Differential pressure display Negative pressure: 2,336 Pa Filter surface area: 16.8 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: dB Chip bag volume: l Filter cleaning: Pneumatic Motor power: 4 kW Dwsdpfx Ajx Edmvjdrea Machine length: 2,300 mm Machine width: 900 mm Machine height: 2,200 mm Weight: 350 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters Dsdoiamtpjpfx Adrswa 4 bags Filter area: 31.2 m² RH 3500 mm Fan: 5.5 kW Diameter: 250 mm, reduced to 300 x 240 mm Mounting brackets Feet Lid and filter hoses Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm Dwedexpn T Uepfx Adrsa > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: new, Year of construction: 2024, New dust extractor Djdpfx Ajy R E Uuedrewa Year of manufacture: 2024 Technical specifications: Certified according to BGHM H3* / CE / GS Power consumption: 2.2 kW Current draw IE2: 4.4 A Filter area: 9.5 m² Dimensions: 1575 x 910 x 2110 mm Dust bin volume: 1 x 160 l Weight: 405 kg Suction nozzle: 160 mm, right Operating air volume: 2300 m³/h Volumetric flow max/nom.: 1780/1447 Vacuum at nominal air flow: 2450 Pa Vacuum before fan at VNenn: 3160 Pa Maximum sound pressure level: 74 dB(A) Filter regeneration: pneumatic, max. 7.5 bar Operating mode: continuous operation Compressed air connection required Availability: short notice Location: Hochheim

Condition: good (used), Year of construction: 1994, functionality: fully functional, Nestro Dust Extraction System Dust Extraction Nozzle D = 160 mm Motor power 2.2 kW Filter area approx. 11.5 m² External dimensions L x W x H approx. 1350 x 860 x 1960 mm Weight approx. 240 kg One chip collection bin / approx. 185 l Max. rated volume flow 1780 m³/h Associated negative pressure approx. 2400 PA All information is subject to change. This information was taken from a brochure. Dwedozhv Nnepfx Adrea

Condition: used, Year of construction: 2004, machine/vehicle number: 02919475, - Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min Dsdpfev N D Ewox Adrswa - PLC control with touch screen - Number of spray guns installed 0 pcs. - Height-adjustable spray guns - Number of paint pumps 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Depth: 1.25 m Dedpfx Adszdddyerjwa Height: 2.42 m Weight: 1500 kg Stock number: 1143