Angled system

Okoma UF 3 S

Condition: excellent (used), Year of construction: 2023, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, Holz-Her Edge Banding Machine LUMINA 1380 Multi PUR & EVA adhesive (up to 60 mm) + NIR unit / laser edges up to 45 mm, as interchangeable station Jointing milling IntelliSet - tool correction Nsdpfx Aox E A Diodwjcl fa.s.t. - setup in the gap iTronic - pressure and glue quantity control Fully motorized equipment for all units Multi-function milling - radius 1.3 mm (2x) & 2 mm (2x) Spraying devices and more... The machine is currently being refurbished at the factory in Voitsberg, Austria.

Condition: excellent (used), Year of construction: 2009, CNC for complete processing of door frames / jambs , either or adjustable door frames in DIN norm Working width max 3.000 mm Working width min 480 mm Workpiece thickness max 98 mm Workpiece width max 280 mm Aggregates per side 2 Saw aggregates per side 1 diam. 400 mm Drilling supports per side 1 Drills per side 5 Aggregates longside 1 Nodpfx Adjw Sd Uujwjcl Milling aggregate with 2 spindles Aggregate tiltable in angle 45° Angle adjustment - programmable controller Width adjustment - programmable controller Conformity marking - CE mark Weight 2.500 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Ncjdpfetwz Tlex Adwol Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: new, Year of construction: 2025, flue capacity: 510 kW Conventional yeld capacity: 407 kW flue diameter: 250 mm hot air delivery pipes: 4 x 350 mm flue length: 1900 mm oven width: 900 mm oven hight: 900 mm air flow: 26000 m³/h power consumption: 4500 W aproximate surface to heat up: 8000 m³ area to be heated: 1800 m² heater height without hot air conveying pipes: 3000 mm Ncedjk Utrwspfx Adwol heater width: 1220 mm heater length: 2700 mm weight: 1575 kg

Year of construction: 1999, condition: repair required (used), machine/vehicle number: AL 1 / 99, Connection 9,0 kW 400 V Compressed air connection 6 bar suction 1x160 mm 3400 m³/h 30 m/sec Compressed air consumption 200 NL/min drilling spindles 9 pcs / 3000 rpm Ncsdpoiiy E Tsfx Adwjl grooving spindle 1 pc / 6000 rpm milling spindle 1 pc / 16000 rpm LxWxH 4050 x 2050 x 1900 mm weight approx. 1500 kg max. plate thickness 55 mm

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Nsdpowk D Efsfx Adwjcl Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: like new (used), turning diameter: 1,500 mm, MAXIMUM WORK DIAMETER : 1600 mm. MAXIMUM WORKING LENGTH : 3000 mm. Ncedpfx Adjr Ui R Nswjl DIAMETER OF LANTERN SHAFT : 83 mm. OUR MACHINE IS ACTIVE WITHOUT ANY PROBLEMS ALL REVOLUTIONS AND AUTOMATICS ARE IN VERY GOOD CONDITION

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Ncedpfxsmgc I Nj Adwel Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm Ncedpfsfn Nddjx Adwol depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, Year of construction: 2021, axis stroke (X,Y,Z) 4062, 2,922,660 mm Number of spindle head vertical 13 St. Number of spindles head horizontal 6 St. Number of tools 27 St. Number of milling agregates 1 St. working dimensions 3200,1500,200 mm Motor output 12 kW control BECKHOFF MASTERWOOD Project 385 (Winner) ----- Exhibition machine built in 2021, available immediately! 5-axis CNC machining center in portal design for use for Interior fittings, doors, stairs optionally expandable with solid wood clamps Frame processing and arched windows Short Summary: ----- Workspace: X = 3200mm ; Y = 1500mm; Z = 200mm 1 piece 5-axis high-performance spindle, 12 kW, with HSK 63 F mount 1 piece of permanently installed drill head with 19 spindles with 7 individually accessible vertical drilling spindles in the X direction with 6 individually accessible vertical drilling spindles in Y direction with 2 double horizontal drilling spindles in X direction and 1 double horizontal drilling spindle in Y direction Sawing unit integrated into the drill head 27 tool changing positions: Carousel tool changer with 22 positions and 102 mm grid spacing Linear 5-fold tool magazine for large tool diameters Original SCHMALZ tubeless work table. Console table with 6 traverses Workpiece lifting device Automatic tool length measuring device. Pack of 12 original Schmalz vacuum cleaners 114 x 140 mm height = 125 mm 1 piece Becker vacuum pump 100m3/h 1 piece chip conveyor belt Construction software Masterwork: 2D-Wop for standard application panel processing/interior construction, arches, doors Master 3D Level 2: for more complex processing, Optionally also expandable for 5-axis fully interpolating Prepared for the use of solid wood tensioners (round arches), Tensioner offered as an option if needed later Technology according to the enclosed, detailed description ----- Nodpfexmk Atox Adwscl Total price in this version from the Oberkochen warehouse: on request! ----- Freight and commissioning on request! Options for frame production/round arch with additional costs: ----- Reference ring for holding chip guide elements on 5-axis electrospindles with HSK 63F mounts: 410.00 euros Basic kit for clamping arch elements - 6 pneumatic tensioners with two movements for arch elements: 7,090.00 euros (technical information according to the manufacturer - no guarantee!) Chip guide elements, price per piece: 460.00 euros All prices mentioned are net, plus tax. (technical information according to the manufacturer - no guarantee!)