OTT 300/125

OTT 300/125

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization Rbodjidi Ivspfx Adbet

Condition: new, Year of construction: 2024, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Rbedpfepgkmwex Adbet Motor power: 5,5kW fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa knife shaft 4 knives Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) Rsdpfx Aowcqr Aedbebt - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Condition: excellent (used), Steton PF 530 E. Electric adjustment of the planing height -working width 53 cm -Ters knife shaft - length of the tops 275 cm Rbedjipx Uqopfx Adbjt -motor power 4kW / 380V -resistance set at an angle -electric brake The machine is in very good condition, runs quietly.

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Rodpfswa Ax Ajx Adbobt Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest.

Condition: new, Year of construction: 2024, planing width: 410 mm, TECHNICAL DATA Redpfoqk Ulujx Adbebt Planing width 410 mm Feed table length 1620 mm Feed table length 1170 mm Total table length 2850 mm Cutterblock speed 5000 rpm Suction nozzle Ø 160 mm chip removal up to 8 mm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 870 kg TECHNICAL DESCRIPTION Solid German engineering For planing and jointing incl. hollow and pointed joint adjustment for planing width up to 630 mm and max. chip removal up to 8 mm Ergonomic working position directly on the cutterhead PANHANS solid steel cutterblock ø 125 mm with 4 Tersa reversible knives Finely planed machine tables, total table length 2850 mm Top control panel at eye level with digital display of chip removal, current delivery table situation (neutral, hollow or pointed joint), incl. template holder and practical tool tray Electromotive adjustment of the feed table via push-button Hollow and pointed joint adjustment on the feed table Toothed table lips for noise reduction Dressing fence Adjustable in depth and inclination via single-lever operation, inclinable up to 45°, mounted in extremely smooth-running steel guide Anodized dressing fence ruler Pivoting auxiliary fence 1545 Console for feed unit TXF 1570 bridge guard with hinged cover Mechanical motor brake Automatic star-delta start, motor protection switch Planed in at the factory CE-compliant GS tested

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Rbsdpfsu Hlzfjx Adbjt Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: used, Technical data: Max planing width: 530 mm Rbjdpfx Aegykh Hjdbot Number of knives: 4 Total length of the tops: 2730 mm Electric height adjustment of the tops Culaga tilting Safety switch Power supply 400 V Engine power: 4 kW Producer: Steton Overall dimensions: Length: 2730 mm Width: 1040 mm Height: 1040 mm

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,350 mm, The HSM is the precision surface sanding machine tailored to the needs of small and medium-sized craft and industrial businesses. Whether for effect sanding, cross sanding, lacquer or high-gloss sanding, for panels, solid wood, or veneered workpieces – the Heesemann HSM is the perfect sanding machine for the trade! The surface sanding machine is particularly attractive for joiners and interior fitters. The HSM is available in predefined standard configurations, equipped with two, three, or four units, and can be fitted with a cross belt for cross sanding applications. Rsdpsw Db Drofx Adbjbt Units and features can be selected individually. We are happy to provide you with a customized offer.

Condition: used, total width: 1,300 mm, total length: 2,600 mm, total height: 2,000 mm, overall weight: 2,800 kg, pressing force: 65 t, opening width: 300 mm, cylinder diameter: 80 mm, transport width: 1,300 mm, space requirement width: 1,300 mm, space requirement length: 2,600 mm, transport height: 2,000 mm, transport length: 2,600 mm, space requirement height: 2,000 mm, empty load weight: 2,800 kg, plate width: 1,100 mm, table width: 1,100 mm, table length: 2,200 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Rbjdpfsyfw D Aox Adbot Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse