Board sorting plant

Paul

Condition: excellent (used), functionality: fully functional, - Paul 15 AO under-table crosscut saw Well-maintained machine with low operating hours - Hydraulic saw stroke - 150 mm cutting height - Approx. 590 mm max. cutting width Hjdoyf Uppjpfx Aameh - Left roller conveyor 2 m with 3 pneumatic stops - Right roller conveyor 4 m

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: Hjdpfx Aasihpn Njmeh SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: used, tank capacity: 270 l, GENERAL Design: vertical Remarks: Handhole diameter approx. 260 mm (handhole cover plated); deposits and metallic discoloration inside the vessel Internal diameter: 690 mm Hedeyciydspfx Aamsh Total height: 2,120 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Volume: 270 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 670 mm Last intended use: biochemistry VESSEL Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: handhole Outlet: 52 mm MATERIAL SPECIFICATION Flange material: steel Foot material: steel

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 8293250, Multi-blade saw PAUL K 4 G/1200 - Model: K4G/1200, - Year of manufacture: 1982, - Machine number: 8293250, - Working width: 1200 mm, Hjdpoyfh I Sofx Aamsh - Infinitely variable feed speed: 2–48 m/min, - Maximum saw blade diameter: 270 mm, - Installed power: 33 kW, - Machine in operation. Good condition.

Condition: ready for operation (used), Tilt destacking for layer separation Stacking lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before feeding unit Hedpfxsuzht Tj Aameh Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Condition: refurbished (used), C11 MKL Cross-Cut Optimization Line, offered by Wood Expert Industry, is a state-of-the-art technological solution designed specifically for industrial wood processing and operational workflow optimization in woodworking facilities. All equipment comprising the processing line is manufactured by Paul Germany and was completely overhauled in July 2025 with zero operating hours. Paul C11 MKL Lumber Optimization Line Components - 9.0 m / 230 mm Inclined Conveyor Belt Ideal for the automatic and efficient handling of wood pieces towards the processing area, equipped with a guided belt and robust clamping parts for stable transport. - Measuring Station with Luminescent Scanner and Photocell Allows precise identification of the start and end of workpieces, featuring dedicated lower rollers for high-accuracy measurements. - Pressure Roller Unit Ensures correct alignment and pressing of pieces between 250 and 4200 mm, with manual adjustment available according to the material thickness. - Reinforced Marking Rails, Left and Right Automatically pre-marks cutting positions for increased efficiency and accuracy in subsequent processing. Hjdpfxew Emf Ro Aameh - C11 MKL Optimizer – CNC Cross-Cut Saw Station Includes a robust welded steel frame, 500 mm TCT blade, 5.5 kW servo-driven motor, variable speed, and an advanced feeding system with lower/upper rollers for precise piece guidance. Electric adjustment of the upper rollers allows automatic adaptation to wood thickness. The system features automatic waste extraction, extraction ports, CE safety compliance, and advanced cutting quality options (blade with 132 conical teeth). - Waste Extraction System Comprises an 11.5 m / 230 mm conveyor belt and ascending waste belt (3.0 m / 500 mm with collection hopper), optimizing material flow and disposal of residues. - Length Sorting System With pneumatic ejectors and basic sorting equipment, this facilitates automatic organization and discharge of pieces to two outfeed positions, increasing line productivity. - Maxi8 Premium Operator Terminal and Optimization Software 17” touchscreen terminal, dust-protected, remote diagnostics, Linux-based, with dedicated optimization software (up to 60 cutting lists, 9 grading options, 400 preset lengths/list), advanced statistics, network integration capability. Includes data import/export options via USB. - Control and Automation Equipment Standardized electric cabinets, control panels, complete installation and wiring performed with high-quality components for intensive industrial use. Benefits of integrating this line: - Fully automated cross-cutting process, significantly reducing human error. - Increased efficiency and yield through cutting list optimization and automatic length sorting. - Adaptability to various thicknesses and sizes of workpieces. - Advanced digital control and remote diagnostics for quick interventions. - High reliability, reduced maintenance costs, and adherence to strict CE safety standards. This optimization line can be customized for different types of wood processing facilities, ensuring efficient operation tailored to every client’s requirements.

Condition: used, Two roller tracks from Paul suitable for underbench cabinet saw AO or similar machines. Roll width: 56 cm Roller conveyor length 1: 340 cm Hsdpfx Aaeyarm Ujmsh Roller conveyor length 2: 190 cm

Condition: new, IMH-OBC-Optimized block saw Cuts blocks for four-way pallets. How does the machine work? The block material is loaded onto the chain conveyor and transported to the pusher, which feeds it to the cutting zone. The block material is measured by the machine before cutting and it also calculates which lengths need to be cut in order to optimize usage and produce no waste (or as little waste as possible). The machine can process 4 different block lengths in the same pass and each block can be optimized separately. Optionally, the machine can be equipped with a double drive, which enables the simultaneous processing of two different block materials. block materials at the same time. The feed chain and the circular saw blade are driven by a standard electric motor, while the linear module is driven by an AC servo for optimum performance and precision. The measuring arm, the material holder in the saw and the air blower are pneumatically operated. The machine is controlled and monitored by its own PLC via a control panel. The machine is designed for continuous and reliable processing of pallets. It combines professional precision with a user-friendly set-up. Changeover time 1-5 minutes Block length 75 mm* 45 blocks / min * Block material length 3 900 mm or longer. Block: Hedpferkk Udox Aamjh 75-150 x 75-150 x 75-100 mm ( length x width x height ) Squared timber material: 800-5800 x 75-150 x 75-100 mm ( length x width x height ) This machine is available in different versions. IMH has various additional machine modules that can easily be added to existing machines to achieve a higher degree of automation. This is just one example of the many possibilities that can be realized with IMH machines. Since 01.01.2024 we have taken over the exclusive representation for IMH machines in Germany. The range includes high-quality machines for pallet production that are known for their quality and reliability. Please contact us to find out more about IMH machines or to arrange a personal consultation. Gebrüder Göbel - your partner for IMH machines in Germany. We look forward to supporting you with your projects!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 89 mm, cutting width (max.): 200 mm, Optimizing cross-cut saw Hsdpjx H Uaxefx Aamjh PAUL C11 MKL Year of manufacture: 2014 The machine is equipped with a measuring station and 5 ejectors. Technical specifications: Cutting height: 3 - 89 mm Width: 30 - 200 mm Minimum workpiece length: 300 mm Saw blade diameter: 500 mm Saw motor power: 5.5 kW

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; Hsdpfxsirmule Aamoh 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009

Condition: refurbished (used), Year of construction: 2010, Used Wiedemann 900 debarking machine for sale. Feed speed 20 m/min, rotor 30 kW. The machine is currently available ex works Untersteinach; upon purchase, the machine will be fully refurbished and newly painted at the factory. Price on request. Hodpfxow I Si Ss Aamoh

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 99-908.06, feed rate X-axis: 199 m/min, working height: 100 mm, Crosscutting System PAUL Model 14 Year of manufacture: 1997 Saw motor: 7.5 kW Feed motor: 4 kW Driven lower rollers: 6 pcs Non-driven upper rollers: 6 pcs Minimum cutting time: 0.2 sec Max. feed speed: 3.33 m/sec Cuts per minute: 120 Min. infeed length: 300 mm Max. infeed length: 7000 mm Max. timber thickness: 100 mm Timber width: 380 mm Min. timber cross-section: 12 x 40 mm Max. timber cross-section: 45 x 380 / 100 x 200 mm Max. timber weight: approx. 70 kg Min. fixed length: 140/30 mm Infeed conveyor: 5200 mm Outfeed conveyor: 6100 mm with 4 ejectors (1000 mm, 500 mm ...) Hedpjybbnqofx Aamjh Max. stock length: 5000 mm Video of the running machine available upon request.

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Hedpfjiimz Aox Aamjh

Condition: refurbished (used), Complete set of debarking knives for Valonkone VK26M Hedpjq A Ic Ajfx Aameh consisting of: 4 pre-cutters 4 main cutters *Incl. metal box

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) Hsdpfxsx S Ix Es Aameh - belt width: 510mm table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)