Universal folding machine

RAS 67.30

Condition: used, sheet width 3200 mm plate thickness 2,5 mm weight of the machine ca. 3,5 t Bjdpfx Aer Ngtfsktjlp Tools recentely grounded. Bending angle preselection via potentiometer

Condition: good (used), functionality: fully functional, Year of construction: 2005, Hydraulic Swivel Bending Machine Manufacturer: TENSOL, Type: H200.60 Year of Manufacture: 2005 Technical Data Manufacturer: TENSOL Type: H200.60 Year of Manufacture: 2005 Usable Length: 6000 mm Capacity: 2 mm Motor Power: 7.5 kW Dimensions: approx. L 7.00 x W 1.60 x H 2.20 m plus hydraulic unit (1.1 x 0.7 m) Weight: approx. 8 tons Equipment • 2D graphics control • Automatic sheet thickness adjustment • Controlled rear stop, 1000 mm • Overhang 1050 mm • Automatic roller shear • Bending rail 10 mm • Reinforcement rail 15 mm All information is without guarantee. Bjdpfjzumhhox Aktolp A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Bodpjy D Rxrofx Aktelp Technical Data: - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: new, Year of construction: 2025, Profile machine MZP-02 2m The MZP machine is used to corrugate sheets to ensure stiffness of thin sheets in the ventilation duct sector. Rolls made of high quality steel can roll 2mm aluminum sheets and 1.2mm black steel sheets. The machine is equipped with transport wheels that allow you to quickly change the location of the machine in the workshop. Machine Specs: Engine with editor Chain driven roller system Fully welded construction Transport possible thanks to the wheel The pressing force can be easily adjusted with the help of adjusting screws Adjustable intermediate distance between the upper and lower shafts The lower and upper rollers are made of hardened long-life steel A practical machine that can be used by people operating in the ventilation industry for many years. Technical specification MZP-02 2000 Working length: 2000mm Range of processed sheets: 0.40 / 1.20mm Engine power: 0.37kW Length: 2240mm Width: 530mm Bsdofwxm Djpfx Aktjlp Height: 1050mm Weight: 360 kg

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Blodpfx Akox Av Uajtjp

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. Bledpfsuzv Tzex Aktop As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Year of construction: 1984, machine/vehicle number: 220-3, Ref. No. 25304 Technical Data: - Machine for producing longitudinal seams on the edges of square or rectangular long ducts - Number of roller shafts with seam rolls: 15 pcs - Material thickness: from 0.5 to 0.63 mm - Duct dimensions: from 80 x 80 mm up to 100 x 100 mm - For duct dimensions from 100 x 100 mm - Material thickness: 0.5 to 1.0 mm - Feed speed: 15 m/min - Pneumatic connection Bledpfjw U Rb Hsx Aktep - Drive: 400 V / 3 kW - Includes: - Foot switch - Duct guide plates - Separate lubrication system - Space requirements: approx. W 5400 x H 1200 x D 800 mm - Weight: approx. 950 kg

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Bsdpfx Aszhm Nfjktolp Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment Bedpfoyk Dicex Aktolp - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operator's manual

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Bljdpfx Ajttc Uaoktsp