Transversal construction

Rex Pinneberg

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Ijdsdy Hm Njpfx Ab Ioa Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: new, Year of construction: 2025, CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. EASY TRANSPORTATION & QUICK ASSEMBLY (2 hours) *MINUMUM INVESTEMENT FOR GROUNDWORK GENERAL TECHNICAL SPECIFICATIONS Plant Type : Mobile Concrete Batching Plant - PLANETARY MIXER Plant Capacity : 30 m³/ hour freshly compressed concrete Mixer Capacity : 750/500 lt (0.5m³ Compressed Concrete) Ijdjhzu N Iepfx Ab Iea Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The following machines, all in very good condition, are available for sale – perfectly suited for professional use in the wood processing industry. Saw line consisting of: • Feed unit ZV21, model EV 50 • Profiling chipper ZD31, model VM50 • Outfeed unit AV31, model VZM • Centering device VZ21, model VZV • Log rotation device DV21, model DV70-2 • Infeed and centering unit EVP • Profi Chipper VM50 • Profiling unit VMP450 F61 (4x110kW) • Microtec measuring system Isdpfx Asw Stiusb Ija Additionally available Other used woodworking machines ?️ Also available: Additional used woodworking machinery Log infeed Springer  • 5-arm design  • Log distributor (5-arm)  • Receiving tipple transfer (26 m) Log rotation device LINCK DV35/DV1 (new)  • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H)  • Weight: approx. 1.5 t  • State-of-the-art rotation technology for precise positioning 2 units chipper infeed – infeed and centering unit EV30  • Dimensions: 5.5 m x 2.2 m x 2.1 m  • Weight: 8 t each Separator conveyor  • Dimensions: 8.6 m x 2.0 m x 2.6 m  • Weight: 7 t 2 units LINCK chipper V30 (incl. spare chipper discs)  • Dimensions: 5.5 m x 2.3 m  • Weight: 11 t each Saw VS 66 – left & right side  • Dimensions: 2.8 m x 2.1 m x 2.5 m (each)  • Weight: 3 t each LINCK pre-centering unit  • Dimensions: 3.0 m x 2.0 m x 1.1 m  • Weight: 0.8 t Log infeed with loader and log conveyor Location & Availability All machines are located at our warehouse, A-3525 Lugendorf No. 38, and are available immediately. Price upon request For further information or to arrange a viewing appointment, please do not hesitate to contact me.

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) Isdpfehw Ng Ijx Ab Ija N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use Isdpfx Ajfg E Hljb Iea • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Iodpsh Ayyqofx Ab Iea Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Year of construction: 2001, operating hours: 123 h, condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Iodpfxeftdv Ue Ab Isa Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary.

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Isdehlp Efepfx Ab Ija

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units Isdpfxjdfgg Io Ab Isa D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, year of last overhaul: 2022, A complete BSH production line is for sale. The plant consists of components from System TM (feeding section), Keilzinken Technik NKT, HIT automation (multi-level storage, transport, lamella feeding repair station, planing and Kallesoe, etc.). Planing machines from REX: pre-planer, lamella planer and finish planer. High-frequency press from Kallesoe. 2 silos. Ijdpfxswgcchj Ab Ija