Wide belt sander

SAC

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 Tedpox Nrvvefx Abteb - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Perske, multi-spindle drilling head with drive -Drilling head: 18 spindles -Drill spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm Todpsvmw H Ajfx Abtob -Collets: Ø10 mm -Number: 2x multi-spindle drilling head with drive available -Price: per piece -Dimensions total: 800/200/H575 mm -Weight: 67 kg/piece

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Tjdjudxchepfx Abteb Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 1994, Belt height: 150 mm Belt length: 2280 to 2290 mm Belt speed: 22 m/s Two-sided sanding with oscillation Drive mechanism Veneer sanding mechanism Tedpfx Aezd Hngsbteb End-face sanding / radius sanding with a small support table Surface sanding with a tilting table Belt direction: right/left Location: Nattheim

Year of construction: 2004, condition: ready for operation (used), Tenoning machine manufactured in 2004. This SAC T4TL features a spindle length of 640 mm and a tilting table designed for tenoning and squaring. If you are looking to get high-quality tenoning capabilities, consider the SAC T4TL machine we have for sale. Contact us for further details. • Spindle Length: 640 mm Tedjzug Emspfx Abtob • Tenoning Machine • Working Table: Tilting table for tenoning and squaring

Condition: used, functionality: fully functional, On offer: SAC RTE 1000 wide belt sander, with pressure shoe The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its ability to calibrate and precisely finish-sand. The unit with a hard rubber roller is responsible for leveling the surface, and the pneumatic pressure shoe with a "creep feed" function allows for precise finishing of the component. The two-speed motor and two conveyor speeds allow the operating parameters to be adjusted to the material being processed. Specifications: • Manufacturer: SAC • Model: RTE 1000 • Working width: 1000 mm • Maximum height of the workpiece: 165 mm • Number of sanding units: 2 • One combined unit: hard rubber roller, 160 mm diameter + pressure shoe • Pneumatic pressure shoe with "creep feed" function • Main two-speed motor: 10 / 12 kW • Number of conveyor speeds: 2 Tedpjzvuy Ijfx Abtjb • Electric adjustment of the work table height • Abrasive belt blowing system • Abrasive belt dimensions: 1900 × 1000 mm • Dust extraction port: Ø200 mm • Overall dimensions: 145 × 210 × 190 cm (L × W × H, without the guard) Applications: • Calibrating and leveling solid wood components • Sanding panels and glued components • Inter-operation sanding • Precise finishing sanding using the pressure shoe • Processing components with a width of up to 1000 mm and a height of up to 165 mm • Preparing surfaces for lacquering, oiling, or further processing Additional information: • The photos show the actual condition of the machine being offered • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-community sales with a VAT rate of 0%; for domestic sales, 23% VAT will be added. Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of transporting the machine.

Condition: used, Year of construction: 1991, Planing width: 530 mm Planing height: 240 mm Minimum planing height: 1 mm Todpfxjzi Auge Abtob Maximum chip removal: 8 mm Diameter of cutterhead: 120 mm Speed: 5000 rpm Cutters: 4 pcs Motor: 4 kW Feed rate: 5, 7.5, 10, 15 m/min Table dimensions: 960 x 530 mm Dust extraction port: 140 mm Weight: approx. 970 kg Location: Customer

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, Colour: Grey Weight: 820 kg Dimensions (LxBxH): 105 x 125 x 125 cm - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 Todpfxjwnhyze Abtsb - Planing shaft speed [rpm]: 5000 - Planer block diameter [mm]: 120 - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Technical specifications: Spindle diameter: 35 mm Spindle height: 160 mm Spindle rotation: left/right Electric spindle height adjustment Tilting spindle Adjustable cross-slide arms Dust extraction port: 120 mm Motor power: 5.5 kW Power supply: 380 V Manufacturer: SAC Overall dimensions: Length: 1120 mm Tsdpfjzilp Hjx Abtob Width: 1070 mm Height: 1040 mm

Condition: used, Year of construction: 1988, Spindle swivels: Yes, -5 to 45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height indicator: scale Swivel angle indicator: scale Milling stop indicator: scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 8000, 10000 Motor power: 6 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1,200 mm Tedpjzq Dc Ijfx Abtob Machine width: 1400 mm Weight: 1100 kg

Condition: good (used), Year of construction: 1994, Oscillation ja ja / nein Todszfqkzopfx Abtjb ja ja/nein ja ja/nein tiltable up to 30 Grad Motor output 2,8 kW Table dimensions 850 x 300 mm sanding width 150 mm Weight 330 kg