Oscillating drill

Samco

Condition: used, functionality: fully functional, Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Lsdpfx Adeycpz Uowjrg Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Ledpfx Asmgc I Nedworg Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: used, Year of construction: 1987, Wide Belt Sander Manufacturer: Samco Lrsdpfxexdnrgs Adwjg Model: EG Year of manufacture: 1987 Sanding length: 3,000 mm Includes spare belts 21126

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW Lrjdpfx Asu Szfuedwog weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open *

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: Lsdot R T Hcjpfx Adworg 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Slot mortising machine SAMCO AS 16 - used - Movable motor, Dowel drilling device ----- Technical data ----- Worktable dimensions: 550 x 285 mm, Lodpfjw Nv Nxox Adwsrg Drilling width: 190 mm, Drilling depth: 120 mm, Speed: 2,840 rpm, Motor: 1.5 kW, Weight: 220 kg

Condition: excellent (used), Here we offer you an Omron SCARA industrial robot. Omron SCARA Industrial Robot with PB Programming Box R6Y XGL400 XG Series SCARA robots for industrial applications: - Higher reliability (no belts on XG series, no moving electronic parts). - High precision and speed - Minimal maintenance - Ease of use - High rigidity - Very compact design Lsdpfjh H D Rtsx Adwsrg SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Max. Payload range: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Technical data: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: +/-0.01 mm R: +/-0.004 Axis specifications: Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis +/-140 º Y-axis +/-144 ° Z-axis -- ° R-axis +/-360 ° Type: R6Y XGL400150 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Ledpfx Aod Rzc Rjdwerg

Condition: excellent (used), Working range 850 mm 0.12 kW motor Ledper Ha Ufsfx Adwsrg Very good condition.

Condition: excellent (used), Belt dimensions 150 x 2170 mm Two belt rotation speeds Lsdpfx Aepq R Uajdwerg Adjustable boot Both upper parts are adjustable at an angle of 0-30 degrees Adjustable grinding height

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm Lredenl Nqqjpfx Adwsg engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm Lsdpfx Adsxzl Aqjwerg - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Technical Data: Work Table Dimensions: Electrically adjustable table height Lsdpfx Aewxtiiedwerg Belt guard Pressure device Wheel diameter: 195 mm Extraction port: 2x120 mm Horizontal table movement Built-in fan Power supply: 400 V Belt sander motor power: Overall Dimensions: Length: 2000 mm Width: 4400 mm Height: 1600 mm

Year of construction: 1998, condition: excellent (used), I sell the window production set: Ljdjfzzhyspfx Adworg 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good !

Condition: ready for operation (used), 6222 SAMCO LONG-BELT SANDER Table length: 2930 mm Table width: 800 mm Motor power: 4 kW Electric table height adjustment Power supply: 380 V Belt width: 150 mm Lodpfx Aeu Sr Txodwerg Spring-loaded belt tensioning Right/left rotation