Spindle moulder

SCHNEIDER SK 2/4 II

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Dodpsxqp Ngefx Addecr

Condition: as good as new (ex-display), A demonstration metal band saw machine with base, quick clamping device and coolant device. Cutting range round/ rectangle/ flat 90° 220/ 220x220/ 250x155mm round/ rectangle/ flat 45° 160/ 160x160/ 160x100mm round/ rectangle/ flat 30° 100/ 100x100/ 100x85mm Cutting speed 32/ 66m/min Further Tech. Data see pdf. Document Tech. Date and dimensions: Errors excepted. Dsdpfx Aopgmkyeddscr

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters 4 bags Filter area 31,2 m² RH 3500 mm fan 5,5 kW Dodpeiamtpjfx Addjcr diam. 250 mm on 300 x 240 mm Brackets Feet Cover and filter bags Unfortunately, we cannot answer inquiries without complete contact information.

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen Dcedpfst Hagnex Addor

Condition: good (used), functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile Dcodpjvzghrjfx Addjr second hand machine spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000

Condition: excellent (used), mandrel diameter: 30 mm, Equipment: motor brake, Table milling machine SCM type T130 with four roller feed unit, table size 1200x730mm, max. Speed 10.000/min, spindle D=30mm. Motor 5.5kW A spindle D=40mm can also be supplied at an extra charge. Dcjdpst Rfn Esfx Adder

Condition: not inspected (used), Year of construction: 1981, functionality: unexamined, machine/vehicle number: 3124, Trimming saw Esterer DKV-5S year of construction 1981 55 KW saw motor Djdpouy Ib Ijfx Addecr with ASV/B pull-out system year of construction 1981

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 4,717 h, load capacity: 2,000 kg, lifting height: 4,700 mm, load center: 500 mm, fuel type: gas, mast type: triplex, power: 38 kW (51.67 HP), motor manufacturer: Toyota, gearing type: hydrostat, DGUV certified until: 12/2024, fork length: 1,200 mm, empty load weight: 3,610 kg, Equipment: CE marking, cabin, full service history, lighting, pallet forks, sideshift, trailer coupling, Toyota Tonero 2t LPG Forklift with Weighing System Ref: 10051 Year of manufacture: 2007 Operating hours: 4,717 h UVV inspection & maintenance: 12/23 at 4,694 h by Toyota Weight: 3,610 kg Length: 3,395 mm Width: 1,155 mm Height: 2,085 mm Load capacity: 2,000 kg Load center: 500 mm Lifting height: 4,700 mm Fork length: 1,200 mm (forks are new) Mast: Triplex with full free lift Fork carriage: Sideshift Engine: Toyota 4Y ECS Engine power: 38 kW Front tires: 21x8-9/6.00 Rear tires: 18x7-8/4.33 Equipment: - Factory-fitted weighing system (digital display) - Multifunction display in the dashboard - Sideshift - Road lighting / work lights Dcjdpfxeumk Tls Addjr - Toyota SAS (System of Active Stability) - Adjustable steering column - Grammer MSG65 seat - Semi-cab with roll-up weather protection on the right - Front and rear windows including wipers - Documentation The machine can be demonstrated on site by arrangement. All information without guarantee. Subject to errors and prior sale.

Condition: ready for operation (used), Technical characteristics En cours de vérification Double roller carriage length: 3000 mm 5.5 kW motor 4 rotation speeds : 3000, 4000, 5000 and 6000 RPM Scoring unit 0.75 kW Parallel fence with fine adjustments 1200 mm Dcjdpfxjuciqae Addor Tilting blade ⌀ 350 mm (max 450 mm) Automatic centralized lubrication for blade pivoting Cutting height : 100 mm (max 150 mm with 450 mm blade) Cutting height at 45° : 70 mm (max 106 mm with 450 mm blade) Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7 Kw Motor: 7,5 CV Overall dimensions

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, Power rating 380V Planer block motor 4kW 8.3A Dedpfxov Up R Aj Addscr Feed motor 1x0.37kW 1x0.55kW 2x feed speeds 7 + 14 m/min Star-delta switch Planing thickness adjustable with hand crank Planing width 510 mm Leitz reversible cutter block with 2 knives 2 table rollers Extraction connection 140 mm