Strip leveller

SCHNUTZ RM 63/19/1600

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Hnedpfx Aorgzv Neh Sst Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C air conditioning 16,850 kg 91 kW Top condition Hedeyltr Ajpfx Ah Sont

Condition: excellent (used), bore depth 500 mm spindle speed: 1 Hnedpexx A D Tofx Ah Sjt

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, spindle motor power: 30,000 W, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm • Control: Okuma OSP P300L (OSP Suite), 15" screen • Configuration: Main spindle (left) + sub-spindle (right), Y-axis, turret with driven tools (radial tool mounting) • Max turning diameter: 340 mm • Spindle speeds: • Left (main): 42–4,200 rpm • Right (sub): 50–6,000 rpm • Spindle motors: • Left (main): PREX 30/22 kW • Right (sub): PREX 11/7.5 kW • Special main spindle (“Big Bore” option): Ø91 mm, nose JIS A2-8, 42–4,200 rpm, PREX 30/22 kW, max torque 700 Nm • Control/monitoring functions: • Spindle orientation • Cutting load monitoring (“Load Monitor”) selectable for all axes and spindles • One-Touch IGF M-E conversational programming • Tool life monitoring: by workpiece count, by cutting engagement time, by cutting load; automatic sister-tool change or stop/alarm if no replacement • Machine options: Additional flushing for left slideway covers Additional equipment • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets • Workholding (chucks) Hnodpfxsx D Rvns Ah Sst • SMW‑Autoblok BBD250‑77 / A8, hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder VN170‑77, drawtube ID 72 with cylinder flange • Max speed: 4,000 rpm; bar capacity: Ø72 mm • Kitagawa B206 (Ø170 mm), hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder SR1146, drawtube/cylinder flange, ejector • Max speed: 6,000 rpm • Part handling • Part catcher, swing-bucket type, Ø80 × L150 mm, max 5.8 kg • Chip management • Cromar chip conveyor for LB3000 EX II C1000, slat type, right-hand discharge • Bar feeding and interfaces • Bar feeder interface (OSP P300L) • IEMCA KID 80+ bar feeder (SX – Left) for Okuma LB3000 EX II • Includes: 7" touchscreen HMI, mechanical/electrical interface kit, additional light kit, roller guide kit for round/hex bars, spindle extension, bar pusher D=26 mm, bar pusher D=15 mm, paper manuals • Accessories: Floor frame for longitudinal movement in Z; spindle liner/reduction tube Technical Specification Counter Spindle Yes Driven Tools No

Condition: good (used), Parts shown by hand not come. Hnedpeyb R Ersfx Ah Sot

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) Hnsdox D Di Ujpfx Ah Set • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Hedpfx Ahowpku Ds Sjnt Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: used, Year of construction: 2024, x-travel 400 mm y-travel 400 mm z-travel 375 mm control Siemens 840D sl Linear Hnsdpfx Aszvhm Ish Sot

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Hjdpfxoxv Av Re Ah Sent Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: new, Year of construction: 2026, -Tfon Leveltech® S-3513 Leveling Machine. -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. -Key Specifications: Material Thickness: 0 – 0.3 mm. Hnedpskyrzljfx Ah Sjt -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled. Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg.