Edgebander

SCM K360

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM Kodpfx Afjrx S Ipeajwu - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Kjdpfx Aed H Sc Eefaowu Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: Ksdpfsx Dcn Nox Afaswu - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Kodpfx Afotu R Sdsajwu Weight: 1428 Kg

Condition: new, Technical data: Working width: 1100 mm Sanding belt dimensions: 1120x2150 mm Max working height: 160 mm Calibrating steel roller with a diameter of 150 mm Rubber roller with a diameter of 150 mm Sanding pad width: 50 mm Common motor power of 2 grinding aggregates: 11 Kw Kwsdpfx Afjgtm U Aoaou Speed of sanding belts: 16/18 m / s. Feed motor power: 0.55 kW Infinitely adjustable feeding belt: 4-20 m / min Worktable motor power: 0.25 Kw Pneumatic shoe for jump / jump: YES

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Branded machine in very good condition, Kwjdpfx Afov S Hy Ajaju

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Ksdpfx Afjdqzcxsaswu Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width Kwjdpfxjrigxyo Afaeu 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, length of the machine 415cm machine checked in original condition

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit Kwedpfx Afod Inktsaju - scraper - buffing unit

Condition: new, Year of construction: 2026, Technical specifications: Kodpfx Aed H Rf Tsfaewu • Extraction capacity ~ 5200 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 250/200mm • Filter area 13.7 m2 • Speed 28m/sec. • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System)