Edgebander for solid wood

SCM Olimpic S220

Condition: used, Year of construction: 2014, power capacity 3 kW Giodpfjh A Sfdex Abhjp feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Gjdpfxevwfqqe Abhoip

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system Godpfx Abowka Upehoip - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Gedomt Hhwspfx Abhjip Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Gedpfswlbxlsx Abheip Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: new, Year of construction: 2026, CORMAK PBM290 horizontal drilling machine is a professional device created for efficient wood machining. It is equipped with advanced solutions ensuring perfect quality of finished products. Machine features high-quality guides, providing easy table height adjustment easy one-handed usage due to a well-placed handle simple and smooth table movement left/right spindle rotation 100 mm diameter extracting connector Table dimensions 500 x 200 mm Drilling table height 760–900 mm Maximum drilling width 300 mm Maximum drilling depth 140 mm Spindle speed 2850 rpm Drilling chuck 0–16 mm Gisdovuq Dkepfx Abhjp S1 continuous work motor power 2.2 kW Power supply 400V Dimensions 770 x 920 x 1245 mm Weight 102 kg

Condition: used, Year of construction: 1997, - edge banding unit Godpfsd Inktjx Abhsip - Cross-cutting unit - Milling unit - Fine trimming unit - scraper - buffing unit

Year of construction: 2012, condition: used, functionality: fully functional, Large quantities of models B4-E2 and B8-E2 available in stock (5 and 10 tray versions). Sold as a complete set with hood and cabinet with tray holders. Technical specifications (B4-E2): Voltage: 400V, Frequency: 50 Hz, Operating current: 13 A, Connected load: 9.2 kW, Water pressure: 150 – 250 kPa. Technical specifications (B8-E2): Voltage: 400V, Frequency: 50 Hz, Operating current: 26.6 A, Connected load: 18.4 kW, Gjdow Sm Tgjpfx Abheip Water pressure: 150 – 250 kPa.

Condition: used, Year of construction: 1989, Used machine Godpfxow I U E Ao Abheip Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Gjdpswka N Tsfx Abhjip Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice