SCM OMM 250

SCM OMM 250

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Iiodsvz E Siopfx Ahnog Total power requirement 2,2 kw

Condition: excellent (used), MAWEG Gluing Press Ijdpfjyyn E Usx Ahneig Machine frame inclined at 10 degrees Single-sided loading Horizontal beam with manually adjustable height via hand crank (all clamping cylinders can be adjusted together) Hydraulic cylinders with quick clamping function, infinitely adjustable Manual hydraulic cylinder clamping Pressing force per hydraulic cylinder approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Maximum clamping length: 2800 mm Maximum clamping height: 1800 mm 4 vertical pressing cylinders 2 horizontal pressing cylinders 6 counter-stops Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are ex-location and are pick-up prices – loading included! • The machines have been cleaned and function tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planer cutterhead: Tersa Number of knives: 4 Isdehpl T Hopfx Ahneig Height adjustment: electric Indicator for planing thickness: mechanical counter Feed rate: 7-11-15-19 Infeed roller: steel, segmented Pressure bar: segmented Outfeed roller: rubber Table rollers: no Table extension: yes, infeed and outfeed Motor power: 7.5 kW Dust extraction connection: 160 mm Machine length: 1070 mm Machine width: 900 mm Weight: 750 kg

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Iodpfjd R Ev Dsx Ahnjig Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm spindle turning speed range 75 - 3.010 U/min feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg dimensions of the machine ca. 0,70 x 1,00 x 1,95 m - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 Iisdjwlvlaopfx Ahnjg - Cutting oil spray

Condition: excellent (used), Year of construction: 2000, Four-spindle moulding machine Number of spindles: 4 Ijdpfsy Enlfsx Ahnjig Spindle configuration: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Axial adjustment range of spindles: 30 mm Adjustment range of jointer spindle: 5 mm Jointer spindle motor: 5.5 kW Top spindle motor: 4.5 kW Vertical spindle motors: 7.5 kW Motors with brake Feed roller diameter: 140 mm Length of jointer table: 2,000 mm Pneumatic pressure for feed rollers Infeed roller upstream of first lower spindle, pneumatically actuated Left pressure roller before machine infeed CE compliant Including 4 planing heads Approx. dimensions (L x W x H): 3,000 x 1,250 x 1,550 mm Weight approx.: 1,000 kg Note on used machinery: • Technical specifications and prior sale subject to change. • Stated prices are ex works, free loading at location! • Machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment Iijdpfsy D U A Ijx Ahneg - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Iiedpjwuclxsfx Ahnsg Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Isdpfox Nbzusx Ahneig Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: used, Year of construction: 1973, Storage location: Nattheim Iisdpfovvkt Ujx Ahnsg