Wide belt sander

SCM sandya 10

Condition: excellent (used), functionality: fully functional, Motor power 11 kW First calibration unit with steel roller Second unit with rubber roller Belt cleaning blow-off Itedpfx Ahezz Nmyonol Working width 1100 mm Two feed speeds for sanding belts Stepless adjustable conveyor feed Electric table height adjustment Shoe with adjustable activation time Brush at workpiece outlet Pneumatic oscillation

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% Itodov Sq S Nopfx Ahnjl • Fully automatic and stepless control of belt speed • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Condition: excellent (used), working width 1100 mm calibrating unit with metal roller calibrating unit with rubber roller combination unit with rubber roller and pad activation of machine functions from the control panel pneumatic oscillation pneumatic belt tensioning motor power: 9KW and 9KW, total power 18.5 KW two feed speeds for the conveyor material thickness gauge Itsdpfx Aozyafwjhnel two feed speeds for sanding belts emergency stop switch

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Itodpfx Aowqdbmshnjl Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Itjdpfx Asg A D Anshnjl Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: Ijdjw Naanopfx Ahnetl The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Isdevvku Espfx Ahnotl

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3820, operating hours: 13,696 h, Workpiece length X: 200-3050 mm including roller conveyor Itsdpfx Aezlbwfshnel Workpiece width Y: 50-1250 mm Workpiece thickness Z: 8 - 80 mm Vector speed: X/Y = 50 m/min; Z = 15 m/min Equipment: VERTICAL BORING UNIT V 15 HIGH SPEED including quick-change system and spindle clamping HORIZONTAL BORING UNIT WITH 6 SPINDLES IN X DIRECTION HORIZONTAL BORING UNIT WITH 4 SPINDLES IN Y DIRECTION NUT SAW IN X/Y DIRECTION 90° PLAUSIBILITY CHECK (X/Y) TOOL CHANGING SPINDLE 9 KW including converter 4-POSITION PICK-UP CHANGER, side-mounted POSITIONING CYLINDER for workpiece positioning WORKPIECE CLAMPING SYSTEM WORKPIECE HANDLING MACHINE CONTROL: POWERCONTROL with Powertouch MACHINE OPERATION: POWERCONTROL SOFTWARE: WOODWOP; TOOL DATABASE; MACHINE DATA ACQUISITION; PRODUCTION LIST SOFTWARE; OFFICE PACKAGE; WOODWOP DXF IMPORT BASIC; WOODASSEMBLER; 3D SIMULATION Operating voltage: 400 VOLT; Frequency: 50 HZ Energy-saving function

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Itsdpfxoxg El Ae Ahnel Video available.

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Total spindle length: 140 mm Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment Itsdpfxoxbnyre Ahnol 4-roller feed Masterwood Feed speed adjustment via variator CE certified DTR technical documentation Year of manufacture: 2005