Edgebander

SCM Stefani MD HP

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 25167180701, functionality: fully functional, power: 4.5 kW (6.12 HP), workpiece height (max.): 60 mm, total height: 60 mm, total width: 1,000 mm, air demand: 2,000 m³/h, feed rate Y-axis: 50 m/min, feed rate Z-axis: 20 m/min, rotational speed (min.): 4,000 rpm, CNC machining center Manufacturer: Masterwood Model: Project TF 100 2.0 Technical specifications: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and the length-to-width ratio. Equipment/features: - Air tables in the working area - Roller support at infeed and outfeed - Panel measuring sensor Cjdpfoxz Hgdox Agkopw - Ball screw and linear guides - Rack and pinion drive - Centralized lubrication system - Import of DXF files Milling unit: Including Masterwork software extension Spindle speed: 1,000 to 18,000 rpm Motor (frequency-controlled): 3.3 kW Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 spindles for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Includes grooving saw blade, 2 diamond milling cutters, 1 WPL finish milling cutter Provision for CLAMEX and door processing package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit designed for door processing, for machine with tool changer, complete including special tool change position in changer, angle gear for holding a lock case milling cutter, macro for lock case milling Automatic, program-controlled central lubrication Camera for monitoring

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Cjdpfxet Hal De Agkepw Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Cpodpfx Agowd Itmekow Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Cpsdpfx Ajw I U Dregkew Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Year of construction: 2006 Machine no.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Round belt conveyor table Switch cabinet system Csdpfxsrnkw Dj Agkopw 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Cpodpfx Ajwuuc Aegkew

Condition: excellent (used), Year of construction: 2021, operating hours: 144 h, I will sell a water-abrasive jet cutting machine from Flow. Model Mach 100 The machine has worked 144 working hours The machine has been checked and valued by an expert from FLOW Cutting area 3x2 meters. The machine is in very good technical condition - used occasionally for own production, has only worked hours. Less than 2 tons of garnet processed. The machine is currently running and fully ready to work, it is possible to fully test it before purchase. In I have many spare parts for the device: - mixing tubes. - diamond orifices Cpodpfeurv Nvjx Agksw - mixing bodies - large service kit for the pump (major kit) - head covers The device has an attachment for piercing brittle materials such as glass, ceramics. Working area: Z-axis feed: 178mm Net cutting area X-axis min. 3,000 mm Y axis min. 2,000 mm Machine accuracy: On linear axis at 20 °C +/- 3 °C - linear positioning accuracy of X and Y axes: +/- 0.10 mm/m - repeatability of X and Y axes: +/- 0.06 mm (complete working area) Circularity test: : +/- 0.013mm Machine speed - Technological speed up to 10 m/min - Maximum shape speed: up to 5 m/min - Acceleration 0.05 g Light gate The light gate prevents entry into the front, rear and side of the machine in cutting mode. - FlowMaster PC control - Simple and logical user interface - user-friendly menu structure based on pictograms - unique creation of a cutting path with the possibility of modification with automatic generation of inputs and outputs and travel routes. - exclusive SmartStream technology - Every beginner becomes a professional - Ensures high-quality parts - Dynamic language switching: operators can work with the software interface in the language of their choice without having to restart the program - Context-sensitive tool tips and integrated Help function - Simple and fast definition of edge surface quality - Feed potentiometer from 0 to 125% - Automatic calculation of working times - PASER 4 cutting head - Paser 4 abrasive metering system - Paser CF900 abrasive storage and transport system - Flow HyPlex prime 30 ultra-high pressure pump - Flow UltraPierce piercing system - Technical specifications: - Designed for 4150 bar - 3800 bar continuous working pressure - 22 kW (30 HP) motor power - Maximum water flow 3.1 l/min - Maximum temperature at inlet 21°C - Air pressure 6.2 -8.3 bar - Mains voltage 400V, 50 Hz, 3 phases - Dimensions (W x D x H): approx. 1,524 x 914 x 1,033mm - Weight: approx. 850 kg - HyPlex Prime pump cover - HyPlex Prime hydraulic pump tool kit - HyPlex Prime tool kit - High-altitude piping package In addition, you can buy the device - Polish manufacturer Airpol modek k5 compressor, power 5.5kW - DSsystem pneumatic lift with 10 suction nozzles and sheet metal peeling system, lifting capacity 1 ton - Wiessmann water treatment plant

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Cpjdpfxsw Tivms Agkow Corner Rounding Unit: yes Operating Units: 9 nr

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Veneer edges limited possible up to max. 1.0 mm Panels thickness (min/max) 8 mm. 40 mm (with MFA) / 60 mm (without MFA) Numerical Control / Software ICOS Open Adjustable feeding speed (m/min ) 6 - 30 Top pressure system with driven rubber belt Spraying unit (Anti-sticking liquid) In-feed fence Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66) 0°-25° (max 30 m/min) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) by N.C. 08.342 (2 x Kw 0,66) servo Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617 (2 x Kw 0,25) Csdor Ttflepfx Agkopw Milling grooving unit 08.190 (1 x Kw 4,5)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, cutting dimensions 4300x4300 mm cutting height 95 mm beam feed with grippers 90 m/min cutting speed up to 150 m/min, infinitely adjustable main motor power 13.5 kW scoring saw motor power 2.2 kW blade diameter 350 mm Cjdpfeylbdtjx Agkjpw label printer 4 air tables extraction requirement 3800 m³/h external dimensions 6500x7700 mm