Facing lathe

Seiger SPL CG 1400

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 164 h, working width: 3,100 mm, operating speed: 8 mm/s, reverse speed: 75 mm/s, overall weight: 10,500 kg, total length: 4,500 mm, total width: 1,700 mm, total height: 2,500 mm, input voltage: 380 V, pressing force: 200 t, power of the servo motor: 15 W, With manual, part list and all available technical documents. Bodpfsvm Elaox Addolr

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Blsdpovxipgjfx Addor Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: good (used), Year of construction: 1991, Pressing force 1500 kN Working width 3100 mm Stroke 200 mm Motor 11 kW Dimensions LxWxH: 2100 x 2000 x 2800 mm Blodpfxsvy Hd Rs Addjr Weight 9,600 kg Incl. tools, see PDF

Condition: good (used), functionality: fully functional, working width: 3,100 mm, distance between stands: 2,550 mm, back gauge: 1,500 mm, pressing force: 110 t, Bending capacity: 110 Ton Bending length: 3.100 mm Distance between columns: 2.550 mm Back gauge: 1.500 mm Stroke length: 150 mm Throat: 250 mm Rapid approach speed: 100 mm/sec. Bsdpfx Aewi N T Ejddjlr Bending speed: 8 mm/sec. Return speed: 65 mm/sec. Controller: ESA Kvara S630 Touch Featured with: - Foot pedal - Various tool sets - Light screen security Merlino - Controls renewed in 2018 Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8.700 kg

Condition: excellent (used), Year of construction: 2005, Hurco VMX 42, year 2005, Nikken 5-axis table x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm Control: Ultimax 4 Spindle speed: 10 - 10,000 rpm (operator states 12,000 rpm) Tool holder: SK40 Bodpfxjw Al Hze Addjlr Tool magazine: Drum magazine with 40 stations Feed rate XYZ: 3 - 7,000 mm/min Rapid traverse XY: 30 m/min Rapid traverse Z: 20 m/min Table size: 1220 x 510 mm Table load: 1.1 t

Condition: excellent (used), Year of construction: 2011, pressure 100 t Bedpfx Asvzcm Djddjlr chamfer lenght 2250 mm distance between columns 2050 mm Stroke beam 275 mm max. opening beam/table 410 mm C-recess 300 mm max travel X-axes 550 mm Z1+Z2 axes controlled by cnc manuell, 4 Anschlagfinger mm max. distance R-axes 130 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 13000 h length 3500 mm width 2000 mm height 2600 mm weight 5700 kg total power requirement 9 kW dimensions of the machine ca. 4x2x2,7 m All machines can be viewed under power at all times. Demonstrations of the machines possible at any time. All machines can be inspected at any time under power and demonstrations of the machines are possible at any time. Light barrier protection front motorized adjustable (Fissler) Rear Sick light barrier protection Manual crowning Promecam tool holders

Condition: good (used), Year of construction: 2009, machine/vehicle number: 83339, Offer 25270 Technical Data: - Pressing force: 135 t - Working width: 4300 mm - Distance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 400 mm - Approach speed: 70 mm/sec - Working speed: 10 mm/sec - Return speed: 80 mm/sec Bledpfow H N D Esx Addjr - Ram stroke: 200 mm - Pneumatic connection - Drive: 400 V / 15 kW - Space requirements: approx. W 4800 x H 2900 x D 1900 mm - Weight: approx. 12,800 kg - Includes: - Swivel arm – operator panel with 8-axis FastBEND control - Safety light curtain - Crowning system - Pneumatic upper tool clamping - Motorized backgauge - Various upper and lower tools - Separate tool cabinet with mobile racking (BEDRUNKA - HIRTH) - Two-hand operation console, foot switch,

Condition: used, Year of construction: 2000, total length: 3,700 mm, total width: 2,000 mm, total height: 2,750 mm, Weight: 8.500 kg Price: On request - Year: 2000 - Documentation available: No - CE marking present: Yes Bljdpfx Adjw Igwqsdor - CE certificate present: No - Serial number: 752200069 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-80 - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 120 - Max. working width [mm]: 3000 - Column gap [mm]: 2600 - Backgauge depth [mm]: 500 - Max. stroke [mm]: 80 - Control type: Cybelec DNC-80 - Control: CNC - Transport dimensions: 3700mm x 2000mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, ---IMAL Hydraulic Press Brake 3000x100 Ton (Red-White), 4 axes, throat depth 500 mm. Overall dimensions: 400x180x260 (H) cm, weight 7,000 kg (70 ql.) Blsdpfx Adjwyndwodsr ---IMAL Hydraulic Press Brake 3000x100 Ton, manual back gauge, throat depth 350 mm. Overall dimensions: 355x135x265 (H) cm, weight 6,300 kg (63 ql.)

Condition: good (used), Pressure 110 Ton Bjdpfx Asw Hx Rzeddelr Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp