Mobile exhaust system

Spänex SMU 6000.1

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Ijdpfov Rpxlsx Adwoal Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, TERSA cutterhead with 4 knives, 5.5 kW motor, 400 V, 50 Hz, electronic start and brake unit. Thickness table adjustment with buttons for rapid or slow feed, as well as fine adjustment accurate to 1/10 mm. Integrated operating hours counter. Thickness table mounted on 4 support spindles and 4-way guided. Two feed speeds: 7 and 14 m/min. One rubber feed-in and one rubber feed-out roller. Two extraction ports Ø 160 mm. Slide for top extraction. Planer guard system SUVAMATIC. Motor power 7.5 kW. Positioning control including sensor monitoring. Ijdpfxjx Ey Tzj Adwsal

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 25-28/2018, nominal flow rate: 2,500 m³/h, total width: 750 mm, total length: 2,000 mm, total height: 1,980 mm, compressed air connection: 6 bar, power: 3 kW (4.08 HP), SPÄNEX dust extractor, type SMU 25 Connected load 380V 5.6A 3kW Weight approx. 400 kg mobile Suction nozzle 180 mm Vnenn 2500 m³/h Manual-automatic operating mode Electric-pneumatic filter cleaning pneumatic connection 6 bar HxLxW: 1980 x 2000 x 750 mm Iaedpfx Adotwp Nzjwsl

Condition: new, Year of construction: 2025, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 Iodpfxegyfmaj Adweal • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Iajdpfjxq Elwex Adwjl

Condition: new, Year of construction: 2025, Suction nozzle diameter: 260mm Nominal volume flow: 7700 m³/h scavenging bag volume: 2 x 290 l Filter cleaning: manual Engine power: 4,8 kW Dimensions: 1900 x 670 x 2800 mm (L x W x H) Iaodpfx Ajhw I Szedwol Weight: 88 kg

Condition: new, Year of construction: 2025, extraction capacity ~ 6500 m3/h engine power 5.5 kW rotation speed 3000 rpm Iasdsv Du Tnspfx Adwol nominal voltage 400 V, 50 Hz extraction nozzle 280/200 mm extraction speed 28 m/sec. Number of filters 35 DIMENSIONS (length x width x height) 920 x 2100 x 2250 mm weight 410 kg Filter category G Filter material polyester Noise level 80 dB without connection / 65 dB when connected via pipe to the machine Filter surface 17.1 m2 Negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Drive system Filter cleaning using vibration system with control + 850 euros for the models with fire extinguisher (Safe System) + 500 euros for the models with inverter (speed control)

Condition: new, Load Weight Shelf 21000 kg Iodpfx Adjfgyg Iowsal Loading weight per level 3000 kg Number of load levels 7 Stk. Recommended material length 6000 mm Column width 2 x 2000 mm Shelf height 2440 mm dimensions m

Condition: new, AL-KO POWER UNIT 250 P - Exhibition unit - Integrated pre-separator, integrated automatic extinguishing system ----- Technical Data ----- Extraction nozzle Ø: 250 mm, nominal airflow: 3,534 m³/h, max. airflow: 4,900 m³/h, max. negative pressure: 3,184 Pa, filter area: 22.4 m², chip collection volume: 2 x 250 liters, number of bags: 2 pieces, motor 400 V: 7.5 kW, dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, sound pressure level: 71 dB(A), weight: 758 kg, according to: GS - HO - new exhibition machine - Isdpfx Aewu Hatedwjal

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2100x920x2250 mm Weight 410 kg Iajdjvz Eriepfx Adwel Total power requirement 5,5 kw