Stacking container container metal container

SSI Schäfer / Feuerverzinkt / 3 Stück / Abm.: 850x550x670mm (BxTxH) / 4 Kranösen

Condition: good (used), functionality: unexamined, overall weight: 80 kg, total width: 990 mm, total height: 870 mm, total length: 1,180 mm, stack height: 800 mm, tank capacity: 900 l, empty load weight: 80 kg, We hereby offer you, without obligation, around 200 used steel stacking boxes and storage containers made of galvanized steel sheet. Manufacturer: unknown Dimensions of the stacking box (overall): 1180 x 990 x 870 mm (L x W x H) Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/unit Note: The steel stacking boxes were used by the previous owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers was carried out using a forklift with a rotating fork. For this reason, the stackable containers are manufactured with extra thick-walled construction. Sale takes place without obligation, excluding warranty and guarantee, to commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Hedpfjvtckmsx Ag Nei Your service team, Mertens & Frowein GmbH

Condition: new, 30 / 900 mm 30 / 900 mm L-beam 35X35X5 / 600 mm T - beam - web outwards 50x6 / 600 mm Axis diameter 40 mm work speed 4,5 m/min roll diameter 148 mm total power requirement 1,1 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,75 x 0,6 x 1,4 m Electric profile roller - Either horizontal or vertical working - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm / 1 " - Operation manual Hsdpfx Agjq Adtqe Noi - Foot switch left / right and EMERGENCY STOP

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Hjdpfx Agemhhyaj Nji The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Hjdpfemhh Dzjx Ag Nei - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, overall weight: 70 kg, inner dimension length: 1,200 mm, inner dimension width: 800 mm, inner dimension height: 800 mm, load capacity: 1,000 kg, total length: 1,240 mm, total width: 835 mm, Hello I sell new Gitterbox containers hot-dip galvanized Weight 65kg Load capacity 1000kg Stacking 1 + 3 pcs. Ral 7030 gray-stone Dimensions 1240X835X970 height. Price 162 eur/net/piece. Hedpjupuqasfx Ag Nji

Condition: excellent (used), overall weight: 70 kg, inner dimension length: 1,200 mm, inner dimension width: 800 mm, inner dimension height: 800 mm, load capacity: 1,500 kg, empty load weight: 70 kg, total length: 1,240 mm, total width: 835 mm, total height: 970 mm, mesh size: 50 mm, We offer used hot-dip galvanized Gitterbox containers with dimensions of 1240x835x970 mm and steel plate bottom. These containers are fully functional and undamaged. Available in large quantities. Rental is possible. Available with one door or two doors on the long side. We speak Polish, German, and English. This price applies only to full truckload orders. We do not ship individual items or small quantities. Hedoxzinqjpfx Ag Noi

Condition: new, machine/vehicle number: 85162, machine: new piston hydraulic membrane pump type: Abel HMD-G-50-500 Flow rate: max. 10 m³/h Discharge pressure: 15 bar Motor: 5,5 KW, 400 V, 50 Hz, 1500 rpm, - with blower : The pump is controlled via frequencly converter.: Hjdpfjd E S Sfsx Ag Nei

Condition: used, functionality: fully functional, machine/vehicle number: H2X387L00867, Year of construction: 2022, operating hours: 1,108 h, load capacity: 2,300 kg, lifting height: 4,400 mm, free lift: 1,320 mm, fuel type: electric, mast type: triplex, construction height: 2,090 mm, fork carriage width: 1,150 mm, fork length: 1,100 mm, empty load weight: 3,702 kg, total length: 2,350 mm, drive type: Elektro, construction width: 1,150 mm, Electric 4-wheel forklift Chassis number: H2X387L00867 Load center: 500 mm Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Hjdpfswz S Dwex Ag Nei Front tire type: Superelastic Front tire size: 23x9-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 200/50-10 Rear tire condition: 60 - 80% Battery voltage: 80V Battery capacity: 460Ah Battery manufacturer: Linde Battery type: PzS Battery year of manufacture: 2022 Battery condition: 60 - 80% Description: The machine is fully functional and equipped with the latest UVV safety inspection. A charger is integrated into the forklift. Slight reddish discoloration due to previous use in metalworking. Sideshift, 3rd valve, 4th valve, rear working light, front working light, full cabin, full free lift, interior mirror, beacon,

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-80-200-PPV-A -Piston: Ø 80 mm -Stroke: 200 mm -Max. Pressure: 12 bar -Dimensions: 420/95/H95 mm -Weight: 5 kg Hedpfx Aged S Dais Nji

Condition: used, A used hot-dip galvanized steel stacking bin, made according to Euronorm dimensions 1000x800 mm, is a robust and durable solution for storage and transport. The hot-dip galvanization provides excellent protection against corrosion, which extends the life of the bin, even in harsh industrial environments. These Euronorm dimensions Hedjw Sw Emepfx Ag Noi