Machine vice

Stahl Typ 310/495

Year of construction: 1994, condition: excellent (used), TECHNICAL DATA: LENGTH OF WORKING ARM: 1600 mm MAX. CUTTING THICKNESS with 130 mm blade: 45 mm MAX. CUTTING THICKNESS with 160 mm blade: 70 mm MOTOR POWER: 0.75 kW – 380 V / 50 Hz NEON LAMP VOLTAGE: 220 V BLOWING DEVICE TO CLEAN THE WORKING AREA: ELECTRONIC, 220 V WORKING TABLE: 1000 x 2000 mm DIMENSIONS: 2400 x 1000 x 1700 mm WEIGHT: 230 kg Bsder Hmtkjpfx Aqxoww

Condition: used, machine/vehicle number: 1380A, mileage: 20,481 km, power: 179 kW (243.37 HP), first registration: 07/1984, fuel type: diesel, overall weight: 16,388 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, crane, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a good condition directly from the Army , Well maintained and maintained, the body is in good condition (vehicle from the reserve) therefore the paint is bad and partially flaked , The M936W / W is equipped with: All-wheel drive, 5-speed automatic gearbox, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body is a 5-ton telescopic crane with an extension. The vehicle is equipped with: front thread, heavy rear thread, tractive force 12474kg, mountain support (these can be attached to the front, rear and side, 4-point support can be extended laterally, various accessories, the km are miles, driving license class 2 (truck), tire size 11.00R20 (very good condition), top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M936 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timerr AM Generalist drives really great makes a lot of fun . - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Bodpfx Aqjqx S Adsxjww

Condition: used, Combined disc + vertical belt sander Disc diameter: 600 mm Encumbrance: 110 x 80 cm, height 160 Bodpfslagdwex Aqxsww

Condition: used, Edge sanding machine Holzmann KOS2510, good condition, standard equipment, 2510 mm belt length, 150 kg Bwjdpfx Aqowzzf Rjxew Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: new, Year of construction: 2025, spindle bore: 51 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 250 mm, center height: 200 mm, turning length: 1,000 mm, total length: 1,900 mm, total width: 750 mm, total height: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 40 rpm, type of input current: three-phase, overall weight: 1,550 kg, three-jaw chuck diameter: 200 mm, Centre distance ----- 1000 mm Centre height ----- 200 mm Swing over bed ----- 400 mm Spindle bore ----- 51 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 3 KW Weight ----- 1550 kg INCLUDES * 3-axis digital readout brand SINO * Multifix quick-change tool post type TOOB2 with 4 holders * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm * Faceplate 250 mm Bwedeymd Drepfx Aqxow * LED work lamp and coolant system * Fixed and travelling steady rest

Condition: good (used), two-armed drill, rotary drill, magnetic drill, impact drill, two-hand drill -Taper: MK with drill chuck -Nominal consumption: 250 W -Connection: 220 volts Bodpfefc Hf Aex Aqxsww -Max. Drill: Ø 15 mm -Dimensions: 420/420/H120 mm -Weight: 7.1 kg

Condition: used, High-capacity funicular mounted on a MAN 6x4 chassis truck - Maximum working length, line of 2,000 m - MAN 400 CP truck chassis Bwsdpfet Nf Ipsx Aqxew - 12 m tower equipped with 6 hydraulic anchors - Possibility of mounting the funicular in the lower position (valley) or in the upper position (mountain), in other words, the funicular can pull logs from top to bottom or from bottom to top - Trolleys with 50 m cable reserve (for easy manipulation), verbally activated with remote control station + 2 additional Trolleys - Various spare parts - The machine is registered in Romania and can be driven on public roads - Good working condition. It was used very little. Purchased from the Austrian Forestry Directorate. Installation in very good working condition. Belwo you can find our offer for VOLVO L180E. For this machine, no professional description is needed, as you can see all the details in the attached photos.

Condition: as good as new (ex-display), Year of construction: 2022, Belt width: 150 mm Belt length: 2400 mm Veneer sanding attachment: no Oscillation: yes Roller diameter: mm Sanding unit can be swiveled: yes / 90° - 0° Work table: 730 x 300 mm Extension table: 420 x 400 mm Belt speed: 14 m/s Dust extraction connection: 120 mm Motor power: 1.8 kW / 400V Machine length: 1480 mm Bwsdjhpmadspfx Aqxew Machine width: 680 mm Weight: 160 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 305 x 50 mm -Clamping depth: max. 270 mm Bedsdz Umqjpfx Aqxjww -Machine vice: rotatable -Dimensions: 590/305/H170 mm -Weight: 87 kg

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Bwsdpfxey Nfqmj Aqxsw Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.