Pendulum Saw

Stromab PS 600 P

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl Rsdpfx Ajrx Tatjdrst - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm max. cutting height 170 mm motor 11 kW Rsdpfexiu Dtex Adrjt

Condition: excellent (used), total width: 4,000 mm, total height: 7,000 mm, clearance between the columns: 2,000 mm, shelf length: 900 mm, Equipment: double-sided, Consists of 3 double-sided uprights, height 6000 mm Rjdpfxeulufpe Adrjt 9 shelves with arms 750 mm long Load capacity per cantilever arm: 900 kg Load capacity per level: 2700 kg Load capacity per upright front: 8100 kg Distance between uprights: 2000 mm

Condition: used, Year of construction: 1999, power: 3 kW (4.08 HP), input voltage: 400 V, cutting height (max.): 200 mm, saw blade diameter: 520 mm, overall weight: 350 kg, cutting length (max.): 420 mm, mount diameter: 50 mm, saw drive: 3,000 W, No. 04511 Rjdpeyh Nfuofx Adrot Crosscut and mitre saw Graule ZS 200 N Used, year of construction 1999 Saw can be swiveled and tilted 3 kW three-phase brake motor 400 V Saw blade diameter 520 mm Saw blade holder 50 mm Cutting height 200 mm Saw blade tilted to 45°: Cutting height 140 mm Cutting length 420 mm Table dimensions 900 x 700 mm LW Aluminium fence back With machine stand and hand crank at the rear for tilt adjustment Hydraulic feed brake Pneumatic material clamping on both sides from above Saw blade spray device for coolant or lubricant Carbide circular saw blade for aluminium and plastics, diameter 520 mm Roller conveyor type RLK 4000 mm, with fold-away material fence and scale Roller conveyor 4000 mm long after the saw Roller conveyor width 350 mm Transport dimensions machine approx. 1650 x 1200 x 1850 mm LWH, roller conveyors approx. 4500 x 400 x 1950 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 1998, condition: ready for operation (used), A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible. Redpjwv Umwsfx Adrst

Year of construction: 1990, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN7088302, For sale Used Demag single girder overhead crane ± 11,365 mm x 5,000 kg We can optionally supply the cranes including: * adjust in length * Assembly and inspection * conductor rails * radio control Jan Reiling B.V. also supplies new cranes completely customized at very competitive prices. * overhead cranes * hanging cranes * jib cranes * KBK installations * boat lifts Rodpsv Ipr Hjfx Adrjt All our new and used cranes that we supply (within NL and BE) are supplied including warranty! In addition, we have our own stock of approx. 15,000 Demag parts. For more information, see the website of Jan Reiling B.V. keywords: Cranes, crane, roller bridge, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, bruckenkrane, workstation crane, lagerkrane, hebezeuge, cranes, universal crane, hoist. Overhead crane, laufkrane, overhead crane. Enke

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Three-spindle underfloor milling machine from RUWI Professional equipment for the workshop This underfloor milling machine enables simple chamfering, rounding, profiling, grooving, grinding and various other milling tasks to achieve the desired result quickly. Quick tool changes are possible thanks to the handy tool store. Set-up times are increasingly eliminated with the larger models. Costly and time-consuming fine adjustments and trial milling, equipped with all important tools, are no longer necessary. The spindle can be infinitely adjusted to the correct working position. This model is ideal for use in the workshop and is often used for final processing. Made in Germany. Rsdpfjrk Tqkex Adrst Features and technical data: - High-quality workmanship - 3 tools on call - Control electronics prevent speed fluctuations under load - Robust and heavy-duty motor - Motor with overload protection - Temperature monitoring with PTC resistor. - Soft start and starting current limitation - The counter-rotating return thread above the ball bearings prevents the ingress of dust and dirt - Quick tool change - Dust extraction above and below the table plate - 1x fine adjustment - Incl. stop ruler - Incl. fastening set for table extension - Convenient tool change from above - BG and wood dust tested Technical data: - Table size: 640 x 500 - Table height: 910 mm - Infinitely variable speed control: 8000 - 25000 rpm - Tools on call: 3 - Milling stroke: 43 mm - Motor power: 1050 watts for continuous industrial use - Voltage: 230 V - Milling spindle: 22 mm diameter - Collets: 8 mm (standard) optionally also 6 mm, 6.35 mm and 10 mm - Suction connection: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: short term Location: Solingen

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. Rodpfxjdy Hm Dj Adret 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Rsdpfx Ajucfwpodrjt

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Rsdpfeh Ek Daox Adrot When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.