Hydraulic press brake

TRUMPF TruBend 7036

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, pressing force: 37 t, number of axes: 6, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: TRUMPF TASC 6000 (15") • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming Ncsdpjx D D Hyofx Aqvot • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: refurbished (used), Year of construction: 2010, XXL-Center RAS 75.06 - General technical data in mm: Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper claws travel range: 10 – 750 mm Clearance in front of the jaws up to: 300 ° Extendable loading tables: yes Gripper claws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor-driven; 400V, 50/60 Hz, 3-phase Year of manufacture: 2010 Condition: Will be completely overhauled Ncsdpfox Hf Tvjx Aqvot - Images are examples -

Condition: used, Year of construction: 2011, pressure 36 t chamfer lenght 1020 mm distance between columns 932 mm throat 150 mm stroke 120 mm useable dayligth 295 mm Y-working travel 10/25 mm/sec Y-rapid travel 220 mm/sec work height max. 1150 mm weight of the machine ca. 2.600 kg Ncjdpfx Aqey Ig Rrsvot dimensions of the machine ca. 1805x1330x2380 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Nedoy Igbdjpfx Aqvjct Bending length: 1020 mm Distance between uprights: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Accessories: - Light barrier - Foot switch - Side safety doors - Wila tool clamp - Trumpf TASC 6000 control - 6-axis backgauge

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Nedporpn Dvjfx Aqvect

Condition: used, Year of construction: 2011, machine/vehicle number: B0702A0651, functionality: fully functional, operating hours: 30,858 h, input voltage: 380 V, input frequency: 60 Hz, type of input current: three-phase, pressing force: 36 t, operating speed: 220 mm/s, table length: 1,000 mm, overall weight: 2,600 kg, year of last overhaul: 2011, Equipment: CE marking, safety light barrier, The equipment has been fully maintained and is ready for immediate operation. The equipment has been in operation for 30,858 hours, and there are no operational issues (line laser not working). If you wish to use the line laser, it can be repaired for an additional fee. The cost is approximately 600 EUR. - Press beam OK - Block laser OK - Illumination (auto) OK Nsdpfsyytuhjx Aqvsct - Line laser Not OK I would prefer the buyer to be familiar with the TruBend7036. If purchased in South Korea, I can provide free operator training.

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Nodeyrf Dkepfx Aqvjct Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table Nsdpfxeqvm Uko Aqvect - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: B0702A1678, functionality: fully functional, operating hours: 30,979 h, input voltage: 400 V, stroke length: 120 mm, operating speed: 25 mm/s, reverse speed: 220 mm/s, table height: 955 mm, throat depth: 150 mm, total length: 1,900 mm, total width: 1,800 mm, total height: 2,390 mm, overall weight: 2,600 kg, working width: 1,020 mm, bending force (max.): 36 t, distance between stands: 932 mm, installation height: 2,390 mm, control type: CNC control, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, Machine condition Technical condition: very good, fully operational Used in clean conditions, no structural damage Can be tested and inspected on site Full documentation available for inspection Key features and equipment Bending force: 36 t (360 kN) Bending length: 1020 mm Throat depth: 150 mm Ncjdpfxsx Apgvs Aqvjt Beam stroke: 120 mm CNC control: TRUMPF TASC 6000 / Touchpoint TruBend Backgauge: 6-axis (X, R, Z1, Z2, Y1, Y2) Working speed: 25 mm/s Rapid return speed: 220 mm/s Technical data Distance between stands: 932 mm Installation height: 2390 mm Table height: 955 mm Rear stop range X: 600 mm Z-axis range: 0–1020 mm Weight: 2600 kg Installed power: 7 kW Power supply: 400 V

Condition: ready for operation (used), Year of construction: 2012, operating hours: 33,318 h, pressing force: 87 t, total width: 1,800 mm, total height: 2,840 mm, overall weight: 8,300 kg, controller manufacturer: TRUMPF, controller model: TASC 6000, product length (max.): 3,020 mm, number of axes: 6, This 6s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details. • Operating hours: Machine 33,318 h; Hydraulics 15,786 h • Clearance: 1,750 mm • Usable installation height: 385 mm (optional increased: 615 mm) • Throat depth: 420 mm • Operating interface: Touchpoint TruBend • Max. Y-axis speed (operating step, optional): 25 mm/s Technical Specification Ncsdoyhp Edspfx Aqvet Bending Length 2210 mm