Laser cutting machine

TRUMPF TRUMPF 5040 FİBER L76

Condition: new, Year of construction: 2025, table length 3000 mm table width 2000 mm table height 200 mm weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 3000 mm • Height 200 mm • Weight 1700 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) • Plate thickness: 25mm Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height Dsdpfxjuia Nts Addjla of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: Height 6500 mm Width 3670 mm Depth 1560 mm 46 supports with a payload of 305 kg each Dlodpfxjrw A Eio Addea In the clear usable dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain pitch 254 mm Additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: as good as new (ex-display), Generator unit in an insulated container The system is in absolutely new condition (104 operating hours). Krampitz tank is installed inside the container and filled with 500 l of diesel. Engine: IVECO Generator: STAMFORD Continuous output: 20 KVA / 16 kW Frequency: 50 Hz Rated current: 28 A Voltage: 400 V / 231 V Speed: 1500 RPM Weight: approx. 4000 kg SÄBU container / Dimensions: 4.00 m long, 2.60 m wide, 3.05 m high - Control panel - Ventilation system for fresh air and exhaust - 700-litre tank - Sound and heat insulated container Dljdjiw Ed Hjpfx Addsa Loading and transport available as an option. Only serious and genuine inquiries will be answered, with the following information: Name, e-mail address, and telephone number.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Dljdpfxjxn Tywj Addja Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: used, Used edible oil refinery with capacity 150 tonnes/day of edible oils. Plant includes (3) GEA type RSB100-01-076 separators that can produce 300 tons/day, but the rest of the plant is maximum 150 tons/day. Refinery can process soya, rapeseed, peanut; and also sunflower and corn oil because it includes winterisation step for waxes separation. Major equipment / sections include:- neutralisation, caustic soda dosing, separation for dewaxing, filtration, deodorisation, biomass boiler, water treatment system. Dlodpfx Adjw U A H Usdea

Year of construction: 1999, condition: good (used), Nail lenght range - 50 - 90mm Dledpfx Aodmbp Usddea Speed - 100 nails/sec. ( frequency regulator ) Management - PLC Simens S5

Condition: excellent (used), Timesavers Series 42 WRB Machine technically overhauled, operates flawlessly. 1st station: Grinding unit for removing pronounced burrs and splatter; surface finishing with Scotch band is also possible. 2nd RB brush unit, 8 deburring rollers for all-around, uniform edge rounding. Working width of 1350mm. Vacuum conveyor belt Conveyor belt speed infinitely adjustable via potentiometer Brush speed infinitely adjustable via potentiometer Part thickness from 0.8 to 100mm Djdjxl A D Tspfx Addela Additionally included: dry dust collector Machine available from mid-November. For further questions, feel free to contact us directly.

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm Dledevhc Stopfx Addoa MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Optical resolution 11nm Dlsdpfx Adsn Arm Tjdea Scattered light

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 73,483 h, machine/vehicle number: A0435A0050, laser hours: 44,000 h, laser power: 3,000 W, For sale: Trumpf TruLaser Cell L45, a high-precision 5-axis 3D laser cutting system, ideal for demanding applications in automotive, aerospace, and general engineering. Built in 2011, the machine is equipped with a 3000W TRUMPF laser source and offers excellent performance on complex components, tubular parts, and deep-draw metal forms. The machine is currently disassembled, professionally prepared for shipment. While on-site inspection is possible, test cutting is not available due to its current state. Key features: • TRUMPF laser source (3000W) – excellent power and reliability • Multi-axis 3D capability for intricate parts and precise detailing • High-speed and high-accuracy processing for both small batches and series production • Machine ready for international shipment, carefully disassembled • Includes full documentation and technical history from TRUMPF Machine details: • Year of manufacture: 2011 • Laser power: 3000W • Condition: Disassembled, stored securely indoors • Inspection: Available on-site (test cuts not possible in current state) • Serial number: A0435A0050 • Location: LeTheil, France • Availability: Immediately Extras & Services Offered: • We offer a complete turnkey logistics solution, including: • Professional disassembly • Loading and transport (domestic and international) • Delivery to final installation site • Reinstallation with qualified technicians Dlsdeqgcn Sepfx Addea • Commissioning and setup until fully operational • Optional post-installation support available on request • Attractive pricing due to current disassembled condition This is a unique opportunity to acquire a high-end Trumpf 3D laser cutting machine with full service and support, at an excellent price-performance ratio.